Tag: Linux

ExLight 64 bit Linux Live DVD with Enlightenment 0.20.99.0 and kernel 4.6.2-exlight

exlight-change-to-animated-wallpaper-smallWHAT’S NEW IN VERSION 160612?
1. ExLight is now based on Ubuntu 16.04 (alias Xenial Xerus) and Debian 8.5 Jessie.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.2.0-16-exton with kernel 4.6.2-exlight.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 3 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (live installer) is now working as intended in ExLight version 160612. I.e. a new user (your user) will be created during the installation process.
7. I have pre-installed Nvidia proprietary Graphics driver 361.45.11.
8. I have added three animated wallpapers.

What’s new in kernel 4.6?

Installed packages
The Desktop Environment is Enlightenment 0.20.99.0 (Beauty at your fingertips). Kernel 4.6.2-exlight is used. (Kernel.org‘s latest stable kernel 4.6.2). Program content: Libre Office, Synaptic, GParted, Wicd, PCManFM, Google Chrome (for watching Netflix movies) and Gimp. Furthermore compilation tools so that you can install programs from source. I have also included Nvidia Graphics driver 361.45.11. It has support for the following GPUs (among others): GeForce 900, GeForce 800A, GeForce 800M, GeForce 700, Quadro Series, GeForce GTX 970M and GeForce GTX 980M. Study the full ExLight program LIST. All programs have been updated to the latest available version as at June 12, 2016.

Screenshots
See three screenshots of the Enlightenment 0.20.99.0 Desktop – pic 1pic 2pic 3 (animated wallpaper)

READ MORE…

8 Comments extonExton Linux SystemsLinux

RaspEX – Build 160307 – for the new Raspberry Pi 3

raspberry-logoNEWS 160307: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. RaspEX Build 160307 with a new kernel runs very well on Raspberry Pi 3. You can (of course) also run the new RaspEX system on a “old” Raspberry Pi 2.

NEWS 160307 ABOUT RaspEX

My first version of RaspEX is from 150318, my second from 150706 and my third one from 151027. I have now upgraded the whole system and replaced the old kernel. RaspEX Build 160307 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160307) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Softpedia review
RaspEX version 151001 was reviewed by Softpedia 151001.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry on “steroids“. RaspEX Build 160307 is (of course) even faster, especially if you run the system on a Raspberry Pi 3 computer.

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

ExTiX 16.1 – Build 160120 – with LXQt 0.10.0 and kernel 4.4.0-0-exton

extix-logo-black-white-bgI have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 16.1 LXQt Live DVD. (The previous version was 15.4).

ABOUT
ExTiX 16.1 LXQt DVD 64 bit is based on Debian 8.2 Jessie/Debian 9 Stretch and Ubuntu 15.10. The original system includes the Desktop Environment Unity (Ubuntu). After removing Unity I have installed LXQt 0.10.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.4.0-0-exton corresponding Kernel.org’s kernel 4.4. It’s the latest stable kernel as of now.

What’s new in kernel 4.4?

NEWS ABOUT ExTiX 16.1 build 160120 with LXQt Desktop environment
1. ExTiX LXQt is based on Ubuntu 15.10 Wily Werewolf. LXQt 0.10.0 (not in Ubuntu’s repositories) is used as Desktop environment. All packages have been updated to the latest version by 160120. Kernel 4.4.0-0-exton is used. (Kernel.org‘s kernel 4.4). Ubuntu 15.10 uses kernel 4.2.
2. Google Chrome is used as Web Browser, which makes it possible to watch Netflix movies. It is not possible in Firefox (in Linux).
3. I have also installed BlueGriffon Web Editor. BlueGriffon is a new WYSIWYG content editor for the World Wide Web. Powered by Gecko, the rendering engine of Firefox, it’s a modern and robust solution to edit Web pages in conformance to the latest Web Standards. Only to be compared with Dreamweaver. (In my opinion).
4. Other included important/useful packages are: LibreOffice, Thunderbird, GParted, Brasero, SMPlayer, GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.
5. I have also installed Nvidia Graphic driver 352.63 in the LXQt version. It has support for the following GPUs: Quadro K1200, Quadro M6000, GeForce 920M, GeForce 930A, GeForce 930M, GeForce 940M, GeForce GTX 950M, GeForce GTX 960M and GeForce GTX TITAN X. This driver will be used automatically if your card is supported.

WHAT’S SO SPECIAL about ExTiX and especially the new version from 160120?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 3 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. ExTiX LXQt is now more stable than ever. All packages have been upgraded to the latest version by 160120.
4. I’ve replaced kernel 4.2.0-16-exton with kernel 4.4.0-0-exton (Kernel.org‘s stable kernel 4.4).
5. The installation program Ubiquity (live installer) is now working as intended. I.e. a new user (your user) will be created during the installation process.

Screenshot of ExTiX 16.1 Desktop – LXQt 0.10.0

READ MORE…


3 Comments Exton Linux SystemsLinux

EXTON Linux MultiBootCD 6-OS – Build 160106

exton-multibootcd-boot-smallLatest News about EXTON Linux MultiBootCD 6-OS – 160106
A new version of EXTON Linux MultibootCD 6-OS is ready. Changes: New (latest) versions of Porteus, GParted, Puppy Linux (PuppEX Slacko), 4MLinux, SliTaz and Tiny Core. Note about VirtualBox: All systems but Porteus can run in VirtualBox. Why Porteus won’t run I don’t know.

usb-smallInstall EXTON MultiBootCD to a USB stick » HOWTO

READ MORE…

No Comments Exton Linux SystemsLinux

DebEX Build 160105 with Gnome 3.18.3 and Mate 1.12.1

debex-gnome-desktop-synaptic-160105-smallNEWS 160105 about DebEX
I have made a new extra version of DebEX, which I call DebEX Gnome Live DVD. It’s a pure Debian system using the testing (stretch) and unstable (sid) repositories. Two Desktop Environments are pre-installed. Gnome 3.18.3 – latest version – (Gothenburg) and Mate 1.12.1 (latest version). About Gnome 3.18: This release brings significant improvements to many of our core applications, from better Google Drive integration in Files to a list view in Boxes to firmware updates in Software, and several entirely new applications. I have also installed Nvidia’s proprietary graphic driver 352.63 in this new version of DebEX. To be able to enjoy Gnome 3.18.3 while running DebEX live (from DVD or a USB stick) you’ll need to have a new Nvidia Graphics card installed. You can see which cards are supported here. Otherwise you’ll have to settle for Mate 1.12.1. (Not a bad choice btw). Furthermore I have installed Google Chrome to make it possible to watch Netflix movies. All other installed packages have also been updated to the latest version as of 160105. DebEX Gnome uses kernel 4.3.0-5-exton.

Runs from RAM
DebEX Gnome can run from RAM. Use Boot alternative 2 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run DebEX from RAM. I.e. superfast! It’s absolutely the best way to enjoy a Linux live system. Especially if it is a “big” system and you have lots of RAM. (DebEX Gnome’s and KDE’s ISO files are of 1720 MB respectively 1490 MB).

KERNEL
DebEX Gnome uses kernel 4.3.0-5-exton equivalent to Kernel.org’s stable kernel 4.3.3. (Latest as of 160105).

About Nvidia’s proprietary Graphics driver 352.63
The Nvidia driver has support for the following GPUs (among others): GeForce 800A, GeForce 800M, GeForce GTX 970M and GeForce GTX 980M. Note: I DebEX Gnome version 160105 your Nvidia card will be automatically used (if it is supported). You can then log in to Gnome 3.18.3 from LightDM login page as root with password root. If your card isn’t supported you will get the dreaded error message saying Oh no! Something has gone wrong. Then log out and change Desktop Environment to Mate 1.12.1 before you go on and log in again. You simply can’t log in to Gnome. Perhaps you can fix it yourself after a hard drive installation of DebEX Gnome!?

The importance of the fact that DebEX Gnome is based on Debian testing and Debian unstable
I don’t think it matters too much. I.e. programs won’t crash or anything like that. I haven’t discovered any errors. Maybe you will if you do a full test of the system. Please let me know in that case.

Screenshot of the Gnome Desktop in version 160105 of DebEX Gnome

Screenshot of the Mate Desktop in version 160105 of DebEX Gnome

READ MORE…

2 Comments Exton Linux SystemsLinux

Run your Slackware 64 bit system with the latest stable kernel – 4.3.1!

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.3.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.3.1 is the latest stable kernel available from Kernel.org. Released yesterday (20151209).

What’s new in kernel 4.3.1?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.3.1-x86_64-exton.txzmd5sum
2. Install it with the command installpkg linux-kernel-4.3.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.3.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

1 Comment Linux

ExLight Linux Live DVD with Enlightenment 0.19.12 – 64 bit

exlight-logo-exton-black2-white-bgWHAT’S NEW IN ExLight Build 151031?
1. ExLight is now based on Ubuntu 15.10 (alias Wily Werewolf) and Debian 8.2 Jessie.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.19.12. All included packages have been updated to the latest available version as at October 31, 2015.
3. I have replaced kernel 4.0.0-4-exton with kernel 4.2.0-16-exton.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence! I’ve found two scripts which make the installation to USB very simple. The scripts are quite ingenious. My tests show that they work flawlessly on USB installations of all normal Ubuntu systems. Read my INSTRUCTION how to use the scripts.
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 3 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (live installer) is now working as intended in ExLight version 151031. I.e. a new user (your user) will be created during the installation process.
7. I have installed Nvidia Graphic driver 352.55.
8. The ISO file has decreased in size from 1200 MB to 1050 MB. It means that the system will run faster from DVD or USB stick. When you run ExLight from RAM everything will be superfast!

What’s new in kernel 4.2? One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

See two screenshots of the Enlightenment 0.19.12 Desktop – pic 1 (root’s Desktop)pic 2 (exlight’s Desktop)

READ MORE…

No Comments Exton Linux SystemsLinux

LFA Build 151024, 64 bit, with Fluxbox as Window Manager and Cairo-Dock as Desktop Interface

linux-logo-exton-lfaAbout Linux For All (LFA)
The system is based on Ubuntu 15.10, codenamed Wily Werewolf and Debian Jessie (Debian 8.2).
It’s a total rebuild. I.e. nothing is left of the old LFA system.

The system language is ENGLISH.

NEWS 151024
A new upgraded version of LFA is out. All installed packages have been updated to the latest version as of 151024.

Program content etc
Among many other programs Google Chrome (so you can watch Netflix movies), GParted (
a free partition editor for graphically managing your disk partitions), BlueGriffon Web Editor (works almost like Dreamweaver), Synaptic Package Manager, SMPlayer (a free media player with built-in codecs that can play virtually all video and audio formats) and PCManFM (a very fast file manager). In addition flash and all necessary additions in order to install programs from source. All programs have been updated to the latest available version as of October 24, 2015. See a complete list of all installed packages.

Used KERNEL

My special kernel 4.2.0-16-exton.

What’s new in kernel 4.2? One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

Screenshot of LFA’s new Desktop

READ MORE…

1 Comment Exton Linux SystemsLinux

ExTiX 15.4 – LXQt and KDE versions – Build 151017 with kernel 4.2.0-16-exton (4.2.3)

extix-15.4-extix-desktop-smallI have made two new versions of ExTiX – The Ultimate Linux System. I call them ExTiX 15.4 LXQt Live DVD respectively ExTiX 15.4 KDE Live DVD. (The previous version was 15.3).

ABOUT
ExTiX 15.4 LXQt/KDE Live DVD 64bit is based on Debian 8.2 Jessie/Ubuntu 15.10 Wily Werewolf. The original system includes the Desktop Environment Unity (Ubuntu). After removing Unity I have installed LXQt 0.9.0 respectively KDE Frameworks 5.15.0 with KDE 4.15. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment.

STABLE?
Ubuntu 15.10 will be released in a stable version 151022. Regardless of this fact you can consider both my ExTiX versions of 151017 as stable. The “Final Freeze” of Ubuntu 15.10 was yesterday (151016).

The system language is ENGLISH.

Used KERNEL
My special kernel 4.2.0-16-exton corresponding Kernel.org’s kernel 4.2.3.

What’s new in kernel 4.2? One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

extix-discussionScreenshot of ExTiX 15.4 Desktop – LXQt 0.9.0
Screenshot of ExTiX 15.4 Desktop – KDE 4.15
Login to LXQt
Login to KDE

READ MORE

2 Comments Exton Linux SystemsLinux