NEWS 20180410 about exGENT (Gentoo) 64 bit
I’ve made a new version of exGENT with only a few necessary packages pre-installed. It uses LXQt as Desktop environment and kernel 4.15.14-aufs-gentoo-exgent. The ISO file is of 1490 MB due to the fact that I’ve included the kernel sources. They are needed for installation of certain software. Despite this exGENT version 180410 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. I call my new version exGENT 2018 LXQt Live DVD. It replaces version 170407 and 170412. Those versions were too old for upgrading. I had to start over and build version 180410 from “scratch”. All installed packages in exGENT have been updated to the latest available version by 180410. Study the full package list.
What’s new in exGENT Build 180410?
The boot loader Grub Legacy has been replaced by Grub2. MOST IMPORTANT: In exGENT versions before 170309 the file system wasn’t writable when running exGENT live (from DVD). Now you can emerge (install) new programs/packages even while running the system from a DVD or USB stick. If you do that and later decide to install exGENT to hard drive all your changes will follow! Furthermore you can install/transfer exGENT to a USB stick with the dd command in Linux or use Etcher and Rufus in Windows. Such installations were impossible before. NOTE: I have not installed Google Chrome. It’s not needed anymore, since Netflix nowadays runs very well in Firefox. About the LXQt Desktop environment: LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel.
My special kernel 4.15.14-aufs-gentoo-exgent corresponding Kernel.org’s kernel 4.15.14.
Quick install to Hard Drive
exGENT Linux can be installed to hard drive in 2 – 8 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy. Read below on how the installation works.
UPGRADE the System
The exGENT System (version 180410) is in very good shape, since I, without problems, have been able to update the whole system with the following commands:
# emerge –ask –update –newuse –deep –with-bdeps=y @world
# emerge –depclean
NOTE 1: Before running the above three commands you’ll have to run the commands emerge –sync followed by emerge —oneshot portage
NOTE 2: After a hard drive installation of exGENT you should run the above commands at least every month (to keep the system in good shape).
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.
NOTE: Spotify is pre-installed in Build 180410.
Gentoo/exGENT is a rolling distribution, which implies that once you have installed the system on the hard drive there is no need for re-installations (which otherwise is common in the Linux world).
Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux. (Perhaps also for people who are bored with mainstream distributions like Ubuntu).
1. exGENT Build 180410 running Vlc
2. exGENT running Spotify
3. exGENT running Cups
4. exGENT running in VirtualBox
5. exGENT running in VMware
NEWS about ExTiX 18.2 Deepin 180210
I’ve released a new version of ExTIX 18.2 Deepin today with Calamares 3.1.9 installed from source and kernel 4.15.2-exton. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. All packages have been updated to the latest available version as of today. Study all installed packages in ExTiX Deepin Build 180210. Please note that I’ve kept the first ExTiX 18.2 Deepin Build 180206 on the server. The kernel 4.15.1-x86_64-exton, used in Build 180206, is compiled in another way than kernel 4.15.2-exton used in Build 180210. In version 180206 of ExTiX 18.2 Deepin I “forgot” to install the kernel headers. That was the main reason for me to release a new version of ExTiX 18.2 Deepin again. The kernel headers are needed if you want to install certain extra packages in ExTiX, for example Nvidia’s proprietary graphics driver. You can download “my” kernel 4.15.2-exton if you want to use it in another Debian/Ubuntu system.
NEWS about ExTiX 18.2 Deepin 180206
I’ve released a new version of ExTIX 18.2 Deepin today with Calamares 3.1.9 installed from source and kernel 4.15.1-x86_64-exton. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. All packages have been updated to the latest available version as of today. Study all installed packages in ExTiX Deepin Build 180206.
About ExTiX 18.2 with the Deepin 15.5 Desktop
I’ve made a new extra version of ExTiX with Deepin 15.5 Desktop (made in China!). Deepin is devoted to providing a beautiful, easy to use, safe and reliable system for global users. Only a minimum of packages are installed in ExTiX Deepin. You can of course install all packages you want. Even while running ExTiX Deepin live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Deepin.
All five ExTiX systems are based on Ubuntu and Debian.
The Ultimate Linux System
I’ve called my different versions of ExTiX The Ultimate Linux System for many years by now. As regards ExTiX 18.2 Deepin I feel it’s especially justified. Everything just works.
My special kernel 4.15.1-x86_64-exton corresponding Kernel.org’s latest kernel 4.15.1, released 180203.
What’s new in Linux kernel 4.15?
1. ExTiX Deepin 15.5 Desktop – running in VirtualBox
2. ExTiX Deepin running Refracta snapshot
3. ExTiX Deepin running in VirtualBox – changing Grub packages
4. Calamares 3.1.9 running in ExTiX 18.2
5. ExTiX Deepin running the Refracta Installer
6. ExTiX Deepin login screen (LightDM)
7. Showing many installed programs
Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!
about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!
NEWS 180202 about AndEX Oreo 8.1
My first build of AndEX Oreo 8.1 is from 180103. My new build of Android x86_64 – andex_x86_64-oreo-8.1-gapps-windows-launchers-1060mb-180202.iso can be installed (manually) to hard drive or on a USB stick. You can also run the system live. I.e. from a DVD or a USB stick. On some computers you’ll have to start up AndEX 8.1 in compatibility mode (VESA) though. NOTE: You can run AndEX Oreo Build 180202 on newer laptops and Desktop computers. The sound and video performance is generally very very good.
MOST IMPORTANT CHANGES IN BUILD 180202
Google Play Store now works as intended. As an alternative you can use Aptoide App Manager. Three nice special window launchers are pre-installed: Win 10 Launcher, Microsoft Launcher and OO Launcher. (OO Launcher is an enhanced Android™ O Oreo™ style launcher, with many useful enhanced launcher features). I’ve discovered a new way to manually install AndEX Oreo to hard drive. Very simple! Read more about it at andex.exton.net.
Screenshot – AndEX Build 180202 – the Desktop with Win 10 Launcher for Android 8.1 Oreo – with several extra apps (games) – Koi Video Live Wallpaper, Air Fighters, Popcorn Time, Wild Hunt, Racing In Car 2, Drift Clash and Fishing Club 3D – not pre-installed.
MORE NEWS 180202: AndEX – Oreo 8.1 with kernel 4.9.54-exton-android-x86_64 and GAPPS
My new build of Android-x86_64 Oreo 8.1 have GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google Play Games, Gmail and YouTube. Also many other apps. For example: Spotify, File Manager, Firefox, Root Explorer and Clash of Clans.
ABOUT AndEX Oreo
My compiled Android-x86_64 system (Oreo 8.1) can run and be installed on almost all newer laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. You can (of course) also run AndEX in VirtualBox and/or VMware. Unfortunately only live though. I can also mention that I could run my new Oreo version without problems on a HP Pavilion 500-317no Desktop Computer. You can only do a manual installation to hard drive. That can, however, even be done to a drive where you already have another Linux system (for example Ubuntu 17.10) installed. Read more at andex.exton.net about how to do a very simple manual installation of AndEX Oreo 8.1.
Screenshot 1 – AndEX Oreo 8.1 Desktop with Win 10 Launcher 1
Screenshot 2 – AndEX Oreo 8.1 Desktop with Win 10 Launcher 2
Screenshot 3 – AndEX Oreo 8.1 Desktop with Microsoft Launcher
Screenshot 4 – AndEX Oreo 8.1 Desktop with OO Launcher
Screenshot 5 – AndEX Oreo 8.1 running in VMware
NEWS 180103 about AndEX Oreo 8.1
My new build of Android x86_64 – andex-x86_64-oreo-8.1-gapps-aptoide-windows-1280mb-180103.iso can be installed to hard drive or on a USB stick. You can also run the system live. I.e. from a DVD or a USB stick. On some computers you’ll have to start up AndEX 8.1 in compatibility mode (VESA) though. NOTE: You can run AndEX Oreo Build 180103 on newer laptops and Desktop computers. The sound and video performance is generally very very good.
Google Play Store doesn’t work in AndEX Oreo 8.1 because you can’t sign in to Google. Aptoide App Manager is a good replacement though, since Google Play Services work. I.e. you can install Google apps via Aptoide. If you want to install AndEX Oreo 8.1 to hard drive you’ll have to do it manually. Please read my INSTRUCTION.
Screenshot – AndEX Build 180103 – the Desktop with Win 10 Launcher for Android 8.1 Oreo
MORE NEWS 180103: AndEX – Oreo 8.1 with kernel 4.9.54-exton-android-x86_64 and GAPPS
My new build of Android-x86_64 Oreo 8.1 have GAPPS pre-installed. I.e. Google Play Services, Google Play Store 8.5.39.W-all, Aptoide App Manager 8.6.02, Google Play Games, Gmail and YouTube 12.45.56. Also many other apps. For example: Spotify 188.8.131.523, File Manager 184.108.40.206, Firefox 57.0.1, Google Chrome 63.0.32, Clash of Clans 9.434.4 and Popcorn Time 220.127.116.11.
Android Oreo 8.1 was released 171205.
What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.Also: In AndEX Oreo Build 180103 almost all apps and games can be installed NOT via Google Play Store, but via Aptoide App Manager. You can even install very big games (of 1GB or so), but unfortunately almost all such games need a touchscreen. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.
Screenshot 1 – AndEX Oreo 8.1 Desktop with Win 10 Launcher
Screenshot 2 – AndEX Oreo 8.1 Desktop with Microsoft Launcher
Screenshot 3 – AndEX Oreo 8.1 – Aptoide App Manager running
Screenshot 4 – AndEX Oreo 8.1 – Boot animation
Screenshot 5 – AndEX Oreo 8.1 – Desktop with Win 10 Launcher
Screenshot 6 – AndEX Oreo 8.1 – AndEX Oreo running Google Maps
Screenshot 7 – AndEX Oreo 8.1 – AndEX Oreo first screen after boot – choose launcher
Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD/USB, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.
New features in version 171223 of SlackEX
I have replaced kernel 4.12.9-x86_64-exton with kernel 4.14.8-x86_64-efi-exton with support for “everything”. Kernel 4.14.8 was released 171220. KDE is upgraded to version 4.14.38 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.2.4 (latest, not in Slackware’s repositories), Google Chrome 63.0.3239.108 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), SMPlayer 17.11.2, GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 57.0.2, Thunderbird 52.5.0, Samba 4.7.3 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.
Screenshot 1 – KDE 4.14.38 Desktop with Netflix running
Screenshot 2 – KDE 4.14.38 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia settings and GSlapt running
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox
Screenshot 6 – SMPlayer running
The end of the road…
I will end my SlackEX project now. It’s not needed anymore (if it ever was). Alienbob’s Slackware systems are built with liveslak scripts. Anyone can use the scripts. No special knowledge of Slackware (or Linux) is needed. A lot of different Slackware systems (built with liveslak) can be downloaded. They can all be installed to hard drive using a script called setup2hd. They can also be transferred to a USB stick using a script called iso2usb.sh.
READ MORE about SlackEX….
NEWS 171023 about DebEX KDE Plasma – a Refracta Build 171023
I have made a new version of DebEX KDE Plasma Live DVD. It replaces version 161001. It’s a pure Debian 10 system. (Buster/Sid). I.e.: There are no Ubuntu or Kubuntu elements involved. DebEX KDE Plasma uses KDE 4.16 and KDE Plasma Desktop 5:37 as Desktop environment. It uses kernel 4.13.0-16-exton – (4.13.4). I have installed Nvidia’s proprietary graphic driver 384.90. I have replaced Google Chrome with Firefox 56.0 (for Netflix). I’ve also added SMPlayer – an alternative to Vlc. (SMPlayer is a free media player for Windows and Linux with built-in codecs that can play virtually all video and audio formats. It doesn’t need any external codecs. Just install SMPlayer and you’ll be able to play all formats without the hassle to find and install codec packs). All other installed packages have also been updated to the latest version of 171023. Study the full package list.
What’s new in kernel 4.13?
Important about Refracta
You can use the Refracta tools (pre-installed) to create your own installable Debian Live DVD once you have installed DebEX KDE to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian 10/9 system while running DebEX from a DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 30 min! You’ll find the ISO in /home/snapshots.
1. The KDE Plasma Desktop in version 171023
2. The KDE Desktop with Netflix running
3. DebEX KDE running in VMware
4. DebEX KDE running in VirtualBox
5. Installation in VirtualBox – error to ignore
6. DebEX KDE running in VMware
7. YouTube running in DebEX KDE
NEWS 170923 – AndEX 64bit – Marshmallow 6.0.1 with GAPPS and Netflix (!) working
My build of Android-x86_64 Marshmallow 6.0.1 has GAPPS pre-installed. I.e. Google Play Services 11.5.09, Google Play Store 8.1.29.S-all, Google Chrome 60.0.3112.116, Gmail 7.9.10 and more apps. For example: Netflix 4.16.1, Spotify 18.104.22.1685, Firefox 55.0.2, Aptoide App Manager 22.214.171.124, Termux 0.53 and Clash of Clans 9.105.10. The ISO is called android_x86_64-marshmallow-6.0.1-gapps-netflix-970mb-170923.iso. AndEX Marshmallow 64bit Build 170923 is totally error-free (as far as I know). Everything just works! About Google Play Services – read below and see this slideshow.
Google Play Services
When you start up AndEX Marshmallow Build 170923 for the first time you will get an error message saying that “Google Play Services has stopped”. (As in my previous builds of AndEX). This is easily fixed by going to Settings – Apps – Google Play Services. Give Google Play Services ALL permissions. After that you won’t see any more error messages.
About running Netflix
Before you start Netflix you should go to Settings >> Apps compatibility >> Enable native Bridge. Watch this screenshot. (I’m not sure if this is absolutely necessary, but…). When a movie in Netflix starts the audio will be in Spanish. Change it to English, French or German. Watch this screenshot. Note: When running AndEX Marshmallow live (i.e. from a DVD or USB stick or live in VirtualBox or VMware) it can happen that you get an error message when you try to start Netflix. Just try again and/or wait a few minutes. When running AndEX from hard drive Netflix starts immediately when you want. Note also: Whatever you do don’t try to upgrade Netflix. No other version than the one pre-installed will work.
What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX Marshmallow Build 170923 almost all apps and games can be installed via Google Play Store. Note also that Netflix works very well in this AndEX Build. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.
Version 170923 replaces version 160922.
AndEX Marshmallow’s Desktop with some extra apps (Kodi 17.4 and YouTube)
AndEX Marshmallow running Netflix in VMware
AndEX Marshmallow running Google Play Store
AndEX Marshmallow running Aptoide App Manager
AndEX Marshmallow running Kodi
AndEX root session
AndEX Marshmallow running the famous game Clash of Clans (pre-installed)
AndEX Marshmallow running Spotify
NEWS 20170309 ABOUT exGENT
I’ve made yet a new version (20170309) of exGENT based on Gentoo Linux. It uses Xfce 4.12.1 and kernel 4.9.12. It is for the 64 bit architecture. I call it exGENT 2017 Xfce4 Live DVD. It replaces version 20170303. The ISO file is of 2670 MB due to the fact that this version has a lot of packages pre-installed. Despite this exGENT version 170309 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 170309.
What’s new in exGENT Build 170309?
The boot loader Grub Legacy has been replaced by Grub2. I started this build in the hope that I should be able to implement a new independent installer program called Calamares. I wasn’t able to do it now though. (Many dependencies to satisfy). My old installer script will have to do until I find a solution. Anyway, I think exGENT Build 170309 can be of interest because of the change to Grub2 and the fact that it has one of the newest kernels installed. MOST IMPORTANT: In versions before this one (170309) the file system wasn’t writable when running exGENT live (from DVD). Now you can emerge (install) new programs/packages even while running the system from a DVD or USB stick. If you do that and later decide to install exGENT to hard drive all your changes will follow! Furthermore you can install/transfer exGENT to a USB stick with the dd command in Linux or use Etcher and Rufus in Windows. Watch a screenshot when Etcher is running. Such installations were impossible before.
My special kernel 4.9.12-aufs-gentoo-exton corresponding Kernel.org’s kernel 4.9.12.
exGENT running Nvidia config
exGENT running Brasero
About Linux For All (LFA)
The system is based on Ubuntu 16.10, codenamed Yakkety Yak and Debian testing (Stretch – upcoming Debian 9). It’s a total rebuild. I.e. nothing is left of the old LFA system. All installed packages have been updated to the latest version as of 161114. Kernel 4.4.0-19-exton is replaced by kernel 4.8.0-27-exton. (4.8.0-27 is the latest Ubuntu kernel). You can download “my” kernel if you want to use it in another Ubuntu/Debian system. I have also installed Nvidia’s proprietary graphics driver 370.28. Most important: I have included Refracta Tools so you can create your own Linux For All/Ubuntu live installable system!
The system language is ENGLISH.
More news about LFA build 161114
One of my previous versions of LFA (build 141120) had four (4) Desktop environments installed. Namely Unity (Ubuntu), LXDE, Razor-qt and XBMC. LFA build 161114 uses only Fluxbox as Window Manager and Cairo-Dock as Desktop Interface. Cairo-Dock is designed to be light, fast and customizable, and is desktop-agnostic. It has a powerful DBus interface, to be controlled from a terminal or another application. Features can be added by plug-ins or applets, and applets can be written in C or in any language. About Fluxbox: Fluxbox is a Window Manager for X that was based on the Blackbox 0.61.1 code. It is very light on resources and easy to handle but yet full of features to make an easy, and extremely fast, desktop experience. So who needs KDE or Gnome?
Screenshot 1: LFA’s new Desktop
Screenshot 2: Refracta Installer running
Screenshot 3: Refracta Tools running
Important about Refracta
You can use the Refracta Tools (pre-installed in LFA Build 161114) to create your own installable Ubuntu Live DVD once you have installed LFA to hard drive. I mean change everything and then create a whole new Ubuntu 16.10 live system. When you start Refracta it will look like this. You don’t even have to install LFA to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu live installable system while running LFA from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min! You can then install VirtualBox in LFA so you can test run your own created new Ubuntu ISO. Or do it in Windows. By the way: You can do the whole thing in VirtualBox. I mean install LFA in VirtualBox, change everything, create a new Ubuntu 16.10 system using Refracta tools and transfer your new ISO to your server using FileZilla, which is pre-installed.
NEWS 161025 about DebEX Xfce4 – a Refracta Build
A new version of DebEX Barebone with Xfce 4.12.1 and kernel 4.8.0-21-exton (equivalent to Kernel.org’s stable kernel 4.8) is ready. I have installed Nvidia’s proprietary graphics driver 370.28 in this new version of DebEX Barebone. Read about how to use it. All packages have been updated to the latest version as of October 25, 2016. DebEX Barebone is now based on Debian testing – Stretch – (upcoming Debian 9) and Debian unstable – Sid. I have replaced Google Chrome with Tor Browser – it prevents somebody watching your Internet connection from learning what sites you visit, it prevents the sites you visit from learning your physical location, and it lets you access sites which are blocked. Announcement about Xfce 4.12, released 150228: Today, after 2 years and 10 months of work, we are pleased to announce the release of the Xfce desktop 4.12, a new stable version that supersedes Xfce 4.10. This long period can only be explained by how awesome Xfce 4.10 was. But as all things, it needed some refreshing – and for that we saw lots of new contributors providing valuable feedback, features and bugfixes. As always, Xfce follows its steady pace of evolution without revolution that seems to match our users’ needs.
Important about Refracta
You can use the Refracta tools (pre-installed in DebEX Xfce4) to create your own installable Debian Stretch Live DVD once you have installed DebEX Xfce4 to hard drive. I mean change everything and then create a whole new Debian Stretch live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian 9 system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min! I have also pre-installed VirtualBox in DebEX Xfce4 so you can test run your own created new Debian Stretch ISO.
New installed packages
I have added VirtualBox, Midori Private Browser, SMPlayer, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages.
Screenshot of the Boot menu in DebEX Xfce4 created with the Refracta tools
Screenshot of the Xfce4 Desktop in DebEX Barebone Xfce4 Build 161025