Tag: exton

RaspEX OSMC Rpi3 with LXDE Desktop and Kodi 18 Media Center “Leia” with Netflix, Plex and Amazon Video addons – Build 181223

ABOUT RaspEX OSMC
RaspEX OSMC Build 181223 is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and a Raspberry Pi 2 Model B. OSMC is based on Debian and Kodi Media Center. In RaspEX OSMC I’ve added the LXDE Desktop with many useful applications such as Wicd and NetworkManager. Makes it easy to configure your wireless network. I’ve also upgraded OSMC to a BETA version (Kodi 18 Leia), which makes it possible to include useful addons such as Netflix, Plex and Amazon Video. Which I’ve done. Study all included packages in RaspEX OSMC.

About OSMC (short for Open Source Media Center) and the difference between RaspEX OSMC and OSMC original
OSMC is based on Debian and Kodi Media Center. It is an embedded, minimal, self updating Linux distributing which ships a Kodi front-end for a variety of devices. The project was founded by Sam Nazarko in 2014 and is maintained by a group of volunteers in their spare time. OSMC can be downloaded for free for all supported platforms on their official Download page. So OSMC has no real Linux Desktop. After the boot process and some configurations are ready you will end up directly in Kodi. Running RaspEX OSMC you will immediately end up at LightDM‘s login page – see below how it will look. From there you can log in to the LXDE Desktop as the ordinary user osmc or as root. Passwords: osmc/root. As user osmc you can alternatively log in directly to Kodi 18. After the first boot you should, however, chose to log in to the LXDE Desktop and use Wicd and/or NetworkManager for configuring your network connection. The big difference between OSMC and RaspEX OSMC is that Kodi 18 Leia is pre-installed in RaspEX OSMC together with some really useful addons (Netflix, Plex and Amazon Video). Those addons need Widevine to run. While you are logged in to the LXDE Desktop you can use Synaptic Package Manager to install all extra packages you may need. Since OSMC/RaspEX OSMC is based on Debian you’ll have about 30000 packages to chose between.

RaspEX OSMC performance
RaspEX OSMC is a very fast and responsive Rpi system. Much due to very low memory (RAM) usage. About 100 MB as this screenshot shows. I’ve said that RaspEX LXDE Build 181015 is very fast. RaspEX OSMC is even faster especially if you use the new Raspberry Pi 3 Model B+ to run it. The video and sound quality is also very very good. Even while running RaspEX OSMC on big TV screens. I.e. you can really enjoy Netflix and YouTube running on your Rpi mini computer!

SCREENSHOTS
1. Running Kodi – animated gif
2. The LXDE Desktop logged in as osmc
3. The LXDE Desktop logged in as root
4. Wicd running before entering Kodi
5. Netflix running showing very good video quality – 1
6. Netflix running showing very good video quality – 2
7. YouTube running showing very good video quality
8. Choosing video addons in Kodi

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

ChromX (Chromium OS) – Exton Build 181218 – with YouTube working fast and responsive

About ChromX
I have compiled Chromium OS from source for the third time. Chromium OS is an open-source project that aims to build an operating system that provides a fast, simple, and more secure computing experience for people who spend most of their time on the web. My Chromium OS Build 181218 is for all 64 bit “normal” Desktop computers and laptops. If you have unusual hardware you could check out ArnoldTheBat’s special Chromium OS builds.

How do I run Chromium OS?
Normally you run Chromium OS from a USB stick, but the system can also be installed to hard drive. Could be useful if you want to bring new life to an old computer. Be aware of the fact that Chromium OS can’t be installed together with other Linux systems (or any other OS). It will “take” the whole disk.

The difference between Chromium OS and Google Chrome OS
Chromium OS is the open source project, used primarily by developers, with code that is available for anyone to checkout, modify, and build. Google Chrome OS is the Google product that OEMs ship on Chromebooks for general consumer use.

SCREENSHOTS
The new Desktop – first screen
ChromX running YouTube
Adding new languages
Accessibility possibilities

READ MORE…

No Comments Chromium OSextonExton Linux SystemsLinux

ExTiX 19.0 with Deepin 15.5 Desktop, Refracta snapshot, Calamares 3.2.2 Installer, Kodi 18.0 and kernel 4.20.0-rc4-exton – Build 181208

NEWS 181208 ABOUT ExTiX Deepin 19.0
I’ve released a new version of ExTiX Deepin today with Calamares 3.2.2 and kernel 4.20.0-rc4-exton. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. All packages have been updated to the latest available version as of today. Study all installed packages in ExTiX Deepin Build 181208. ExTiX is based on Debian and Ubuntu 18.10.

About ExTiX 19.0 with the Deepin 15.5 Desktop
I’ve made a new extra version of ExTiX with Deepin 15.5 Desktop (made in China!). Deepin is devoted to providing a beautiful, easy to use, safe and reliable system for global users. Only a minimum of packages are installed in ExTiX Deepin. You can of course install all packages you want. Even while running ExTiX Deepin live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Deepin. Note that also Kodi 18 RC2 Leia is pre-installed with some video add-ons. Kodi (formerly XBMC) is a free and open-sourcemedia player software application developed by the XBMC Foundation. It allows users to play and view most streaming media, such as videos, music, podcasts, and videos from the Internet, as well as all common digital media files from local and network storage mediacite from Wikipedia.

ABOUT ExTiX
All five ExTiX systems are based on Ubuntu and Debian.

The Ultimate Linux System
I’ve called my different versions of ExTiX The Ultimate Linux System for many years by now. As regards ExTiX 19.0 Deepin I feel it’s especially justified. Everything just works.

Refracta Tools
While running ExTiX Deepin 19.0 live or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

Used KERNEL

My special kernel 4.20.0-rc4-exton corresponding Kernel.org’s kernel 4.20-rc4.

What’s new in Linux kernel 4.20?

Why two versions of ExTiX Deepin?

The thing is that the packages grub-pc and grub-efi-amd64 can’t be installed at the same time. To be able to use Calamares Installer on non-efi computers grub-pc has to be installed. ExTiX Deepin 18.8 Build 180815 is for non UEFI-enabled computers.

SCREENSHOTS
1. ExTiX Deepin 15.5 Desktop
2. ExTiX Deepin being installed in VirtualBox using Refracta Installer
3. ExTiX Deepin (NON-UEFI) Build 180815 being installed in VirtualBox using Calamares Installer
4. ExTiX Deepin running Refracta snapshot
5. ExTiX Deepin running in VMware
6. ExTiX Deepin running the Refracta Installer
6. ExTiX Deepin login screen (LightDM)
8. Movie showing how to enable Window effects
9. A small movie made with Deepin Screen Recorder
10. Kodi 18.0 running in ExTiX 19.0
11. ExTiX boot screen when running live
12. ExTiX boot screen when running from hard drive

Deepin Screen Recorder
In ExTiX Deepin you can record everything you do. Watch this small video. Or a video when I’ve started Calamares Installer.

READ MORE…

No Comments extonExton Linux SystemsLinux

FedEX Rpi3 (Fedora 29) for Raspberry Pi 3 Model B and Model B+ :: Build 181206

NEWS 181206: FedEX Rpi3 for Raspberry Pi 3 Model B and Model B+ is a “remaster” of the Fedora Project’s Fedora 29 build for ARM

The Raspberry Pi is a credit card-sized ARM based single board computer (SBC). Fedora supports the the Raspberry Pi Model B versions 2 and 3 in all current Fedora releases, the 3+ is supported in Fedora 29 without any requirement of third party kernels or scripts to adjust official images.

FAQ
The documentation on Fedora Project ARM includes a Frequently Asked Questions (FAQ) about what is supported and what isn’t.

Why a remaster of the original Fedora 29 image?
The original Fedora 29 system uses the Gnome desktop. Since the Raspberry Pi 3 computer only has 1GB RAM Gnome is way to “heavy” to run smoothly. I have therefore in my remaster FedEX removed most of the Gnome applications and replaced the Gnome desktop environment with LXDE. LXDE, which stands for Lightweight X11 Desktop Environment, is a desktop environment which is lightweight and fast. It is designed to be user friendly and slim, while keeping the resource usage low. LXDE uses less RAM and less CPU while being a feature rich desktop environment. Furthermore I have “blacklisted” newer kernels than the one installed now, which is 4.18.16-300-fc29. Using newer Fedora kernels you won’t have a Wifi connection no matter what you do.

Study all installed packages in FedEX…

FedEX PERFORMANCE
Despite using LXDE the FedEX system is not very fast. When running YouTube in Firefox you’ll even have to be a bit patient. For some unknown reason the system performs slightly better when logged in as root. The original Fedora 29 Rpi 3 system has the same problem. If you want to run a real fast system on your Rpi 3 Model B+ computer you should go for RaspEX with BunsenLabs Build 181010 or RaspEX with LXDE Build 181022. A member on raspex.exton.se wrote this “review” the other day: In three days I´ve tried out different Linux distros on a laptop and on my rpi3b, “pure Ubuntu”, Kali, RaspArch, Arch and yours. Finally it feels right on my Rpi with RaspEX, easy to install and with only “2 problems” you get 9/10 (rootfs.sh and no_pubkey). After spending like 14 hours yesterday trying to install Arch on a HP-laptop, with both manual tutorial and some git-hub-pro-script, failing Big Time, this was a relief. Took me like 15min. Kali + HP = nice. RPI + RaspEX = love!

WHO SHOULD RUN FedEX Rpi3/Fedora 29 for Raspberry Pi 3?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Compatibility :: December 2018
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, EXTON OpSuS Rpi, FedEX Rpi3 and RaspArch. I have until now (181126) upgraded RaspEX, RaspEX with OpenCPN, RaspArch, EXTON OpSuS Rpi, FedEX Rpi3 and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

SCREENSHOTS
FedEX’s LXDE Desktop
DNF running
Firefox and Conky running

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

EXTON OpSuS Rpi (openSUSE Tumbleweed) for Raspberry Pi 3 Model B+ with XFCE and kernel 4.19.1-1 – Build 181126

News 181126 about EXTON OpSuS Rpi
I’ve made a “remaster” of openSUSE’s Tumbleweed image for Raspberry Pi 3 with the XFCE Desktop and many other more or less necessary packages. Study the full package list.

The Raspberry Pi 3 is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video.

Why a remaster of the original openSUSE image?
I did it mostly because it’s fun. My version has one big advantage though since you can enjoy sound. Good if you like YouTube for example. I’ve also added some “necessary” packages and prevented installations of all KDE packages. Watch this screenshot. KDE is way to heavy to run on the Rpi computer.

EXTON OpSuS Rpi Tumbleweed’s performance

The system is not very fast. When running YouTube in Firefox you’ll even have to be a bit patient. Especially if you don’t create a SWAP partition as I’ve described on the INFO site. With a SWAP partition the system will function better. It will still not be fast, but faster. For some unknown reason the system performs slightly better when logged in as root. The original openSUSE Rpi system has the same problem. If you want to run a real fast system on your Rpi 3 Model B+ computer you should go for RaspEX with BunsenLabs Build 181010 or RaspEX with LXDE Build 181022. A member on raspex.exton.se wrote this “review” the other day: In three days I´ve tried out different Linux distros on a laptop and on my rpi3b, “pure Ubuntu”, Kali, RaspArch, Arch and yours. Finally it feels right on my Rpi with RaspEX, easy to install and with only “2 problems” you get 9/10 (rootfs.sh and no_pubkey). After spending like 14 hours yesterday trying to install Arch on a HP-laptop, with both manual tutorial and some git-hub-pro-script, failing Big Time, this was a relief. Took me like 15min. Kali + HP = nice. RPI + RaspEX = love!

About openSUSE Tumbleweed

The Tumbleweed distribution is a pure rolling release version of openSUSE containing the latest stable versions of all software instead of relying on rigid periodic release cycles. The project does this for users that want the newest stable software.

WHO should run EXTON OpSuS Rpi/openSUSE?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Compatibility :: November 2018

Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, EXTON OpSuS Rpi and RaspArch. I have until now (181126) upgraded RaspEX, RaspEX with OpenCPN, RaspArch, EXTON OpSuS Rpi and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

SCREENSHOTS
The XFCE Desktop when logged in as the ordinary user live
The XFCE Desktop when logged in as root (superadmin)

READ MORE…

1 Comment extonExton Linux SystemsLinuxRaspberry Pi

RaspEX especially for Raspberry Pi 3 Model B+ – based on Ubuntu 18.04 LTS – with OpenCPN 4.8.8 pre-installed ::: Build 181120

raspex-16.04-opencpn-4.4.0-touchscreen-20160702-smallRaspEX – Build 181120 based on Ubuntu 18.04 LTS – with OpenCPN 4.8.8 (latest stable version released 181107) – especially made for the new Raspberry Pi 3 Model B+, but it can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

Replacement
This build (181120) replaces build 180331. Ubuntu has been upgraded to version 18.04 LTS and OpenCPN to version 4.8.8 – latest stable version released 181107. RaspEX Build 181120 is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

ABOUT RaspEX Build 181120
RaspEX is a Linux ARM system for Raspberry Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Stretch (Debian 9), Bionic Beaver (Ubuntu 18.04 LTS) and Linaro (Open Source software for ARM SoCs). In this new version (181120) I’ve installed OpenCPN 4.8.8 from source.

Read this OpenCPN Review….

Kernel
Kernel 4.14.80-v7 is used.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer

SSH, Samba and VNC4Server are pre-installed in RaspEX Build 181120. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 3/2 from Windows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

The 7″ Touchscreen Monitor for Raspberry Pi
To my great joy also this version of RaspEX work together with the 7″ Touchscreen Monitor for Raspberry Pi “out of the box”.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Stretch) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. RaspEX Build 181022, 181010 (with BunsenLabs Desktop) and 181120 (current with OpenCPN) are of course even faster, especially if you run the systems on a Raspberry Pi 3 Model B+ computer.

SCREENSHOTS
1. RaspEX version 181120 running OpenCPN as the ordinary user raspex
2. RaspEX version 181120 running OpenCPN as root
3. OpenCPN 4.4.0 running on the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
4. OpenCPN 4.4.0 – Boston (old version OpenCPN)
5. OpenCPN World Map (old version of OpenCPN)
6. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
7. OpenCPN New York – Approaches to New York (old version of OpenCPN)
8. OpenCPN Stockholm Archipelago (old version of OpenCPN)

READ MORE….

Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonExton Linux SystemsLinuxRaspberry Pi

RaspArch Build 181117 :: Run Arch Linux on your new Raspberry Pi 3 Model B+ computer :: Install using Win32 Disk Imager or Etcher in Windows!

This version (181117) is my seventh build of RaspArch
The first version is from 150414. The second is from 151107. The third is from 160312 specially made for Raspberry Pi 3 Model B. The fourth version is from 161205. The fifth version is from 171102. The sixth version is from 180402. This version (181117) is especially made for the new Raspberry Pi 3 Model B+, but it can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

Most important change in version 181117: Use Win32 Disk Imager
This version can be installed in Windows using Win32 Disk Imager or Etcher. Previous versions could only be installed when running a Linux system. Using Win32 Disk Imager has one disadvantage though. Only about 1GB can be used as data storage no matter which card you use. The system is of 3GB and the system partition of 4GB. If you use a card of 32GB about 28GB will be unused. Yesterday a member on this site wrote about how to get rid of the 1GB limit after Win32 Disk Imager or Etcher has been used:
– write the image with Win32 Disk Imager
– start up Ubuntu or another Linux system – you can also use a Linux Live CD/USB stick
– start GParted – screenshot before resizing
screenshot during resizing
– resize the DATA partition – screenshot after resizing
– done!
This screenshot shows that RaspArch now has about 25GB free storage.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of Arch Linux/RaspArch

“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support AUR (I like Yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the Pi 2.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop
– YouTube running
Screenshot 2 of RaspArch’s Desktop – Wicd running
Screenshot 3 – Yaourt running (while installing Geany)
Screenshot 4 of RaspArch’s Desktop – logged in as root

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

ArchEX (Arch Linux) with Deepin 15.8, LXQt 0.13, kernel 4.18.16-1-ARCH, Firefox 63.0.1, Yaourt and Calamares 3.2.2 installer – Build 181114

NEWS about ArchEX 181114
A new version of ArchEX is ready! In this new version, which I call ArchEX 2019, I have added the Deepin 15.8 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 18.8. So I thought why not install Deepin also in ArchEX?

Study all installed packages in ArchEX 2019 Deepin/LXQt.

Why trust a Chinese Distribution?

NEWS 181114 about Calamares Installer
I’ve finally managed to make Calamares 3.2.2 (The universal installer framework) work without problems/issues. Calamares 3.2.2 is quite new. Released September 4, 2018. This version gives you more control over the installation process. Now you can use Calamares to install ArchEX in any language. The boot loader Grub2 (which can be installed during the installation of ArchEX) will also work without problems.

WHAT IS ArchEX?

ArchEX 64 bit is a new (181114) Linux live DVD based on Arch Linux. Arch motto is KISS (Keep It Simple Stupid). ArchEX uses kernel 4.18.16-1-ARCH, Deepin 15.8 and LXQt 0.13 Desktop environments. Deepin 15.8 Desktop (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. About LXQt: LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel.

WHO should run Arch Linux?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
ArchEX Deepin Desktop
ArchEX Deepin full Desktop
ArchEX running Calamares – Welcome screen
ArchEX LXQt Desktop
ArchEX starting up live
ArchEX starting up from hard drive (VirtualBox)
ArchEX installing Google Chrome with Yaourt
ArchEX Installer (Calamares) running – all done
When Cinnamon is installed (pacman -S cinnamon)
When Xfce4 is installed (pacman -S xfce4)
When KDE (Plasma) is installed (pacman -S plasma-meta and pacman -S kde-applications-meta)
When Enlightenment is installed (pacman -S enlightenment

READ MORE…

No Comments extonExton Linux SystemsLinux

Exton|OS 64 bit – based on Ubuntu 18.04.1 LTS – with Budgie Desktop, Refracta Snapshot, Calamares Installer and kernel 4.20.0-rc1-exton – Build 181109

NEWS 181109 ABOUT Exton|OS with Budgie Desktop 10.4 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.4. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in Build 181109: Refracta Snapshot, Calamares 3.1.12, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 4.20.0-rc1-exton (corresponding Kernel.org‘s latest kernel 4.20-rc1) is used. All packages have been updated to the latest available version as at November 9, 2018. Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 181109
This Exton|OS version is for non-efi computers, which means that you can use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.

WHAT’S NEW in kernel 4.20?

IMPORTANT ABOUT REFRACTA Snapshot
Refracta Snapshot is pre-installed in Exton|OS Build 181109. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 15 – 40 min! You’ll find the ISO in /home/snapshots. (Or change that in /etc/refractasnapshot.conf). The whole thing is very simple.

SCREENSHOTS
Screenshot 1
– Exton|OS’s Budgie live Desktop
Screenshot 2 – Exton|OS’s Budgie root Desktop
Screenshot 3 – Exton|OS’s Budgie Desktop installing Spotify
Screenshot 4 – Exton|OS’s Budgie Desktop running Refracta Snapshot
Screenshot 5 – Exton|OS running in VMware
Screenshot 6 – showing how to add apps to Docky

READ MORE…

No Comments extonExton Linux SystemsLinux

DebEX Gnome 64 bit – non-efi – with Gnome 3.30 (latest), Refracta snapshot, Calamares and kernel 4.19.0-exton – Build 181030

About DebEX
All three systems/distributions are a based on
Debian Buster/Sid (upcoming Debian 10). Budgie Desktop 10.4 is used as Desktop environment in DebEX Barebone/Budgie. Gnome 3.30 is used in DebEX Gnome. KDE Plasma Desktop 5:47 is used in DebEX KDE. The system language is English (in all three versions of DebEX).

NEWS 181030 about DebEX Gnome a Refracta non-efi Build
I have made a new extra version of DebEX, which I call DebEX Gnome Live DVD. It’s a pure Debian system using the testing (buster) and unstable (sid) repositories. Gnome 3.30 (latest) is used as Desktop environment. Gnome in combination with Docky is perfect (I think). Watch this screenshot. I have removed the Mate Desktop, since Gnome now can be used on all kind of computers. Also when running DebEX in VirtualBox and VMware. No need for Nvidia’s proprietary graphics drivers when running this new version of DebEX. You can of course install such drivers if you want to. Furthermore I have replaced Google Chrome with Iceweasel 52.6. It is now possible to watch Netflix movies using Iceweasel (Firefox) in Linux. I have also replaced Refracta Installer with Calamares Installer, which makes it possible to install DebEX Gnome in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. All installed packages have been updated to the latest version as of 181030. DebEX Gnome uses kernel 4.19.0-exton corresponding Kernel.org’s latest kernel 4.19. You can download “my” kernel if you want to use it in another Debian or Ubuntu system.

The LightDM login window in DebEX Gnome

MOVIE about Calamares Installer
Watch a movie
about the Calamares installation process in VirtualBox.

What’s new in kernel 4.19?

SCREENSHOTS
1. Samba running
2. Calamares has started in VirtualBox
3. Calamares has finished
4. Showing all installed applications
5. Synaptic running

READ MORE…

No Comments extonExton Linux SystemsLinux