NEWS 150706 ABOUT RaspEX
My first version of RaspEX is from 150318. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (150706) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube).
RaspEX version 150508 was reviewed by Softpedia 150509.
Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.
Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)
I have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.1.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.1.1 is the latest stable kernel available from Kernel.org. Released 20150629.
What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)
If you want to install my kernel in your Slackware 64 bit system, do this:
1. Download linux-kernel-4.1.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.1.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.
NOTE: When you run the command installpkg linux-kernel-4.1.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.
Restart your computer and enjoy!
My second version of Exton|Defender is a remaster of Mageia 5, released in June 2015. Mageia has been the third most popular Linux system in the world for some time now (according to Distrowatch.com).
My changes of Mageia 5
I have removed the Gnome Desktop environment and installed Cinnamon instead. Furthermore I have installed the following rescue and repairing tools: NTFS-3g, GParted, PartImage, Sfdisk (util-linux-ng), Rsync, Ddrescue, FSArchiver, TestDisk and Midnight Commander. Other programs (among many others): NetworkManager, Firefox, Gimp, Google Chrome (for Netflix), Emacs, Safecopy, kernel headers and many compilation tools. Study the full list of installed packages. The system language is ENGLISH.
Who is Exton|Defender mga 32 bit Cinnamon for?
Exton|Defender mga aims to provide an easy way to carry out admin tasks on your computer, such as creating and editing the hard disk partitions. There is also no official live Mageia 5 ISO with Cinnamon for downloading. (Only with KDE and Gnome). Exton|Defender can also be useful for people with older 32 bit computers who like to run an eminent Linux system (Mageia) live with some speed.
See this screenshot of the Cinnamon 2.4.5 Desktop in Exton|Defender mga
One member on andex.exton.net wrote this today about my KitKat 4.4.4 build 6 of 150606.
I’ve been testing the 4.4.4 Kitkat version 6 on my Asus Vivobook with Intel HD Graphics and touchscreen. The touchscreen works perfectly and supports multitouch. Finally a build that works great with with games. I played Clash of Clans with no hassle. I ran most of the graphics benchmark apps available.
I had a persistent “Unfortunately, your app has stopped” error problem with Dominations. Another Clash of Clans type popular RTS game with civilizations/age of empires/rise of nations looking graphics. This game is relatively new and has lots of nasty bugs and performance issues. I got the same issues on any device, including native ARM devices. So it’s not related to the build. I managed to fix the crashing bug after wiping the data with Titanium Backup. Wiping the data and cache with the standard app manager couldn’t solve it. I don’t know why. I should add that after the fix, I had a very stable game experience and way much less random crashes than my tablet and my phone.
It’s the best Android x86 version I’ve tested so far. You need to be a little patient at the beginning and update “Google Play Services” asap. It’s pretty stable and satisfying. It’s one tick away from being perfect, if mx player with the x86 codec pluging had worked. But that doesn’t work with the Android-x86.org version either. [REQUEST] It would be great to have that working as it is one of the most popular media players. I tried several other well known media players but no luck, except VLC for Android, which is still in development and has artifacts while playing videos.
Everything else works like a charm. This is my best experience with Android-x86 so far. I extremely recommend it especially if you want to play your Android games on your PC.
A new version of SlackEX is out today (150612). I have now included Nvidia’s Graphic driver 346.72 and Google Chrome (for watching Netflix movies).
Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. Gammal är äldst (The older the fiddle the sweeter the tune) as we say in Sweden.
NEWS 150611 – AndEX – Lollipop 5.1.1 with kernel 4.0.3 and GAPPS
My new build of Android-x86 Lollipop 5.1.1 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. For example: Facebook, OfficeSuite 8 and Pool Break Lite (3D game). The ISO is called android-x86-5.1.1-lollipop-kernel-4.0.3-exton-GAPPS-556mb-150611.iso. AndEX 150611 is totally error-free. (This Lollipop version was released April 27, 2015). When running AndEX live you will get some error messages during the setup of your wireless connection and logging into your Google account, but nothing serious. For installing new apps you shall always use Google Play Store in AndEX build 150611. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.
My compiled Android–x86 system (Lollipop 5.1.1) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.
More about AndEX
Lollipop 5.1.1 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 4.0.3-exton-android-x86 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2015-06-06 will also cost you 9 $. I has two advantages over the Lollipop version: You can run the system in VirtualBox and the system can be used also on older laptops. Read more about the KitKat 4.4.4 version 150606 or DOWNLOAD it instantly.
Installing 3D games
I wrote an article 150608 about installing 3D games in my KitKat 4.4.4 Build 6. The same games can be installed in AndEX Build 150611. I have also tested Cars: Fast as Lightning and Trials Frontier in AndEX. Those apps ran without problems.
What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150611 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.
You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 build 150606 will run also on older computers.
Screenshot 1 – AndEX Desktop with Rain Live wallpaper (pre-installed)
Screenshot 2 – AndEX showing all apps
Screenshot 3 – AndEX running Pool Break Lite in 3D
Screenshot 4 – AndEX running Cars: Fast as Lightning
Screenshot 5 – AndEX running Trials Frontier
Installing Game apps on Android-x86 KitKat 4.4.4 build 6 with GAPPS, kernel 4.0.0-exton-android-x86 and Mesa 10.5.4
A member on andex.exton.net said this yesterday: KitKat Build 6 has indeed great 3d performance, I tested some games and all run VERY fast:
Clash Of Clans
Grand Theft Auto 3
To verify that I did test installations today of some games: Clash Of Clans, Max Payne, Grand Street Auto 5, Juventus Fantasy Manager 2015, Shoot The Chicken Pro, Candy Crush and Angry Birds. See this slideshow.
All those games ran without problems. Many more can be installed of course. Maybe this is interesting for all game enthusiasts…
Android-x86 KitKat 4.4.4 Exton build 150606, version 6, is a total rebuild.
I’ve added Mesa 10.5.4 for better Graphic performance. The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store is pre-installed so you can just make your choices…
This version (version 6) replaces all my previous (5) Android-x86 4.4.4 KitKat builds. In version 6 I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Google Chrome, Maps, YouTube and more apps (for example OfficeSuite). Everything just works. It can happen that you get some error messages, but don’t worry. Just close the “error windows”. The installed apps will work.
If you install Andriod-x86 to hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.
What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.
The Galactic Core Live Desktop pic 1
The “Live fish” Desktop pic 2
The “Live tiger” Desktop pic 3
The “Live fish in the sea” Desktop pic 4
The “Live aquarium” Desktop pic 5
My problems with PayPal were solved today. You are now free to download AndEX (Android Lollipop 5.0.2), my Android-x86 KitKat version 5 and RaspAnd (Android Lollipop 5.1 on Raspberry Pi 2).
NEWS 150531 re. Exton|Defender fc22 (Fedora 22)
I’ve made a new version of Exton|Defender 64 bit. Now based on Fedora 22, released 150526. It uses Cinnamon 2.4.8 and kernel 4.0.4.
As far as I know there is no other live Fedora 22 cd/dvd out there with the Cinnamon Desktop.
System Tools included
NTFS-3g, GParted, PartImage, Sfdisk (util-linux-ng 2.21.2), Rsync, Ddrescue, FSArchiver, TestDisk and Midnight Commander. Other programs (among many others): Google Chrome (for watching Netflix movies), LibreOffice, NetworkManager, Firefox, Thunderbird, Gimp, Samba, Java (JDK 7u9) and Java Runtime Environment (JRE), Emacs, Safecopy, kernel headers and many compilation tools. See a complete LIST of all installed packages 150531.