Tag: RaspEX

Raspberry Pi 3 Model B

raspberry-logoNEWS from Raspberrypi.org
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers. I have (of course) bought one and from my experience I must agree.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. I will start with RaspEX.

raspberrypi3-20160304-small

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151029 based on Ubuntu 15.10 – with OpenCPN pre-installed

raspex-opencpn-stockholm-uto-smallRaspEX – Build 151029 based on Ubuntu 15.10 – with OpenCPN

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

ABOUT RaspEX Build 151029
RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151029) I’ve installed OpenCPN 4.1.915 from source.

Read this OpenCPN Review….

Read about how to install and use RaspEX – Build 151027 without OpenCPN. The same instructions are valid for RaspEX Build 151029 with OpenCPN.

SCREENSHOTS

1. OpenCPN World Map
2. OpenCPN Florida – Cape Canaveral
3. OpenCPN New York – Approaches to New York
4. OpenCPN Stockholm archipelago

READ MORE…

 

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151027 based on Ubuntu 15.10 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151027 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151027) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

View all installed packages in RaspEX – Build 151027

View RaspEX new Desktop 151027

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151001 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151001 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (151001) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client).

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Samba and VNC4Server to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer
SSH, Samba and VNC4Server are pre-installed in RaspEX Build 151001. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 2 from Windows the way the below slideshow shows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

Watch this slideshow re. connections between RaspEX and Windows.

READ MORE….

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX (Edition 150706) for Raspberry Pi 2 based on Debian 8, Ubuntu 15.04 and Linaro :: Free download

raspberry-logoNEWS 150706 ABOUT RaspEX
My first version of RaspEX is from 150318. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (150706) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube).

Softpedia review

RaspEX version 150508 was reviewed by Softpedia 150509.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

READ MORE…

No Comments Exton Linux SystemsRaspberry

RaspEX (Edition 150508) for Raspberry Pi 2 based on Debian 8, Ubuntu 15.04 and Linaro :: Free download

raspberry-logoNEWS 150508 ABOUT RaspEX
My first version of RaspEX is from 150318. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs).

Softpedia review
RaspEX version 150318 was reviewed by Softpedia 150404.

What is Raspberry Pi?
The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

model-b-plus-300x225
Raspberry Pi model B made in February 2015. It has a 900MHz quad-core ARM Cortex-A7 CPU and 1GB RAM. Read more…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberry.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion).

View all installed packages in RaspEX

When logged in as root your Desktop will look like this.
raspex-desktop-screenshot-linaro
Click to view a larger picture

READ MORE…

3 Comments Exton Linux SystemsRaspberry

RaspEX for Raspberry Pi 2 based on Debian “Jessie”, Ubuntu “Vivid Vervet” (15.04) and Linaro :: Free download

raspberry-logoNEWS 150403
RaspEX can now be downloaded for free.

News 150318
I have made a perfect (as I think) Linux ARM system for Raspberry Pi 2. I call it RaspEX. It is based on Debian Jessie (upcoming Debian 8), Ubuntu Vivid Vervet (upcoming Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs).

What is Raspberry Pi?
The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

model-b-plus-300x225
Raspberry Pi model B made in February 2015. It has a 900MHz quad-core ARM Cortex-A7 CPU and 1GB RAM. Read more…

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu and Linaro software repositories so you can install thousands of extra packages if you want.

READ MORE…

No Comments Raspberry

RaspEX for Raspberry reviewed by Softpedia 150323

raspberry-logoRaspEX for Raspberry Pi 2 was reviewed by Softpedia today (150323).

My News 150318

I have made a perfect (as I think) Linux ARM system for Raspberry Pi 2. I call it RaspEX. It is based on Debian Jessie (upcoming Debian 8), Ubuntu Vivid Vervet (upcoming Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs).

What is Raspberry Pi?
The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

Softpedia’s review (excerpt)
RaspEX is a commercial operating system for the Raspberry Pi 2 computer board. It is a Linux distribution based on the well known Ubuntu 15.04 (Vivid Vervet) and Debian GNU/Linux 8 (Jessie) operating systems, built around the lightweight LXDE desktop environment and open-source software packages for ARM SoCs from Linaro.

A complete desktop system for the Raspberry Pi 2
RaspEX it’s not a simple distribution with only some basic packages thrown on top of a window manager/desktop environment just for fun, just to prove that Linux works well on Raspberry Pi 2.The fact of the matter is that it’s a complete Linux kernel-based desktop system built around LXDE (Lightweight X11 Desktop Environment), an energy-saving and extremely fast-performing desktop environment with numerous powerful open-source programs pre-installed.

More from Softpedia…

READ MORE about RaspEX….

No Comments Raspberry