Tag: LXDE

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 220505 with Refracta Snapshot (so you can create your own Raspberrypi Debian 11 Pixel system)

NEWS 220505 about Raspberry Pi Debian 11 Pixel – 32bit – an Exton Build
My previous Debian Pixel Build from is from 201108 . Study all included packages in Build 220505 – latest by 220505. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

Most important changes in Build 220505
This build replaces version 161223 , 170425, 180316, 180928, 190705, 191102 and 201108 . I’ve upgraded Raspbian/Debian from Buster to Bullseye – Debian 11. I’ve also upgraded the kernel from 4.19.0-12-686-pae to 5.10.0-13-686-pae. I’ve also included kernel 5.10.0-13-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies. In Build 220505 I have removed Chromium. I saw no advantage in keeping it. You can run the system in full screen in VirtualBox. That’s because VirtualBox’s Guest Additions are pre-installed. Watch this screenshot.

NOTE

This Debian PIXEL 32bit build is for non-efi computers.

UNIQUE?
As far as I know there is no official Raspberry Pi OS (Raspbian) image with Debian 11.

SCREENSHOTS
Screenshot 1 – Debian PIXEL running in VirtualBox in full screen
Screenshot 2 – Refracta Snapshot has started
Screenshot 3 – Refracta Installer has started
Screenshot 4 – The installation is ready

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

RaspArch Rpi4 Build 220216 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.17, Win32 Disk Imager or Etcher in Windows!

RaspArch Build 220216 especially for the new Raspberry Pi 4 released in May 2020
This version (220216) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

ArchEX (Arch Linux) Live with Deepin 20.4, GNOME 40, Gnome Classic, LXQt 1.0.0, LXDE, kernel 5.16.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220206

NEWS about ArchEX 220206
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.4 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 22.1. So I thought why not install Deepin also in ArchEX? Furthermore I have added the GNOME 40 (latest) and LXQt 1.0.0.1 (latest) Desktop environments. As “extra Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 40/Gnome Classic/LXQt/LXDE.

REPLACEMENT
This version (220206) of ArchEX replaces version 210526. I’ve replaced Yaourt with YayYet Another Yogurt – An AUR Helper Written in Go. I came to know that Yaourt is dead. I.e. Yaourt is not being developed anymore. So in the new version of ArchEX I have upgraded all included packages, installed a new kernel (5.16.5) and replaced Yaourt with Yay. NOTE: While running ArchEX LIVE (from a DVD or USB stick) you can now do so super fast from RAM. Watch this screenshot. I.e. use boot alternative 3 (Copy to RAM). In this new version I’ve also added more support for Broadcom WiFi cards. I.e. kernel modules b43 and wl will be loaded from boot.

WHO should run Arch Linux?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 40 Desktop
ArchEX LXQt Desktop
ArchEX running in VirtualBox with Guest Additions installed
ArchEX running in Qemu
ArchEX Gnome Classic Desktop

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux Systems

CruxEX 2022 (CRUX 3.6.1) 64bit Linux Build 220104 – Install it to a USB Pen Drive and enjoy PERSISTENCE!

LATEST NEWS ABOUT CruxEX 220104
I have released a new version of CruxEX today. This version has VirtualBox Guest Additions pre-installed, which means (among other things) that you can run CruxEX in VirtualBox in full screen. Read about how to install and run CruxEX from a USB stick in VirtualBox. Watch a screenshot when CruxEX is running i VirtualBox in full screen. (Using VirtualBox Guest Additions).

CruxEX 2022 64 bit Linux Live USB is based on CRUX 3.6.1 (latest version, released 201212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.6.1 2022 uses the LXDE Desktop environment. I have replaced the original CRUX kernel 5.10 with “my” special kernel 5.15.12-exton-amd64, with support for “extra everything”.

Replacement
My first remaster of CRUX 3.6.1 is from 201223. Now (220104) I have upgraded all included packages and replaced kernel 5.9.15-exton with kernel 5.15.12-exton-amd64. Study the most important upgraded packages.

Kernel and installed packages
Kernel 5.15.12 is the latest available stable kernel as of 220104. Among all installed and updated applications are Firefox, Google Chrome (for Netflix), GParted, PCManFM, Pulseaudio, Slim Login Manager, Gimp and NetworkManager. Furthermore compilation tools so that you can install programs from source. Note: Google Chrome is not in CRUX repositories. Nvidia Graphics Driver 470.94 is pre-installed. It will be automatically used if your computer has support for it. Furthermore I’ve installed VirtualBox Guest Additions so that you can run CruxEX in full screen in VirtualBox. Watch this screenshot.

Unique
CruxEX 3.6.1 2022 build 220104 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading. The good thing with CruxEX is that it is a live system (which CRUX original isn’t) and that you can run CruxEX super fast from RAM. Also that you can install CruxEX to hard drive in about 5 minutes and then have a ready-to-go CRUX desktop system. You can after that install any (extra) desktop environment you like. NOTE: You can (of course) install new Desktops environments and other stuff also when running CruxEX from a USB stick – PERSISTENCE! Note also: To make CRUX original ready for everyday use will normally take 2 – 3 days!

SCREENSHOTS
1. The LXDE Desktop for the live user
2. The LXDE Desktop for root
3. Prt-get in action

4. CruxEX running from USB in VirtualBox
5. The USB live boot screen
6. Netflix running in Google Chrome
7. Wireless connection

8. Running Alsamixer for sound
9. Spotify Web Player is running

Study ALL installed packages…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

RaspEX Rpi4 based on upcoming Ubuntu 22.04 LTS “Jammy Jellyfish” with LXDE, kernel 5.10.87-exton-v7l+, Raspotify, RealVNC, PuTTy, Samba and Bluetooth :: Build 211221

NEWS 211221 about RaspEX with LXDE based on upcoming Ubuntu 22.04 LTS Jammy Jellyfish.
I have upgraded the whole system and replaced the old kernel 5.4.83-exton-v7l+ with kernel 5.10.87-exton-v7l+. RaspEX Build 211221 is a Linux ARM system for Raspberry Pi 4 with 2GB/4GB/8GB RAM and Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B. It is based on Debian, Ubuntu 22.04 LTS and Linaro (Open Source software for ARM SoCs). Both Firefox and Midori Private Browser are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 211221.

More about RaspEX

RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) with many other useful programs pre-installed. Firefox is used as Web Browser and Synaptic as Package Manager. You can use Samba and RealVNC to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Kernels
Kernel 5.10.87-exton-v7l+ (for Rpi 4) and 5.10.87-exton-v7+ (for Rpi 3/2) are used in Build 211221.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Bullseye) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. If you use the new Raspberry Pi 4 RaspEX will run even faster!

SCREENSHOTS
Screenshot 1 – raspex’s Desktop 211221
Screenshot 2 – root’s Desktop 211221
Screenshot 3 – running YouTube in Firefox
Screenshot 4 – RaspEX connected to Windows 10 via PuTTy
Screenshot 5 – RaspEX “running on” Windows 10 with VNC-viewer
Screenshot 6 – RaspEX using Pavucontrol (for sound control)
Screenshot 7 – RaspEX running Raspotify

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

LFS EXTON – a live installable Linux system built from Linux From Scratch 10.1 and Beyond Linux From Scratch (BLFS) with the latest packages and scripts :: 210706/210703

LFS EXTON Linux live DVD/USB is built using Linux From Scratch 10.1 and Beyond Linux From Scratch 10.1 (BLFS) , which has the latest Linux packages and scripts.

NEWS 210706
I finally made Refracta Installer to work in LFS EXTON! Now you can install LFS EXTON to hard drive like any other Linux distribution. Just start Refracta Installer from the menu and follow the instructions. Watch this screenshot.
NOTE: You should create the install partition in advance. Use GParted for that.

LXDE and LightDM
LFS EXTON uses LXDE as Desktop environment. LXDE is designed to be user friendly and slim, while keeping the resource usage low. LFS EXTON has all the tools needed for you to go on and install other Desktop environments or whatever you like (after a hard drive installation of LFS EXTON).

Build your own Linux system
You can also just use LFS EXTON Live DVD/USB as build environment when building your own Linux system from scratch. That can be done in VirtualBox in full screen since VirtualBox Guest Additions are pre-installed.

Install to hard drive
Please read my instructions.

Kernel
LFS EXTON uses my “special” kernel 5.12.8-exton. You can of course compile you own LFS kernel if you want.

Run it fast!

The system is quite fast and responsive. You can run LFS EXTON live super fast from RAM. When the boot process is ready you can eject the DVD or USB stick – screenshot. Use Boot alternative 2 or Advanced options… >> load to RAM. Watch the live boot screen below.

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsLinux

ArchEX (Arch Linux) Live with Deepin 20.2.1, GNOME 40, Gnome Classic, LXQt 0.17, LXDE, kernel 5.12.6-arch1-1, Yay, Spotify and Calamares Installer – Build 210526

NEWS about ArchEX 210526
A new version of ArchEX is ready! In this new version, which I call ArchEX 2021, I have added the Deepin 20.2.1 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 21.5-2. So I thought why not install Deepin also in ArchEX? Furthermore I have added the GNOME 40 (latest) and LXQt 0.17 (latest) Desktop environments. As “extra” Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive!

Study all installed packages in ArchEX 2021 with Deepin/GNOME 40/Gnome Classic/LXQt/LXDE.

Why trust a Chinese Distribution? The Deepin Desktop environment is developed in China and based on Debian.

How To dual boot, triple boot or multi boot Linux with Windows in a simple way and be happy
Before installing ArchEX or any other Linux system my general installation instructions may be of interest.

WHAT IS ArchEX?

ArchEX 64 bit is a new (210526) Linux live DVD based on Arch Linux. Arch motto is KISS (Keep It Simple Stupid). ArchEX uses kernel 5.12.6-arch1-1, Deepin 20.2.1, GNOME 40, GNOME Classic, LXDE and LXQt 0.17.0 Desktop environments. Deepin Desktop (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. About LXQt 0.17.0: LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. GNOME 40 provides a focused working environment that helps you get things done. It is packed with features that will make you more productive.

WHO should run Arch Linux?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
1. ArchEX Deepin Desktop
2. ArchEX GNOME 40 Desktop
3. ArchEX LXQt Desktop
4. ArchEX LXDE Desktop
5. ArchEX Gnome Classic Desktop
6. ArchEX running Spotify
7. ArchEX running in VirtualBox with VirtualBox Guest Additions installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

RaspEX Rpi4 – Build 210109 based on Ubuntu 20.04 LTS – with OpenCPN 5.2.4 (navigation software)

raspex-16.04-opencpn-4.4.0-touchscreen-20160702-smallRaspEX Rpi4 – Build 210109 based on Ubuntu 20.04 Focal Fossa LTS (supported until April, 2025) – with OpenCPN 5.2.4 (latest stable version released 201018) – especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

REPLACEMENT
This build (210109) replaces build 190812. Ubuntu has been upgraded to version 20.04 and OpenCPN to version 5.2.4 – latest stable version. Build 210109 is made especially for the new Raspberry Pi 4, but can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and a Raspberry Pi 2 Model B.

The Desktop environment LXDE is used. The “Lightweight X11 Desktop Environment” is an extremely fast-performing and energy-saving desktop environment. LXDE uses less CPU and less RAM than other environments. It is especially designed for cloud computers with low hardware specifications, such as netbooks, mobile devices (e.g. MIDs) or older computers.

ABOUT RaspEX Build 210109
RaspEX is a Linux ARM system for Raspberry Pi 4, Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Buster (Debian 10), Focal Fossa (Ubuntu 20.04) and Linaro (Open Source software for ARM SoCs). In this new version (210109) I’ve installed OpenCPN 5.2.4.

Read this OpenCPN Review….

SCREENSHOTS
1. RaspEX Build 210109 using Bluetooth
2. RaspEX version 190812 running OpenCPN as the ordinary user raspex
3. RaspEX version 190812 running OpenCPN as root
4. OpenCPN 4.4.0 runningon the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
5. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
6. OpenCPN New York – Approaches to New York (old version of OpenCPN)

7. OpenCPN Stockholm Archipelago (old version of OpenCPN)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

RaspEX Rpi4 based on Ubuntu 20.04 “Focal Fossa” with LXDE, kernel 5.4.83-exton-v7l+, Raspotify, RealVNC, PuTTy, Samba and Bluetooth – Build 210101

NEWS 210101 about RaspEX with LXDE based on Ubuntu 20.04 Focal Fossa.
I have upgraded the whole system and replaced the old kernel 4.19.108-exton-v7l+ with kernel 5.4.83-exton-v7l+. RaspEX Build 210101 is a Linux ARM system for Raspberry Pi 4 with 2GB/4GB/8GB RAM and Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B. It is based on Debian, Ubuntu 20.04 and Linaro (Open Source software for ARM SoCs). Both Firefox and Midori Private Browser are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 210101.

NOTE: Build 201227 is ONLY for Raspberry Pi 4 Model B with 2GB/4GB/8GB RAM. My new RaspEX Build from 210101 is also for Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B.

Kernels
Kernel 5.4.83-exton-v7l+ (for Rpi 4) and 5.4.83-exton-v7+ (for Rpi 3/2) are used in Build 210101.

SCREENSHOTS
Screenshot 1 – raspex’s Desktop 210101
Screenshot 2 – root’s Desktop 210101
Screenshot 3 – running YouTube in Firefox
Screenshot 4 –
RaspEX connected to Windows via Samba

READ MORE….

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

CruxEX 2021 (CRUX 3.6.1) 64bit Linux Build 201223 – Install it to a USB Pen Drive and enjoy PERSISTENCE!

LATEST NEWS ABOUT CruxEX 201223
I have released a new version of CruxEX today. This version has VirtualBox Guest Additions pre-installed, which means (among other things) that you can run CruxEX in VirtualBox in full screen. Read about how to install and run CruxEX from a USB stick in VirtualBox.

Watch a screenshot when CruxEX is running i VirtualBox in full screen. (Using VirtualBox Guest Additions).

CruxEX 2021 64 bit Linux Live USB is based on CRUX 3.6.1 (latest version, released 201212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.6.1 2021 uses the LXDE Desktop environment. I have replaced the original CRUX kernel 5.4 with “my” special kernel 5.9.15-exton, with support for “extra everything”.

Kernel and installed packages
Kernel 5.9.15 is one of the latest available stable kernels as of 201223. Among all installed and updated applications are Firefox, Google Chrome (for Netflix), GParted, PCManFM, Pulseaudio, Slim Login Manager, Gimp and NetworkManager. Furthermore compilation tools so that you can install programs from source. Note: Google Chrome is not in CRUX repositories. Nvidia Graphics Driver 455.45.01 is pre-installed. It will be automatically used if your computer has support for it.

Unique
CruxEX 3.6.1 2021 build 201223 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading. The good thing with CruxEX is that it is a live system (which CRUX original isn’t) and that you can run CruxEX super fast from RAM. Also that you can install CruxEX to hard drive in about 5 min and then have a ready-to-go CRUX desktop system. You can after that install any (extra) desktop environment you like. NOTE: You can (of course) install new Desktops environments and other stuff also when running CruxEX from a USB stick – PERSISTENCE! Note also: To make CRUX original ready for everyday use will normally take 2 – 3 days!

SCREENSHOTS
1. The LXDE Desktop
2. Prt-get in action
3. CruxEX running from USB in VirtualBox
4. The USB live boot screen
5. Netflix running in Google Chrome
6. Wireless connections
7. Running Alsamixer for sound
8. Spotify Web Player is running

Study ALL installed packages…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux Systems