Tag: VNC4Server

RaspEX Rpi4 – Build 210109 based on Ubuntu 20.04 LTS – with OpenCPN 5.2.4 (navigation software)

raspex-16.04-opencpn-4.4.0-touchscreen-20160702-smallRaspEX Rpi4 – Build 210109 based on Ubuntu 20.04 Focal Fossa LTS (supported until April, 2025) – with OpenCPN 5.2.4 (latest stable version released 201018) – especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

REPLACEMENT
This build (210109) replaces build 190812. Ubuntu has been upgraded to version 20.04 and OpenCPN to version 5.2.4 – latest stable version. Build 210109 is made especially for the new Raspberry Pi 4, but can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and a Raspberry Pi 2 Model B.

The Desktop environment LXDE is used. The “Lightweight X11 Desktop Environment” is an extremely fast-performing and energy-saving desktop environment. LXDE uses less CPU and less RAM than other environments. It is especially designed for cloud computers with low hardware specifications, such as netbooks, mobile devices (e.g. MIDs) or older computers.

ABOUT RaspEX Build 210109
RaspEX is a Linux ARM system for Raspberry Pi 4, Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Buster (Debian 10), Focal Fossa (Ubuntu 20.04) and Linaro (Open Source software for ARM SoCs). In this new version (210109) I’ve installed OpenCPN 5.2.4.

Read this OpenCPN Review….

SCREENSHOTS
1. RaspEX Build 210109 using Bluetooth
2. RaspEX version 190812 running OpenCPN as the ordinary user raspex
3. RaspEX version 190812 running OpenCPN as root
4. OpenCPN 4.4.0 runningon the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
5. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
6. OpenCPN New York – Approaches to New York (old version of OpenCPN)

7. OpenCPN Stockholm Archipelago (old version of OpenCPN)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

RaspEX especially for Raspberry Pi 3 Model B+ – based on Ubuntu 18.04 LTS – with OpenCPN 4.8.8 pre-installed ::: Build 181120

raspex-16.04-opencpn-4.4.0-touchscreen-20160702-smallRaspEX – Build 181120 based on Ubuntu 18.04 LTS – with OpenCPN 4.8.8 (latest stable version released 181107) – especially made for the new Raspberry Pi 3 Model B+, but it can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

Replacement
This build (181120) replaces build 180331. Ubuntu has been upgraded to version 18.04 LTS and OpenCPN to version 4.8.8 – latest stable version released 181107. RaspEX Build 181120 is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

ABOUT RaspEX Build 181120
RaspEX is a Linux ARM system for Raspberry Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Stretch (Debian 9), Bionic Beaver (Ubuntu 18.04 LTS) and Linaro (Open Source software for ARM SoCs). In this new version (181120) I’ve installed OpenCPN 4.8.8 from source.

Read this OpenCPN Review….

Kernel
Kernel 4.14.80-v7 is used.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer

SSH, Samba and VNC4Server are pre-installed in RaspEX Build 181120. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 3/2 from Windows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

The 7″ Touchscreen Monitor for Raspberry Pi
To my great joy also this version of RaspEX work together with the 7″ Touchscreen Monitor for Raspberry Pi “out of the box”.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Stretch) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. RaspEX Build 181022, 181010 (with BunsenLabs Desktop) and 181120 (current with OpenCPN) are of course even faster, especially if you run the systems on a Raspberry Pi 3 Model B+ computer.

SCREENSHOTS
1. RaspEX version 181120 running OpenCPN as the ordinary user raspex
2. RaspEX version 181120 running OpenCPN as root
3. OpenCPN 4.4.0 running on the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
4. OpenCPN 4.4.0 – Boston (old version OpenCPN)
5. OpenCPN World Map (old version of OpenCPN)
6. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
7. OpenCPN New York – Approaches to New York (old version of OpenCPN)
8. OpenCPN Stockholm Archipelago (old version of OpenCPN)

READ MORE….

Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonExton Linux SystemsLinuxRaspberry Pi

RaspEX for Raspberry Pi 3/2 – Build 170810 – based on Ubuntu 17.04 with LXDE and kernel 4.9.41-exton-v7+

NEWS 170810 about RaspEX for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.4.49 with “my own” compiled kernel 4.9.41-exton-v7+. RaspEX Build 170810 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian 9, Ubuntu 17.04 and Linaro (Open Source software for ARM SoCs). In this new version (170810) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 170810.

Compatibility :: August 2017

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Lollipop, RaspAnd Marshmallow, RaspAnd Nougat 7.1.1, RaspAnd 7.1.2 and RaspArch. I have now (170810) upgraded all systems. Read about the new Raspberry Pi 3

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Screenshot 4 – RaspEX running Blueman (Bluetooth Manager)

Kernel
Kernel 4.9.41-exton-v7 is used.

How do I install RaspEX in Windows?
Just like any other Raspberry Pi system. I.e.: Unpack the downloaded ZIP file (raspex-ubuntu-17.04-lxde-1190mb-170810.zip) and transfer the IMAGE file (raspex-ubuntu-17.04-lxde-3050mb-170810.img) to your Micro SD card of at least 8GB. For that you shall use Win32DiskImager in Windows.

SCREENSHOTS

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC-viewer

Screenshot 4 – RaspEX running Midori Private Browser

Screenshot 5 – RaspEX using Pavucontrol (for sound)

Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

Screenshot 7 – RaspEX running the Bluetooth Manager

Screenshot 8 – The Desktop 170810

READ MORE…

1 Comment extonExton Linux SystemsLinuxRaspberry

RaspEX for Raspberry Pi 3/2 – Build 161019 – based on Ubuntu 16.10 with LXDE and kernel 4.4.21

raspberry-logoNEWS 161019 about RaspEX LXDE for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.1.20 with kernel 4.4.21. RaspEX Build 161019 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.6), Ubuntu Yakkety Yak (Ubuntu 16.10, released 161013) and Linaro (Open Source software for ARM SoCs). In this new version (161019) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 161019.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compatibility :: October 2016

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX with LXDE, RaspEX with Kodi, RaspEX with OpenCPN, RaspAnd Marshmallow, RaspAnd Lollipop and RaspArch. I have now (161019) upgraded all systems. Read about the new Raspberry Pi 3…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry Pi on “steroids“. RaspEX Build 161019 and 160426 are (of course) even faster, especially if you run the systems on a Raspberry Pi 3 computer.

SCREENSHOTS
Screenshot 1 – RaspEX connected to Windows via Samba
Screenshot 2 – RaspEX connected to Windows via PuTTy
Screenshot 3 – RaspEX “running on” Windows with VNC-viewer
Screenshot 4 – RaspEX running Midori Private Browser
Screenshot 5 – RaspEX using Pavucontrol (for sound)
Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

READ MORE…

No Comments extonLinuxRaspberry

RaspEX Build 160402: Now with Kodi (XBMC) Media Center, Bluetooth, Samba, SSH and VNC4Server

raspberry-logoNEWS 160402
I discovered to my horror that Build 160331 of RaspEX didn’t have support for YouTube in Kodi. Many Add-ons (extensions) in Kodi are dependent on the YouTube Add-on. I therefore (of course) had to correct this error and upload a new version (160402) of RaspEX. While I was at it I took the opportunity to install some additional popular Music, Video and Picture Add-ons.

NEWS 160331: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
I have upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

NEWS 160402 ABOUT RaspEX
My previous version of RaspEX is from 160307. I have now upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop. RaspEX Build 160331 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160402) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

How do I run Kodi?
You can just start Kodi from the menu while in the LXDE Desktop environment as the ordinary user raspex or as root. Then you can just start adding video and music Add-ons. I suggest that you also add a “Superrepo” – http://srp.nu. Please note that I have already installed some popular Add-ons in Build 160402.

View all installed packages in RaspEX – Build 160402

Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

Screenshots showing additional popular Music, Video and Picture Add-ons in Kodi Media Center.

READ MORE…

2 Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 160307 – for the new Raspberry Pi 3

raspberry-logoNEWS 160307: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. RaspEX Build 160307 with a new kernel runs very well on Raspberry Pi 3. You can (of course) also run the new RaspEX system on a “old” Raspberry Pi 2.

NEWS 160307 ABOUT RaspEX

My first version of RaspEX is from 150318, my second from 150706 and my third one from 151027. I have now upgraded the whole system and replaced the old kernel. RaspEX Build 160307 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160307) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Softpedia review
RaspEX version 151001 was reviewed by Softpedia 151001.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry on “steroids“. RaspEX Build 160307 is (of course) even faster, especially if you run the system on a Raspberry Pi 3 computer.

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151027 based on Ubuntu 15.10 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151027 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151027) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

View all installed packages in RaspEX – Build 151027

View RaspEX new Desktop 151027

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX – Build 151001 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151001 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (151001) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client).

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Samba and VNC4Server to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer
SSH, Samba and VNC4Server are pre-installed in RaspEX Build 151001. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 2 from Windows the way the below slideshow shows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

Watch this slideshow re. connections between RaspEX and Windows.

READ MORE….

No Comments Exton Linux SystemsLinuxRaspberry