Tag: SlackEX

SlackEX Current (Slackware 15.0 BETA) 64 bit Live DVD with LXQt ::: Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot ::: Build 210501

01
May
2021

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt. (Only in the Enlightenment version though).

NEWS ABOUT SlackEX 15.0 BETA with LXQt
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0 BETA. This time with LXQt as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt packages following the instructions at Gitlab.com. If you already have Slackware/SlackEX installed to hard drive you can do the same. It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 210501 is a live remaster of Slackware 15.0 BETA. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Two kernels are included in Build 210501. While running SlackEX live (from a DVD or USB stick) kernel 5.9.6-exton will be used. After a hard drive installation kernel 5.10.32-exton will be used. Kernel 5.10.32 is a long term release (LTS). To be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5.9.6-exton.

NEW features in version 210501 of SlackEX
Kernel 5.9.6-exton is kept so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own Slackware 15.0 system. Read more about Refracta at the INFO site. LXQt is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Log in to LXQt as the ordinary user user with password live or as root with password root. While running SlackEX LXQt in VirtualBox you can do so in full screen since VirtualBox Guest Additions are pre-installed (as regards both kernels). Watch this screenshot.

Study all pre-installed packages in Build 210501…

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Snapshot has started
Screenshot 2 – user’s Desktop
Screenshot 3 – Showing a Samba connection

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX Current (Slackware 15.0 BETA) 64 bit Live DVD ::: Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot ::: Build 210422

22
Apr
2021

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt. (Only in the Enlightenment version).

NEWS ABOUT SlackEX 15.0 BETA with Xfce4
Slackware is not dead even though not much has happen since Slackware 14.2 was released in July 2016. The main differences of Slackware 15 are booked to updating the versions of programs, including the transition to the Linux 5.10 kernel, a set of GCC compilers 10.3 and the system library glibc 2.33. SlackEX Build 210422 is a live remaster of Slackware 15.0 BETA. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Two kernels are included in Build 210422. While running SlackEX live (from a DVD or USB stick) kernel 5.9.1-exton will be used. After a hard drive installation kernel 5.11.14-exton will be used. To be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5.9.1-exton.

Study all pre-installed packages in Build 210422…

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Installer has started – Xfce4
Screenshot 2 – user’s Desktop – Xfce4
Screenshot 3 – Refracta Snapshot has started in VirtualBox – Xfce4
Screenshot 4 – SlackEX running in VirtualBox when Guest additions have been installed – Xfce4

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX (Slackware) live with Enlightenment 0.24.2 (latest version), kernel 5.9.6-exton and Refracta Snapshot (create your own Slackware distro) :: Build 201112

12
Nov
2020

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

NEWS ABOUT SlackEX Build 201112 with the Enlightenment 0.24.2 Desktop
A new extra version of SlackEX is ready. In this version I’ve replaced Xfce4 with Enlightenment 0.24.2 – latest version. I’ve also replaced kernel 5.9.1-exton with kernel is 5.9.6-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.24.2 I followed the instructions here. The whole thing was very time consuming since a lot of dependencies had to be satisfied. All other packages from SlackEX Build 201105 remain. Most important Refracta Snapshot so you can build your own Slackware distro with Enlightenment 0.24.2. Study the full package LIST. Read about Enlightenment 0.24.2 features.

Screenshots
Screenshot 1 – Root’s Desktop – Enlightenment 0.24.2
Screenshot 2 – Live’s Desktop – Enlightenment 0.24.2
Screenshot 3 – Root’s Desktop when running in full screen in VMware Player – KDE (not pre-installed)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
1 Comment extonExton Linux Systems

SlackEX 14.2 64bit – Build 191007 – with Refracta Snapshot (so that you can create your very own live installable Slackware system)

08
Oct
2019

About SlackEX 14.2, 64 bit, Build 191007

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 191007 of SlackEX
I have replaced kernel 4.14.8-x86_64-efi-exton with kernel 5.3.0-exton so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own live installable Slackware system. Read more about Refracta below. Xfce 4 is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better.

Watch Refracta Snapshot in action below.


Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Installer has started
Screenshot 2 – live’s Desktop with GSlapt running
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Boot screen when running live
Screenshot 5 – Boot screen when running from hard drive
Screenshot 6 – SlackEX running from hard drive in VMware Workstation 15 Player when VMware Tools have been installed

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

No Comments extonExton Linux SystemsLinux

SlackEX Build 171223 (Slackware 14.2) live dvd/usb with KDE 4.14.38, kernel 4.14.8-x86_64-efi-exton, Nvidia 384.98 and VirtualBox 5.2.4

23
Dec
2017

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD/USB, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 171223 of SlackEX
I have replaced kernel 4.12.9-x86_64-exton with kernel 4.14.8-x86_64-efi-exton with support for “everything”. Kernel 4.14.8 was released 171220. KDE is upgraded to version 4.14.38 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.2.4 (latest, not in Slackware’s repositories), Google Chrome 63.0.3239.108 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), SMPlayer 17.11.2, GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 57.0.2, Thunderbird 52.5.0, Samba 4.7.3 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

SCREENSHOTS
Screenshot 1 – KDE 4.14.38 Desktop with Netflix running
Screenshot 2 – KDE 4.14.38 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia settings and GSlapt running
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox
Screenshot 6 – SMPlayer running

The end of the road…
I will end my SlackEX project now. It’s not needed anymore (if it ever was). Alienbob’s Slackware systems are built with liveslak scripts. Anyone can use the scripts. No special knowledge of Slackware (or Linux) is needed. A lot of different Slackware systems (built with liveslak) can be downloaded. They can all be installed to hard drive using a script called setup2hd. They can also be transferred to a USB stick using a script called iso2usb.sh.

READ MORE about SlackEX….

2 Comments Exton Linux SystemsLinux

Run your Slackware system with the latest available kernel – 4.14.2!

25
Nov
2017

SlackwareNEWS 171125
Kernel 4.14.2-x86_64-exton is my newest Slackware kernel. Kernel 4.14.2 was released by Kernel.org yesterday. (November 24, 2017).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.14.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.14.2 is the latest kernel available from Kernel.org. Released 20171124.

What’s new in kernel 4.14?

READ MORE….

No Comments extonLinux

Run your Slackware system with the latest available kernel – 4.13.2!

14
Sep
2017

SlackwareNEWS 170914
Kernel 4.13.2-x86_64-exton is my newest Slackware kernel. Kernel 4.13.2 was released by Kernel.org yesterday. (September 13, 2017).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.13.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.13.2 is the latest kernel available from Kernel.org. Released 20170913.

What’s new in kernel 4.13?

READ MORE…

No Comments extonLinux

SlackEX Build 170831 (Slackware 14.2) live dvd with KDE 4.14.35, kernel 4.12.9-x86_64-exton, Google Chrome 60.0.3112 and VirtualBox 5.1.26

31
Aug
2017

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 170831 of SlackEX
I have replaced kernel 4.10.2-x86_64-exton with kernel 4.12.9-x86_64-exton with support for “everything”. Most important is that I have changed repositories from Slackware 14.1 to Current. I.e. Slackware 14.2. KDE is upgraded to version 4.14.35 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.1.26 (latest, not in Slackware’s repositories), Google Chrome 60.0.3112 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 55.0.3, Thunderbird 52.3.0, Samba 4.6.7 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

SCREENSHOTS
Screenshot 1 – KDE 4.14.35 Desktop with Netflix running
Screenshot 2 – KDE 4.14.35 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia configuration
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox

READ MORE….

No Comments extonExton Linux SystemsLinux

Run your Slackware installation with the latest kernel – 4.13-rc2!

25
Jul
2017

NEWS 170725
Kernel 4.13-rc2-x86_64-exton is my newest Slackware kernel. Kernel 4.13-rc2 was released by Kernel.org on July 23, 2017.

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.13-rc2-x86_64-exton has even more support for new hardware, etc. Kernel 4.13-rc2 is the latest kernel available from Kernel.org. Released 20170723.

What’s new in kernel 4.13?

READ MORE…

No Comments extonLinux
1 2 3 4