Tag: install to hard drive

exGENT (Gentoo) 64bit Live DVD with LXQt and kernel 4.15.14-aufs-gentoo-exgent – Build 180410 – can be installed in 2 min!

NEWS 20180410 about exGENT (Gentoo) 64 bit
I’ve made a new version of exGENT with only a few necessary packages pre-installed. It uses LXQt as Desktop environment and kernel 4.15.14-aufs-gentoo-exgent. The ISO file is of 1490 MB due to the fact that I’ve included the kernel sources. They are needed for installation of certain software. Despite this exGENT version 180410 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. I call my new version exGENT 2018 LXQt Live DVD. It replaces version 170407 and 170412. Those versions were too old for upgrading. I had to start over and build version 180410 from “scratch”. All installed packages in exGENT have been updated to the latest available version by 180410. Study the full package list.

What’s new in exGENT Build 180410?
The boot loader Grub Legacy has been replaced by Grub2. MOST IMPORTANT: In exGENT versions before 170309 the file system wasn’t writable when running exGENT live (from DVD). Now you can emerge (install) new programs/packages even while running the system from a DVD or USB stick. If you do that and later decide to install exGENT to hard drive all your changes will follow! Furthermore you can install/transfer exGENT to a USB stick with the dd command in Linux or use Etcher and Rufus in Windows. Such installations were impossible before. NOTE: I have not installed Google Chrome. It’s not needed anymore, since Netflix nowadays runs very well in Firefox. About the LXQt Desktop environment: LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel.

Used KERNEL

My special kernel 4.15.14-aufs-gentoo-exgent corresponding Kernel.org’s kernel 4.15.14.

Quick install to Hard Drive

exGENT Linux can be installed to hard drive in 2 – 8 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy. Read below on how the installation works.

UPGRADE the System
The exGENT System (version 180410) is in very good shape, since I, without problems, have been able to update the whole system with the following commands:

# emerge –ask –update –newuse –deep –with-bdeps=y @world
# emerge –depclean
# revdep-rebuild

NOTE 1: Before running the above three commands you’ll have to run the commands emerge –sync followed by emerge —oneshot portage

NOTE 2: After a hard drive installation of exGENT you should run the above commands at least every month (to keep the system in good shape).

SPOTIFY
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.
NOTE: Spotify is pre-installed in Build 180410.

Rolling distribution
Gentoo/exGENT is a rolling distribution, which implies that once you have installed the system on the hard drive there is no need for re-installations (which otherwise is common in the Linux world).

Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux. (Perhaps also for people who are bored with mainstream distributions like Ubuntu).

Screenshots

1. exGENT Build 180410 running Vlc
2. exGENT running Spotify
3. exGENT running Cups
4. exGENT running in VirtualBox
5. exGENT running in VMware

READ MORE…

 

No Comments extonExton Linux SystemsLinux

Android-x86 KitKat 4.4.4 Build 10 with GAPPS, three new Windows launchers, Bluetooth (working!) and Mesa 10.5.9

Android-x86 KitKat 4.4.4 Exton Build 180108, version 10, is a ready!
This new version (180108) is basically the same as AndEX KitKat Build 160214. I have now upgraded some apps and added three new (Windows) launchersComputer Launcher, Microsoft Launcher and Win 10 Launcher. To be able to run AndEX Oreo 8.1, which was released 180103, you’ll have to use a fairly new computer. AndEX KitKat runs also on older computers, which is one reason for me to remind you of the existence of AndEX KitKat 4.4.4. I can mention that this KitKat Build 10 works on my (very) old Acer Aspire 5102WLMi AMD with ATI Radeon Xpress 1100. Many 3D games run just fine. So you can use AndEX KitKat Build 180108 to bring an old PC back to useful life! I mean a PC on which you have an old (perhaps outdated) Windows system installed.

Features

I’ve added Mesa (3D Graphics Library) 10.5.9 for better Graphic performance. The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run this version without problems on a HP Pavilion 500-317no Desktop Computer. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a DVD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. Or transfer the ISO file to a USB stick with Rufus and run the system live from the USB stick. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store and Aptoide App Manager are pre-installed so you can just make your choices…

Replacement
This version (version 10) replaces all my previous (9) Android-x86 4.4.4 KitKat builds. In version 10 (as in version 9) I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. Everything just works.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.

Need to upgrade?
Well, if you have installed any of my previous KitKat versions with GAPPS to your hard drive and the system is working alright you don’t “have to” upgrade. That’s because (as I say above) all included GAPPS will be upgraded automatically (just like your Android phone). Otherwise you can contact me so I can send you the new download link. Then please show your previous receipt.

SCREENSHOTS
1. Choosing launcher
2. Desktop with Computer Launcher
3. Running YouTube
4. Running in VirtualBox
5. Running in VMware
6. First screen – auto turn

READ MORE…

No Comments AndroidextonExton Linux SystemsLinux

SlackEX Build 171223 (Slackware 14.2) live dvd/usb with KDE 4.14.38, kernel 4.14.8-x86_64-efi-exton, Nvidia 384.98 and VirtualBox 5.2.4

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD/USB, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 171223 of SlackEX
I have replaced kernel 4.12.9-x86_64-exton with kernel 4.14.8-x86_64-efi-exton with support for “everything”. Kernel 4.14.8 was released 171220. KDE is upgraded to version 4.14.38 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.2.4 (latest, not in Slackware’s repositories), Google Chrome 63.0.3239.108 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), SMPlayer 17.11.2, GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 57.0.2, Thunderbird 52.5.0, Samba 4.7.3 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

SCREENSHOTS
Screenshot 1 – KDE 4.14.38 Desktop with Netflix running
Screenshot 2 – KDE 4.14.38 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia settings and GSlapt running
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox
Screenshot 6 – SMPlayer running

The end of the road…
I will end my SlackEX project now. It’s not needed anymore (if it ever was). Alienbob’s Slackware systems are built with liveslak scripts. Anyone can use the scripts. No special knowledge of Slackware (or Linux) is needed. A lot of different Slackware systems (built with liveslak) can be downloaded. They can all be installed to hard drive using a script called setup2hd. They can also be transferred to a USB stick using a script called iso2usb.sh.

READ MORE about SlackEX….

2 Comments Exton Linux SystemsLinux

SlackEX Build 170831 (Slackware 14.2) live dvd with KDE 4.14.35, kernel 4.12.9-x86_64-exton, Google Chrome 60.0.3112 and VirtualBox 5.1.26

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 170831 of SlackEX
I have replaced kernel 4.10.2-x86_64-exton with kernel 4.12.9-x86_64-exton with support for “everything”. Most important is that I have changed repositories from Slackware 14.1 to Current. I.e. Slackware 14.2. KDE is upgraded to version 4.14.35 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.1.26 (latest, not in Slackware’s repositories), Google Chrome 60.0.3112 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 55.0.3, Thunderbird 52.3.0, Samba 4.6.7 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

SCREENSHOTS
Screenshot 1 – KDE 4.14.35 Desktop with Netflix running
Screenshot 2 – KDE 4.14.35 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia configuration
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox

READ MORE….

No Comments extonExton Linux SystemsLinux

Android-x86_64 Nougat 7.1.2 – Build 170619 – with GAPPS and kernel 4.9.31-exton-android-x86_64

News 170621 about AndEX 7.1.2
Yesterday I said that AndEX 7.1.2 couldn’t run in VirtualBox and VMware. Actually it can! It just takes about 10 min for the Desktop to show up when running AndEX live. (I mean directly from the ISO file). Watch this screenshotVirtualBox and this screenshot – VMware. Just give AndEX enough RAM. I gave AndEX 3GB. You can (of course) also install AndEX to a virtual hard drive in VirtualBox and VMware. The system will be very responsive then.

NEWS 170619 about AndEX Nougat 7.1.2
My new build of Android x86_64 – android_x86_64-7.1.2-nougat-gapps-kernel-4.9.31-exton-990mb-170619.iso can be installed to hard drive or on a USB stick. You can also run the system live. I.e. from a DVD or a USB stick. On some computers you’ll have to start up AndEX 7.1.2 in compatibility mode (VESA) though. GAPPS and all other apps mentioned below are installed. NOTE: You can run AndEX Nougat Build 170619 on newer laptops and Desktop computers. Sound won’t work on all though – see below. The video performance is generally very very good.

Screenshot
– AndEX Build 170619 – the Desktop

MORE NEWS 170619: AndEX – Nougat 7.1.2 with kernel 4.9.31-exton-android-x86_64 and GAPPS
My new build of Android-x86_64 Nougat 7.1.2 have GAPPS pre-installed. I.e. Google Play Services 11.0.55, Google Play Store 7.9.52-Q-all, Aptoide App Manager, Google Play Games 3.9.08 (needed for Clash of Clans to run), Gmail 7.6.4 and YouTube 12.14.56. Also many other apps. For example: Spotify 8.4.4.810, Clash of Clans 9.24.16, File Manager 2.0.0.355, HD Camera Ultra 2.3.1 (works very well), Google Maps 9.50.2, SnapTube 4.3.0, Firefox 54.0 (latest version) and Rotation Control Pro 1.1.9.

PREREQUISITE
The system can be installed manually to hard drive. To be able to do that you must have at least one Linux system installed on your hard drive. You must also use Grub as boot loader. You can also (or alternatively) install AndEX 7.1.2 while running the system from a DVD or from a USB stick. Use preferable Rufus to create a bootable USB stick. Or burn the ISO file (android_x86_64-7.1.2-nougat-gapps-kernel-4.9.31-exton-990mb-170619.iso) to a DVD and run the system from it.

ABOUT Andex Nougat 7.1.2
My compiled Android-x86_64 system (Nougat 7.1.2) can run live or from hard drive on certain computers. The system can run and be installed on almost all newer laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run my new Nougat version without problems on a HP Pavilion 500-317no Desktop Computer. The Android-AndEX 7.1.2 system is distributed in the form of a Zip file and a ISO file. You can do a manual installation to hard drive. That can even be done to a drive where you already have another Linux system (for example Ubuntu 17.04) installed. That’s sort of a Frugal Installation (normally used by Puppy Linux). Read more about different installations of AndEX Nougat 7.1.2 at the INFO site.

Android Nougat 7.1.2 was released 170403.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX Nougat Build 170619 almost all apps and games can be installed via Google Play Store. You can even install very big games (of 1GB or so), but unfortunately almost all such games need a touchscreen. Clash of Clans (pre-installed) works very good though. So does Angry Birds. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

Screenshots
Screenshot 1 – Nougat boot animation (which you must see during the boot. If not, the installation was unsuccessful)
Screenshot 2 – AndEX Nougat 7.1.2 Desktop
Screenshot 3 – AndEX Nougat 7.1.2 – Google Play Store running
Screenshot 4 – AndEX Nougat 7.1.2 – Aptoide App Manager running
Screenshot 5 – AndEX Nougat 7.1.2 – Spotify running
Screenshot 6 – AndEX Nougat 7.1.2 – Showing all installed apps

READ MORE…

1 Comment AndroidextonExton Linux SystemsLinux

exGENT (Gentoo) 64 bit Linux Live DVD with Xfce4, Grub2 and kernel 4.10.1-gentoo-exton – Build 170303

NEWS 20170303 about exGENT
I’ve made yet a new version (20170303) of exGENT based on Gentoo Linux. Now with Xfce 4.12.1 and kernel 4.10.1. It is for the 64 bit architecture. I call it exGENT 2017 Xfce4 Live DVD. It replaces version 20170209. The ISO file is of 2760 MB due to the fact that this version has a lot of packages pre-installed. Despite this exGENT version 170303 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 170303.

What’s new in exGENT Build 170303?
The boot loader Grub Legacy has been replaced by Grub2. I started this build in the hope that I should be able to implement a new independent installer program called Calamares. I wasn’t able to do it now though. (Many dependencies to satisfy). My old installer script will have to do until I find a solution. Anyway, I think exGENT Build 170303 can be of interest because of the change to Grub2 and the fact that it has the newest kernel installed.

Used KERNEL
My special kernel 4.10.1-gentoo-exton corresponding Kernel.org’s kernel 4.10.1. It’s the latest stable kernel as of now. (20170303).

What’s new in kernel 4.10?

Programs etc
The best thing with exGENT is the premier auto detection of hardware and the ability to easily install the system to hard drive during a live session. Installed programs: Among many others GParted, GNU Emacs, Firefox, Google Chrome, Vlc, Spotify, Thunderbird, Samba, AbiWord,
Nvidia Graphics driver 378.09 and NetworkManager. Furthermore compilation tools so that you can install programs from source the Gentoo way. (After the installation to hard drive).

Quick install to Hard Drive
exGENT Linux can be installed to hard drive in 3 – 10 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy.

SPOTIFY
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.
NOTE: Spotify is pre-installed in Build 170303.

Google Chrome
To be able to run Netflix in exGENT you’ll need Google Chrome. Just install it with the command emerge –ask www-client/google-chrome
Screenshot 1
Screenshot 2
Screenshot 3 – Netflix is running
NOTE: Google Chrome is pre-installed in Build 170303.

Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux. (Perhaps also for people who are bored with mainstream distributions like Ubuntu).

Screenshots
exGENT running Nvidia config
exGENT running Brasero
exGENT running Samba
exGENT running Spotify
exGENT running in VirtualBox
exGENT running in VMware
exGENT running Google Chrome and Netflix

READ MORE about exGENT…

2 Comments extonExton Linux SystemsLinux

CruxEX 3.3 (CRUX 3.3) live USB with LXDE and kernel 4.9.9-exton – Build 170216

CruxEX 3.3 64 bit Linux Live USB is based on CRUX 3.3 (latest version, released 170212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86-64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.3 2017 uses the LXDE Desktop environment. I have replaced the original CRUX kernel with “my” special kernel 4.9.9-exton, with support for “extra everything”.

Kernel etc
Kernel 4.9.9 is the latest available stable kernel as of 170216. Among all installed and updated applications are Firefox 51.0, GParted 0.27, File Roller 3.22 (Archive Manager), Gimp 2.8.18, Nvidia Graphics driver 375.26 and Wicd 1.7.2. Furthermore compilation tools so that you can install programs from source.

Unique
CruxEX 3.3 2017 build 170216 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading.

See a screenshot of the LXDE Desktop

Screenshot: Prt-get in action

Study ALL installed packages…

READ MORE…

1 Comment extonExton Linux SystemsLinux

exGENT (Gentoo) 64 bit Linux Live DVD with kernel 4.9.8-gentoo-exton – Build 170209

NEWS 20170209 about exGENT
I’ve made yet a new version (20170209) of exGENT based on Gentoo Linux. Now with Xfce 4.12.1 and kernel 4.9.8. It is for the 64 bit architecture. I call it exGENT 2017 Xfce4 Live DVD. It replaces version 20160123. The ISO file is of 2590 MB due to the fact that this version has a lot of packages pre-installed. Despite this exGENT version 170209 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 170209.

Build 170209 of exGENT replaces Build 170206
Today I discovered some errors in exGENT Build 170206. They were not important, but nevertheless annoying. Build 170209 is totally error-free (as far as I know). While I was at it I installed Google Chrome (for all Netflix addicts) and Spotify (for all music lovers).

Used KERNEL
My special kernel 4.9.8-gentoo-exton corresponding Kernel.org’s kernel 4.9.8. It’s the latest stable kernel as of now. (20170209).

What’s new in kernel 4.9.8?
Programs etc
The best thing with exGENT is the premier auto detection of hardware and the ability to easily install the system to hard drive during a live session. Installed programs: Among many others GParted, GNU Emacs, Firefox, Google Chrome, Spotify, Thunderbird, Samba, AbiWord,
Nvidia Graphics driver 375.26 and NetworkManager. Furthermore compilation tools so that you can install programs from source the Gentoo way. (After the installation to hard drive).

Quick install to Hard Drive
exGENT Linux can be installed to hard drive in 3 – 10 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy.

SPOTIFY
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.
NOTE: Spotify is pre-installed in Build 170209.

Google Chrome
To be able to run Netflix in exGENT you’ll need Google Chrome. Just install it with the command emerge –ask www-client/google-chrome
Screenshot 1
Screenshot 2
Screenshot 3 – Netflix is running
NOTE: Google Chrome is pre-installed in Build 170209.

Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux. (Perhaps also for people who are bored with mainstream distributions like Ubuntu).

Screenshots
exGENT running Nvidia config
exGENT running Brasero
exGENT running Samba
exGENT running Spotify
exGENT running in VirtualBox
exGENT running in VMware
exGENT running Google Chrome and Netflix

READ MORE…

1 Comment extonLinux

Android-x86_64 Nougat 7.0 with GAPPS and kernel 4.4.19-exton-android-x86_64

andex-nougat-home-desktop-smallestNEWS 160904: AndEX – Nougat 7.0 with kernel 4.4.19-exton-android-x86_64 and GAPPS
My build of Android-x86_64 Nougat 7.0 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Gmail, YouTube and more apps. For example: Aptoide App Manager. The ISO is called android-x86_64-7.0-nougat-gapps-exton-build-689mb-160904.iso.

ABOUT Andex Nougat
My compiled Android-x86_64 system (Nougat 7.0) can run live (from CD) on certain computers. It is best installed to a USB stick or to hard drive and running from there. The system can, however, be installed on almost all newer laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run this Nougat version without problems on a HP Pavilion 500-317no Desktop Computer. I could also run it very well live on the HP Desktop computer. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD before you can install AndEX Nougat to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can also download my Android Nougat system in the form of a zip-file (android-x86_64-7.0-nougat-gapps-exton-build-731mb-160904.zip) and do a manual installation to hard drive. That can even be done to a drive where you already have another Linux system (for example Ubuntu 16.04) installed. Read more about different installations below.

Android Nougat 7.0 was released 160822.

More about AndEX Nougat
Nougat 7.0 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Nougat. It uses “my” special kernel 4.4.19-exton-android-x86_64 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2016-02-14 will also cost you 9 $. It has two advantages over the Nougat and Marshmallow versions: The system can be used also on older laptops and it runs very well live in VirtualBox. Read more about the KitKat 4.4.4 version 160214 or DOWNLOAD it instantly.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX Nougat Build 160904 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

NOTE1/WARNING1
You must use a fairly new/modern computer. Android-x86_64 Nougat won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 Build 160214 will run also on older computers.

NOTE2/WARNING2
Before you buy and download this version of AndEX Nougat you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86_64 system. Some very big (around 1GB) games for example won’t run. On the other hand I could run Pes Club Manager, which is of 866 MB and Traffic Rider of about the same size. You must also be aware of that some (many) games need a touchscreen.

Screenshots
Screenshot 1 – AndEX Nougat Desktop
Screenshot 2 – AndEX Nougat – The Desktop at first boot
Screenshot 3 – AndEX Nougat – The beginning of your configuration – Give Google Play Services all permissions and you won’t see any error messages
Screenshot 4 – AndEX Nougat – Google Play Store running
Screenshot 5 – AndEX Nougat – Adding a Gmail account – must be done for Google Play Store to work
Screenshot 6 – AndEX Nougat – Aptoide App Manager running
Screenshot 7 – AndEX Nougat Desktop with some extra apps installed – Firefox, Google Chrome, Spotify and Traffic Rider

READ MORE…

3 Comments AndroidextonExton Linux SystemsLinux