Tag: Synaptic

Exton|OS 64 bit – based on Ubuntu 18.04.1 LTS – with Budgie Desktop, Refracta Snapshot, Calamares Installer and kernel 4.20.0-rc1-exton – Build 181109

NEWS 181109 ABOUT Exton|OS with Budgie Desktop 10.4 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.4. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in Build 181109: Refracta Snapshot, Calamares 3.1.12, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 4.20.0-rc1-exton (corresponding Kernel.org‘s latest kernel 4.20-rc1) is used. All packages have been updated to the latest available version as at November 9, 2018. Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 181109
This Exton|OS version is for non-efi computers, which means that you can use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.

WHAT’S NEW in kernel 4.20?

IMPORTANT ABOUT REFRACTA Snapshot
Refracta Snapshot is pre-installed in Exton|OS Build 181109. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 15 – 40 min! You’ll find the ISO in /home/snapshots. (Or change that in /etc/refractasnapshot.conf). The whole thing is very simple.

SCREENSHOTS
Screenshot 1
– Exton|OS’s Budgie live Desktop
Screenshot 2 – Exton|OS’s Budgie root Desktop
Screenshot 3 – Exton|OS’s Budgie Desktop installing Spotify
Screenshot 4 – Exton|OS’s Budgie Desktop running Refracta Snapshot
Screenshot 5 – Exton|OS running in VMware
Screenshot 6 – showing how to add apps to Docky

READ MORE…

No Comments extonExton Linux SystemsLinux

About my Ubuntu Build (ExTiX) from 161203 for Intel Compute Sticks with LXQt 0.10.0 and kernel 4.8.0-26-exton-IntelAtom

News 181020
Today I was about to make a new version of my ExTiX Build from 161203. I quickly learned that it isn’t necessary. It turns out that full support for the Intel Compute Stick is included in all kernels from version 4.11 until today’s releases (4.18). Kernel 4.8.0-26-exton-IntelAtom (which was used in my build from 161203) was patched – see my INFO site. Without patches it wouldn’t have worked. Today any Linux system can run on the stick. At least all Ubuntu versions from which I have experience. This means (of course) that all ExTiX flavors can run on the stick. The only thing to think about is that the Grub boot line has to be somewhat special – see my INFO site. Those of you who have installed ExTiX Build 161203 can just upgrade the system from 16.10 to 18.04.1 LTS and then install a new kernel. For example “my” Ubuntu kernel 4.18.12-exton, which you can download. First open /etc/apt/sources.list with Leafpad and replace all instances of yakkety with bionic. Then run the command sudo apt update. After that you can upgrade the whole system using Synaptic. I have done it myself today so I know it works.

READ MORE…

No Comments extonExton Linux SystemsLinux

RaspEX based on Ubuntu 18.10 with LXDE, kernel 4.14.74, Raspotify, RealVNC, PuTTy, Samba and Bluetooth – Build 181015

NEWS 181015 about RaspEX with LXDE based on (upcoming) Ubuntu 18.10
I have upgraded the whole system and replaced the old kernel 4.14.30-v7+ with kernel 4.14.74-v7+. RaspEX Build 181015 is a Linux ARM system for Raspberry Pi 3 Model B, 3 Model B+ and Raspberry Pi 2. It is based on Debian 9 Stretch, (upcoming) Ubuntu 18.10 Cosmic Cuttlefish and Linaro (Open Source software for ARM SoCs). In this new version (181015) I’ve installed Wicd Network Manager. Both Firefox ESR and Chromium are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 181015.

Raspberry Pi 3 Model 3 B+: How much better is it than the Raspberry Pi 3 Model B? The tiny computer is supposed to be faster and better in every way, including upgraded processor speed, wireless internet, and Ethernet connections.

Softpedia review
RaspEX version 181010 with BunsenLabs was reviewed by Softpedia 181010.

Compatibility :: October 2018

Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1 and RaspArch. I have until now (181015) upgraded RaspEX, RaspEX with OpenCPN, RaspArch and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

How to use Raspotify
Raspotify (Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi
that just works) is pre-installed and immediately ready for connections. You’ll need a
Spotify Premium account in order to connect to for example your mobile phone running Spotify.
1. Screenshot of my mobile phone showing Devices available when RaspEX is running
2. Screenshot of my mobile phone showing the possibility to connect to Raspotify
3. Screenshot of my mobile phone when Raspotify is connected and running

THE IMPORTANCE of RaspEX LXDE now being based on Ubuntu 18.10 (UNSTABLE/DEVELOPMENT)

I don’t think it is too important since RaspEX doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report. Besides Ubuntu 18.10 will be released 181018 in a stable version. The FinalFreeze was already 181011 though.

SCREENSHOTS
Screenshot 1 – root’s Desktop 181015
Screenshot 2 – raspex’s Desktop 181015
Screenshot 3 – RaspEX connected to Windows via Samba
Screenshot 4 – RaspEX connected to Windows via PuTTy
Screenshot 5 – RaspEX “running on” Windows with VNC-viewer
Screenshot 6 – RaspEX using Pavucontrol (for sound control)
Screenshot 7 – RaspEX running SMPlayer
Screenshot 8 – RaspEX running the Bluetooth Manager
Screenshot 9 – RaspEX running Raspotify
Screenshot 10 – Resizing system and creating SWAP space

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

RaspEX Build 181010 especially made for the new Raspberry Pi 3 Model B+ with the very fast BunsenLabs Helium Desktop

NEWS 181010 about RaspEX for Raspberry Pi 3 Model B, 3 Model B+ and Raspberry Pi 2
I’ve made a new extra version of RaspEX with BunsenLabs Helium Desktop. BunsenLabs Linux is a distribution offering a light-weight and easily customizable Openbox desktop. The project is a community continuation of CrunchBang Linux. The current release is Helium, derived from Debian 9 (Stretch). My new RaspEX BunsenLabs Build is a Linux ARM system for Raspberry Pi 3 Model B, 3 Model B+ and Raspberry Pi 2. It is based on Debian 9 Stretch, Ubuntu 18.04 LTS and Linaro (Open Source software for ARM SoCs). BunsenLabs Openbox Desktop is even faster than LXDE, which is used as Desktop environment in RaspEX Build 180328. In this new version (181010) I’ve installed Wicd Network Manager and replaced Firefox with the Chromium Web Browser and PulseAudio for better sound in YouTube.

Study all installed packages in RaspEX BunsenLabs Build 181010.

Compatibility :: October 2018
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1 and RaspArch. I have until now (181010) upgraded RaspEX, RaspEX with OpenCPN, RaspArch and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Stretch) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. If you use the new Raspberry Pi 3 Model B+ it will be even faster! Especially if you run RaspEX Build 181010 with BunsenLabs and Openbox.

SCREENSHOTS
Screenshot 1 – root’s Desktop 181010
Screenshot 2 – raspex’s Desktop 181010
Screenshot 3 – RaspEX running YouTube
Screenshot 4 – RaspEX choosing wallpaper

READ MORE…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

1 Comment extonExton Linux SystemsLinuxRaspberry Pi

RaspEX especially for Raspberry Pi 3 Model B+ – based on Ubuntu 18.04 LTS – with OpenCPN 4.99.0 pre-installed ::: Build 180331

RaspEX – Build 180331 based on Ubuntu 18.04 LTS – with OpenCPN 4.99.0 (latest version) – especially made for the new Raspberry Pi 3 Model B+, but it can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

Replacement
This build (180331) replaces build 160703. Ubuntu has been upgraded to version 18.04 LTS and OpenCPN to version 4.99.0 – latest. Build 180331 is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

ABOUT RaspEX Build 180331
RaspEX is a Linux ARM system for Raspberry Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Stretch (Debian 9), Bionic Beaver (Ubuntu 18.04 LTS) and Linaro (Open Source software for ARM SoCs). In this new version (180331) I’ve installed OpenCPN 4.99.0 from source. (You can’t yet find OpenCPN 4.99.0 in any software repositories).

Read this OpenCPN Review….

Raspberry Pi 3 Model 3 B+: How much better is it than the Raspberry Pi 3 Model B? The tiny computer is supposed to be faster and better in every way, including upgraded processor speed, wireless internet, and Ethernet connections.

SCREENSHOTS
1. RaspEX version 180331 running OpenCPN as the ordinary user raspex
2. RaspEX version 180331 running OpenCPN as root
3. OpenCPN 4.4.0 running on the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
4. OpenCPN 4.4.0 – Boston (old version OpenCPN)
5. OpenCPN World Map (old version of OpenCPN)
6. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
7. OpenCPN New York – Approaches to New York (old version of OpenCPN)
8. OpenCPN Stockholm Archipelago (old version of OpenCPN)

Compatibility :: March 2018
Unfortunately not all systems made for Raspberry Pi 3 Model B and 2 Model B will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2 and RaspArch. I have until now (180331) only upgraded RaspEX and RaspEX with OpenCPN. Read about the new Raspberry Pi 3 Model B+…

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 180316 with Refracta Tools

NEWS 180316 about Raspberry Pi Debian Pixel – 32bit – an Exton Build
My second Debian Pixel Build from is from 170425 . My third build is from 180316. Study all included packages – latest by 180316. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

Most important changes in Build 180316
This build replaces version 161223 and 170425. I’ve upgraded Raspbian/Debian from Jessie to Stretch – Debian stable. I’ve also upgraded the kernel from 3.16.0-4-686-pae to 4.9.0-9-686-pae. I’ve also included kernel 4.9.0-9-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies.

OLD NEWS FROM 161223
On December 22, 2016 I read that the Raspberry Pi Foundation had announced the release of a new PIXEL image that can be booted on a PC or Mac. Study this site. I saw immediately that there was no installer included, which I thought was a little disappointing. Come to think of Refracta tools, which work very well in Debian and Ubuntu. I quickly made a “remix” of the Raspberry Pi Foundation PIXEL image. My remix thus include Refracta tools. This means that you can easily install the system to hard drive and you can just as easily make your own remix of the Raspberry Pi Foundation PIXEL image. I’ve added a few packages. Most important Synaptic, which I find essential.

SCREENSHOTS
Screenshot 1 – Spotify running
Screenshot 2 – Samba running (reach your Windows computers in your network)
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Refracta Installer has started in VMware
Screenshot 5 – Wireless connection with NetworkManager (installed in Build 170425 and 180316)
Wifi connection using NetworkManager – in detail

READ MORE…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat 7.1.2!

1 Comment extonExton Linux SystemsLinuxRaspberry Pi

ExLight 64 bit Linux with Enlightenment 0.20, kernel 4.13.0-16-exton and Refracta Tools (create your own Ubuntu live installable system)

WHAT’S NEW IN VERSION 171112?
NOTE: Version 171112 replaces version 170105.

1. ExLight is now based on Ubuntu 17.10 (alias Artful Aardvark) and Debian Buster/Stretch.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.9.0-11-exton with my special kernel 4.13.0-16-exton corresponding Kernel.org’s stable kernel 4.13.4.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (Ubuntu’s live installer) has been replaced with Refracta Installer. Very simple to use! A new user (your user) will be created during the installation process. The reason for the replacement is that Ubiquity is a bit too complicated and that the program crashes once in a while.
7. I have installed Nvidia’s proprietary graphics driver 384.98.
8. I have added seven animated wallpapers.
9. MOST IMPORTANT: I’ve added Refracta Snapshot, which make it possible for you to create your own live installable Ubuntu system. I mean change everything to your liking, fire up Refracta Snapshot and wait 3 – 5 min until your new ISO is ready!

What’s new in kernel 4.13?

Some cool things to do in ExLight Linux…

Screenshots
ExLight – running Refracta Snapshot
ExLight running in VirtualBox
ExLight running Spotify
ExLight running Samba
ExLight running in VMware

READ MORE…

Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Nougat!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

1 Comment extonExton Linux SystemsLinux

Exton|OS Light Build 170918 :: Based on upcoming Ubuntu 17.10 with Refracta tools and kernel 4.13.0-11-exton (4.13.1)

exton-os-logo-worldNEWS 170918 about Exton|OS Light Live DVD – now with Refracta tools!
I’ve made a new extra version of Exton|OS based on Ubuntu 17.10 (alias Artful Aardvark) 64 bit with only a minimum of packages pre-installed. Among them a terminal emulator (LXTerminal), a Web Browser (Google Chrome – so you can run Netflix), SMPlayer, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PCManFM (file manager), Gimp, NetworkManager, GParted (Partition Editor), Samba (so you can reach your Windows computers), Audacious (a small and fast audio player which supports lots of formats) and Synaptic (Package Manager). I give you the pleasure of installing all extra packages you need after a hard disk installation of Exton|OS Light. Use Synaptic for that. You can of course also install new packages while running the system live (from DVD/USB stick), but nothing will be saved after a reboot. Unless you have followed my USB Install Instruction (under B) or used UNetbootin) and used Boot alternative 2 – Persistent when you have used UNetbootin. If you have plenty of RAM you can even install big programs (such as LibreOffice) while running the system live even from DVD. Exton|OS Light’s Window manager Openbox guarantees lightness and elegance.

Replacement
This version of Exton|OS Light from 170918 replaces version 161021 of Exton|OS Light. Exton|OS Light is now based on Debian Stretch/Sid and Ubuntu 17.10 (to be released in October, 2017).

About
Exton|OS Light Live CD is based on Ubuntu 17.10 Artful Aardvark 64 bit and Debian Stretch/Sid. Exton|OS Light’s ISO file (of 1240 MB) is a ISO-hybrid, which means that it can very easily be transferred (copied) to an USB pen drive. You can then even run Exton|OS from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence! Read my USB INSTRUCTION under B).

Packages
All installed packages in Exton|OS Light have been updated to the latest available version as at September 18, 2017. Study the full package list.

IMPORTANT ABOUT REFRACTA TOOLS
Refracta tools are pre-installed in Exton|OS Light Build 170918 (as well as in Exton|OS Mate Build 170609). Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 17.10 Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS Light to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 15 min! You’ll find the ISO in /home/snapshots. (Or change that in /etc/refractasnapshot.conf). The whole thing is very simple. Refracta Installer replaces Ubiquity (Ubuntu’s installer). Refracta Installer is also very simple to use. No “expert knowledge” is needed.

THE IMPORTANCE of Exton|OS Light now being based on Ubuntu 17.10 (UNSTABLE/DEVELOPMENT)
I don’t think it is too important since Exton|OS doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs wont crash or anything like that. And I haven’t discovered any bugs to report.

SCREENSHOTS
1. Screenshot of Exton|OS Light running in VMware
2. Screenshot of Exton|OS Light’s Openbox Desktop
3. Screenshot of Exton|OS Light’s Openbox Desktop when Samba is used
4. Screenshot when Google Chrome with Netflix is running
5. Screenshot when Spotify is running – (install Spotify with: sudo apt-get install spotify-client)

READ MORE…

Other Exton Linux Live CD/DVD’s in English you may like to download…

EXTON Linux

1 Comment extonExton Linux SystemsLinux

LFA (Linux For All) 64bit Build 170121 with Wine (for HBO Movies/Nordic), Google Chrome (for Netflix) and kernel 4.9.5 (latest)

About Linux For All (LFA) Build 170121
The system is based on Ubuntu 16.04.1 LTS and Debian Jessie. It’s a total rebuild. I.e. nothing is left of the old LFA system.

NEWS ABOUT LFA Build 170121
1. This is a very BIG system (2020 MB). All packages the ordinary Linux user can wish for are pre-installed. Study the full packages list.
2. Kernel 4.9.0-15-exton corresponding Kernel.org’s latest stable kernel 4.9.5 is used. It was released yesterday (170120). You can download “my” kernel and install it in another Ubuntu/Debian system (if you want).
3. I have installed Nvidia’s latest proprietary graphics driver 375.26.
4. The Desktop environment is LXDEDesigned to be user friendly and slim, while keeping the resource usage low.
5. The main Web Browser is Google Chrome. So you can watch Netflix!
6. I have installed Wine just to be able to install Firefox for Windows (which I have done). The Windows version is needed if you want to watch  HBO Movies/HBO Nordic. The Pepper Flash plugin just doesn’t work anymore in Ubuntu. With Wine installed you can install many other Windows programs using PlayOnLinux. (Also pre-installed by me).

SCREENSHOTS
1. LFA Build 170121 running Firefox for Windows and HBO Movies
2. LFA Build 170121 running Wicd Preferences and sudo iwconfig
3. LFA Build 170121 running Nvidia  Preferences and Synaptic
4. LFA Build 170121 running PlayOnLinux for installing Windows programs
5. LFA Build 170121 running Rufus and Wine
6. LFA Build 170121 running Samba to reach Windows computers

NOTE: If you want to Build your own live installable Ubuntu 16.10 system you can download LFA Build 161114, which has Refracta Snapshot pre-installed. I was not able to include Refracta Snapshot in Build 170121.

READ MORE…

1 Comment extonExton Linux SystemsLinux

ExLight 64 bit Linux with Enlightenment 0.20, kernel 4.9.0-11-exton and Refracta Tools (create your own Ubuntu system)

WHAT’S NEW IN VERSION 170105?
NOTE: Version 170105 replaces version 161016.

1. ExLight is now based on Ubuntu 16.10 (alias Yakkety Yak) and Debian Jessie/Stretch.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.8.0-21-exton with my special kernel 4.9.0-11-exton corresponding Kernel.org’s stable kernel 4.9. If you want to use “my” kernel in another Ubuntu/Debian system you can download it.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (Ubuntu’s live installer) has been replaced with Refracta Installer. Very simple to use! A new user (your user) will be created during the installation process. The reason for the replacement is that Ubiquity is a bit too complicated and that the program crashes once in a while.
7. I have installed Nvidia’s proprietary graphics driver 375.26.
8. I have added seven animated wallpapers.
9. MOST IMPORTANT: I’ve added Refracta Snapshot, which make it possible for you to create your own live installable Ubuntu system. I mean change everything to your liking, fire up Refracta Snapshot and wait 3 – 5 min until your new ISO is ready!

What’s new in kernel 4.9?

enlightenment-logoInstalled packages
The Desktop Environment is Enlightenment 0.20.99.0 (Beauty at your fingertips). Kernel 4.9.0-11-exton is used. (Kernel.org‘s stable kernel 4.9). Program content: Refracta Tools, LibreOffice, Synaptic, GParted, SMPlayer (an alternative to Vlc), Wicd, PCManFM, Google Chrome (for watching Netflix movies) and Gimp. Furthermore compilation tools so that you can install programs from source. I have also included Nvidia’s proprietary graphics driver 375.26. It has support for the following GPUs (among others): Quadro M3000 SE, GeForce 10, GeForce 900, GeForce 800A, GeForce 800M, GeForce 700, Quadro Series, GeForce GTX 970M and GeForce GTX 980M. Study the full ExLight program LIST. All packages have been updated to the latest available version as at January 5, 2017.

Some cool things to do in ExLight Linux…

Screenshots
ExLight – running Refracta Snapshot
ExLight running Google Chrome with Netflix
ExLight running Spotify
ExLight running Samba
ExLight running in VMware

READ MORE about ExLight…

Other Exton Linux Systems you may like
All Exton Linux Systems
Exton Systems for the Raspberry Pi computer
Exton Android Systems for PC

1 Comment extonExton Linux SystemsLinux