Category: Raspberry

RaspEX Build 160402: Now with Kodi (XBMC) Media Center, Bluetooth, Samba, SSH and VNC4Server

raspberry-logoNEWS 160402
I discovered to my horror that Build 160331 of RaspEX didn’t have support for YouTube in Kodi. Many Add-ons (extensions) in Kodi are dependent on the YouTube Add-on. I therefore (of course) had to correct this error and upload a new version (160402) of RaspEX. While I was at it I took the opportunity to install some additional popular Music, Video and Picture Add-ons.

NEWS 160331: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
I have upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

NEWS 160402 ABOUT RaspEX
My previous version of RaspEX is from 160307. I have now upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop. RaspEX Build 160331 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160402) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

How do I run Kodi?
You can just start Kodi from the menu while in the LXDE Desktop environment as the ordinary user raspex or as root. Then you can just start adding video and music Add-ons. I suggest that you also add a “Superrepo” – http://srp.nu. Please note that I have already installed some popular Add-ons in Build 160402.

View all installed packages in RaspEX – Build 160402

Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

Screenshots showing additional popular Music, Video and Picture Add-ons in Kodi Media Center.

READ MORE…

2 Comments Exton Linux SystemsLinuxRaspberry

RaspAnd – Build 3 150924/160315 – with Google Play Store, now also for Raspberry Pi 3!

raspex-andex-logoNEWS about RaspAnd 160315
I have uploaded a new version of RaspAnd, which can run also on the new Raspberry Pi 3 computer. It is basically the same system as before. Only the boot parameters are changed.

About RaspAnd 150924
I have finally managed to include Google Play Store in RaspAnd and most important Google Play Services.

NEWS 150924
I have compiled yet another Android 5.1 Lollipop system which can run on Raspberry Pi 2. I call “my” new system RaspAnd Build 3. My first version of RaspAnd is from 150405 and my second from 150527. The following useful apps are pre-installed in Build 3 of 150924: Google Play Store, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, AIDA64, Geekbench, WinZip, FileManager, Rotation Control Lite, WPS Office and Offline Maps. Google Play Store, AIDA64 and Geekbench were not included in Build 2 from 150527.

SCREENSHOTS
Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – Google Play Services updating

Screenshot 4 – Google Play Store update with Aptoide

READ MORE…

1 Comment AndroidExton Linux SystemsLinuxRaspberry

RaspArch Build 160312 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2

rasparch-logoThis version (160312) is my third build of RaspArch
The first version is from 150414. The second is from 151107. This version (160312) is especially made for the new Raspberry Pi 3. Version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 558 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B  or Pi 2 computer.

UPGRADE RaspArch
If you have downloaded and installed my previous version of RaspArch from 151107 you can still use the Micro SD Card with RaspArch on the new Raspberry Pi 3 after a full upgrade of the system. Commands: pacman -Sy followed by pacman -Syu. Most important the old kernel will automatically be replaced by kernel 4.1.19-4-ARCH.

What is Raspberry Pi?

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

WHO should run Arch Linux/RaspArch?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

rasparch-screenshot-desktop-small

BENEFITS of Arch Linux/RaspArch
“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

RaspEX – Build 160308 – with OpenCPN pre-installed, now especially for Raspberry Pi 3

raspex-opencpn-stockholm-uto-smallRaspEX – Build 160308 based on Ubuntu 15.10 – with OpenCPN – especially made for Raspberry Pi 3

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

REPLACEMENT
This build (160803) replaces build 151029 which can run only on Raspberry Pi 2 computers. Build 160803 is made especially for Raspberry Pi 3, but can also be used on Raspberry Pi 2.

ABOUT RaspEX Build 160308
RaspEX is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160308) I’ve installed OpenCPN 4.1.915 from source.

Read this OpenCPN Review….

Screenshots
1. OpenCPN World Map
2. OpenCPN Florida – Cape Canaveral
3. OpenCPN New York – Approaches to New York
4. OpenCPN Stockholm archipelago

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 160307 – for the new Raspberry Pi 3

raspberry-logoNEWS 160307: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. RaspEX Build 160307 with a new kernel runs very well on Raspberry Pi 3. You can (of course) also run the new RaspEX system on a “old” Raspberry Pi 2.

NEWS 160307 ABOUT RaspEX

My first version of RaspEX is from 150318, my second from 150706 and my third one from 151027. I have now upgraded the whole system and replaced the old kernel. RaspEX Build 160307 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160307) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Softpedia review
RaspEX version 151001 was reviewed by Softpedia 151001.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry on “steroids“. RaspEX Build 160307 is (of course) even faster, especially if you run the system on a Raspberry Pi 3 computer.

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

Raspberry Pi 3 Model B

raspberry-logoNEWS from Raspberrypi.org
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers. I have (of course) bought one and from my experience I must agree.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. I will start with RaspEX.

raspberrypi3-20160304-small

No Comments Exton Linux SystemsLinuxRaspberry

RaspArch Build 151107 :: Run Arch Linux on your Raspberry Pi 2

rasparch-logoThis version (151107) is my second build of RaspArch
The first version is from 150414. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 492 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 2 computer.

NEWS 151107
A new version of RaspArch is ready. The compressed file rasparch-exton.tar.gz from 151105 was compressed with Archive Manager in Ubuntu 15.10. Something is wrong with this program. I had to compress the folder manually. I.e. using the command tar -zcvf rasparch-exton.tar.gz rasparch-exton. The compressed folder has decreased in size from 851 MB (151105) to 492 MB(!?).

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 4.1.12-1-ARCH and the LXDE Desktop environment.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

rasparch-desktop-151105-small

BENEFITS of Arch Linux/RaspArch
“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151029 based on Ubuntu 15.10 – with OpenCPN pre-installed

raspex-opencpn-stockholm-uto-smallRaspEX – Build 151029 based on Ubuntu 15.10 – with OpenCPN

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

ABOUT RaspEX Build 151029
RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151029) I’ve installed OpenCPN 4.1.915 from source.

Read this OpenCPN Review….

Read about how to install and use RaspEX – Build 151027 without OpenCPN. The same instructions are valid for RaspEX Build 151029 with OpenCPN.

SCREENSHOTS

1. OpenCPN World Map
2. OpenCPN Florida – Cape Canaveral
3. OpenCPN New York – Approaches to New York
4. OpenCPN Stockholm archipelago

READ MORE…

 

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151027 based on Ubuntu 15.10 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151027 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151027) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

View all installed packages in RaspEX – Build 151027

View RaspEX new Desktop 151027

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151001 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151001 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (151001) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client).

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Samba and VNC4Server to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer
SSH, Samba and VNC4Server are pre-installed in RaspEX Build 151001. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 2 from Windows the way the below slideshow shows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

Watch this slideshow re. connections between RaspEX and Windows.

READ MORE….

No Comments Exton Linux SystemsLinuxRaspberry