Tag: Refracta snapshot

ExTiX 19.1, Build 181228, with KDE 4.17, Kodi 18 “Leia”, Calamares, Refracta Tools, Nvidia and kernel 4.20.0-exton

28
Dec
2018

ExTiX 19.1 – Build 181228
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 19.1 KDE/Kodi Live DVD. (The previous KDE version was 18.6 from 180602). The best thing with ExTiX 19.1 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! As an alternative to KDE you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the KDE Desktop as the ordinary user extix. I have enabled a few addons in Kodi. Most important the Netflix addon.

ABOUT
ExTiX 19.1 KDE DVD 64 bit is based on Debian 9 and Ubuntu 18.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed KDE Frameworks 5.44.0 with KDE 4.17. KDE Frameworks are 60 addon libraries to Qt which provide a wide variety of commonly needed functionality in mature, peer reviewed and well tested libraries with friendly licensing terms.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.20.0-exton.

What’s new in Linux kernel 4.20?

WHAT’S SO SPECIAL about ExTiX and especially the new version from 181228?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. ExTiX KDE is now more stable than ever. All packages have been upgraded to the latest version by 181228.
4. I’ve replaced kernel 4.15.0-23-exton with kernel 4.20.0-exton. Latest by 181228.
5. I have replaced Ubuntu’s installation program Ubiquity (live installer) with Calamares. You can also (still) use Refracta Installer. They work very well. I.e. a new user (your user) will be created during the installation process and you’ll get a chance to change root’s password. Just start any of the installers from the menu under System.
6. The best thing with ExTiX 19.1 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system.
7. As an alternative to KDE you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the KDE Desktop as the ordinary user extix. I have enabled a few addons in Kodi. Most important the Netflix addon.
8. Nvidia proprietary Graphics driver 410.78 (patched for kernel 4.20) is pre-installed in ExTiX 19.1.

SCREENSHOTS
Screenshot 1 of ExTiX 19.1 Desktop – logged in as the ordinary user extix
Screenshot 2 of ExTiX 19.1 Desktop – logged in as root (superuser)
Screenshot 3 of ExTiX 19.1 – showing enabled addons in Kodi 18
Screenshot 4 of ExTiX 19.1 – Netflix running in Kodi 18

READ MORE…

No Comments extonExton Linux SystemsLinux

ExTiX 19.0 with Deepin 15.5 Desktop, Refracta snapshot, Calamares 3.2.2 Installer, Kodi 18.0 and kernel 4.20.0-rc4-exton – Build 181208

08
Dec
2018

NEWS 181208 ABOUT ExTiX Deepin 19.0
I’ve released a new version of ExTiX Deepin today with Calamares 3.2.2 and kernel 4.20.0-rc4-exton. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. All packages have been updated to the latest available version as of today. Study all installed packages in ExTiX Deepin Build 181208. ExTiX is based on Debian and Ubuntu 18.10.

About ExTiX 19.0 with the Deepin 15.5 Desktop
I’ve made a new extra version of ExTiX with Deepin 15.5 Desktop (made in China!). Deepin is devoted to providing a beautiful, easy to use, safe and reliable system for global users. Only a minimum of packages are installed in ExTiX Deepin. You can of course install all packages you want. Even while running ExTiX Deepin live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Deepin. Note that also Kodi 18 RC2 Leia is pre-installed with some video add-ons. Kodi (formerly XBMC) is a free and open-sourcemedia player software application developed by the XBMC Foundation. It allows users to play and view most streaming media, such as videos, music, podcasts, and videos from the Internet, as well as all common digital media files from local and network storage media – cite from Wikipedia.

ABOUT ExTiX
All five ExTiX systems are based on Ubuntu and Debian.

The Ultimate Linux System
I’ve called my different versions of ExTiX The Ultimate Linux System for many years by now. As regards ExTiX 19.0 Deepin I feel it’s especially justified. Everything just works.

Refracta Tools
While running ExTiX Deepin 19.0 live or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

Used KERNEL
My special kernel 4.20.0-rc4-exton corresponding Kernel.org’s kernel 4.20-rc4.

What’s new in Linux kernel 4.20?

Why two versions of ExTiX Deepin?
The thing is that the packages grub-pc and grub-efi-amd64 can’t be installed at the same time. To be able to use Calamares Installer on non-efi computers grub-pc has to be installed. ExTiX Deepin 18.8 Build 180815 is for non UEFI-enabled computers.

SCREENSHOTS
1. ExTiX Deepin 15.5 Desktop
2. ExTiX Deepin being installed in VirtualBox using Refracta Installer
3. ExTiX Deepin (NON-UEFI) Build 180815 being installed in VirtualBox using Calamares Installer
4. ExTiX Deepin running Refracta snapshot
5. ExTiX Deepin running in VMware
6. ExTiX Deepin running the Refracta Installer
6. ExTiX Deepin login screen (LightDM)
8. Movie showing how to enable Window effects
9. A small movie made with Deepin Screen Recorder
10. Kodi 18.0 running in ExTiX 19.0
11. ExTiX boot screen when running live
12. ExTiX boot screen when running from hard drive

Deepin Screen Recorder
In ExTiX Deepin you can record everything you do. Watch this small video. Or a video when I’ve started Calamares Installer.

READ MORE…

No Comments extonExton Linux SystemsLinux

Exton|OS 64 bit – based on Ubuntu 18.04.1 LTS – with Budgie Desktop, Refracta Snapshot, Calamares Installer and kernel 4.20.0-rc1-exton – Build 181109

09
Nov
2018

NEWS 181109 ABOUT Exton|OS with Budgie Desktop 10.4 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.4. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in Build 181109: Refracta Snapshot, Calamares 3.1.12, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 4.20.0-rc1-exton (corresponding Kernel.org‘s latest kernel 4.20-rc1) is used. All packages have been updated to the latest available version as at November 9, 2018. Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 181109
This Exton|OS version is for non-efi computers, which means that you can use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.

WHAT’S NEW in kernel 4.20?

IMPORTANT ABOUT REFRACTA Snapshot
Refracta Snapshot is pre-installed in Exton|OS Build 181109. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 18.04.1 LTS Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 15 – 40 min! You’ll find the ISO in /home/snapshots. (Or change that in /etc/refractasnapshot.conf). The whole thing is very simple.

SCREENSHOTS
Screenshot 1 – Exton|OS’s Budgie live Desktop
Screenshot 2 – Exton|OS’s Budgie root Desktop
Screenshot 3 – Exton|OS’s Budgie Desktop installing Spotify
Screenshot 4 – Exton|OS’s Budgie Desktop running Refracta Snapshot
Screenshot 5 – Exton|OS running in VMware
Screenshot 6 – showing how to add apps to Docky

READ MORE…

No Comments extonExton Linux SystemsLinux

DebEX Gnome 64 bit – non-efi – with Gnome 3.30 (latest), Refracta snapshot, Calamares and kernel 4.19.0-exton – Build 181030

30
Oct
2018

About DebEX
All three systems/distributions are a based on Debian Buster/Sid (upcoming Debian 10). Budgie Desktop 10.4 is used as Desktop environment in DebEX Barebone/Budgie. Gnome 3.30 is used in DebEX Gnome. KDE Plasma Desktop 5:47 is used in DebEX KDE. The system language is English (in all three versions of DebEX).

NEWS 181030 about DebEX Gnome – a Refracta non-efi Build
I have made a new extra version of DebEX, which I call DebEX Gnome Live DVD. It’s a pure Debian system using the testing (buster) and unstable (sid) repositories. Gnome 3.30 (latest) is used as Desktop environment. Gnome in combination with Docky is perfect (I think). Watch this screenshot. I have removed the Mate Desktop, since Gnome now can be used on all kind of computers. Also when running DebEX in VirtualBox and VMware. No need for Nvidia’s proprietary graphics drivers when running this new version of DebEX. You can of course install such drivers if you want to. Furthermore I have replaced Google Chrome with Iceweasel 52.6. It is now possible to watch Netflix movies using Iceweasel (Firefox) in Linux. I have also replaced Refracta Installer with Calamares Installer, which makes it possible to install DebEX Gnome in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. All installed packages have been updated to the latest version as of 181030. DebEX Gnome uses kernel 4.19.0-exton corresponding Kernel.org’s latest kernel 4.19. You can download “my” kernel if you want to use it in another Debian or Ubuntu system.

The LightDM login window in DebEX Gnome

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox.

What’s new in kernel 4.19?

SCREENSHOTS
1. Samba running
2. Calamares has started in VirtualBox
3. Calamares has finished
4. Showing all installed applications
5. Synaptic running

READ MORE…

No Comments extonExton Linux SystemsLinux

ExTiX 18.10 – based on Ubuntu 18.10 “Cosmic Cuttlefish” – with LXQt 0.13.0, Refracta Tools, Calamares Installer and kernel 4.18.12-exton – a non-efi Build 181006

06
Oct
2018

I have made a new extra version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.10 LXQt Live DVD. It is for non-efi computers and VirtualBox/VMware. I.e. you can use the Calamares Installer also in for example VirtualBox and VMware. Which means that you can install ExTiX in any language.

ABOUT
ExTiX 18.10 LXQt DVD 64 bit is based on Debian and upcoming Ubuntu 18.10 Cosmic Cuttlefish (to be released 181018). The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.13.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.18.12-exton corresponding Kernel.org’s latest stable kernel 4.18.12. You can download “my” kernel if you want to use it another Ubuntu/Debian system.

What’s new in kernel 4.18?

WHAT’S SO SPECIAL about ExTiX and especially the new version from 181006?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (Load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. All packages have been upgraded to the latest version by 181006.
4. You can install that you can install Nvidia’s proprietary graphics driver (without problems) if you like.
5. You can install ExTiX to hard drive using Calamares Installer on older non-efi computers (and VirtualBox/VMware). Which means that you can install ExTiX in your preferred language.
6. While running ExTiX LXQt 18.10 live or from hard drive you can use Refracta snapshot (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

THE IMPORTANCE of ExTiX LXQt now being based on Ubuntu 18.10 (UNSTABLE/DEVELOPMENT)
I don’t think it is too important since ExTiX LXQt doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report.

SCREENSHOTS
Screenshot of ExTiX 18.10 root Desktop – LXQt 0.13.0
Screenshot of ExTiX 18.10 live Desktop – LXQt 0.13.0
Calamares running in VMware in ExTiX 18.10
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

1 Comment extonExton Linux SystemsLinux

DebEX Barebone Build 181001 – a non-efi version with Budgie Desktop, Calamares Installer, Refracta Tools and kernel 4.18.11-exton

01
Oct
2018

NEWS 181001 about DebEX Budgie – a Refracta Build
A new version of DebEX Barebone with Budgie Desktop 10.4 and kernel 4.18.11-exton (equivalent to Kernel.org’s latest stable kernel 4.18.11) is ready. You can download “my” kernel and use it in another Debian (or Ubuntu) system if you want. All packages have been updated to the latest version as of October 1, 2018. DebEX Barebone is now based on Debian Buster/Sid (upcoming Debian 10). Most important: The ISO has decreased from 1330 MB to 929 MB, which makes it easier to run the system live from RAM. That ability allows DebEX Budgie to be very fast, since reading and writing data from/to RAM is much faster than on a hard disk drive. This version of DebEX is a non-efi build for older computers. You can use the Calamares 3.2.2-1 Installer Framework to install DebEX Budgie to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers.

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox. Log in to Budgie as user with password live or as root with password root (when running DebEX live).

Important about Refracta
You can use the Refracta tools (pre-installed in all three versions of DebEX) to create your own installable Debian Live DVD once you have installed DebEX to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 50 min! You’ll find the ISO in /home/snapshot.

SCREENSHOTS
Screenshot of the Budgie Desktop when running Netflix
The Budgie Desktop for the normal user user
The Budgie Desktop for root

READ MORE…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!
No Comments extonExton Linux SystemsLinux

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 180928 with Refracta Tools

26
Sep
2018

NEWS 180928 about Raspberry Pi Debian Pixel – 32bit – an Exton Build
My second Debian Pixel Build from is from 170425 . My third build is from 180316. Study all included packages – latest by 180928. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

NEWS 180920 – a YouTube video about Debian Pixel
I’ve discovered a YouTube video about my Debian Pixel Build 170425. The video is called Debian Pixel..Exton forks it for you..
This video is of course also valid for Build 180928. By watching the video you can learn a lot about Debian Pixel’s features.

Most important changes in Build 180928
This build replaces version 161223 , 170425 and 180316 . I’ve upgraded Raspbian/Debian from Jessie to Stretch – Debian stable. I’ve also upgraded the kernel from 3.16.0-4-686-pae to 4.9.0-9-686-pae. I’ve also included kernel 4.9.0-9-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies.

SCREENSHOTS
Screenshot 1 – Spotify running
Screenshot 2 – Samba running (reach your Windows computers in your network)
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Refracta Installer has started in VMware
Screenshot 5 – Wireless connection with NetworkManager and Wicd (installed in Build 170425, 180316 and 180928)
Screenshot 6 – Wifi connection using NetworkManager – in detail

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

ExTiX 18.9 – “The Ultimate Linux System” – with LXQt 0.12.0, Refracta Tools, Calamares Installer and kernel 4.18.5-exton – a non-efi Build 180901

01
Sep
2018

I have made a new extra version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.9 LXQt Live DVD. It is for non-efi computers and VirtualBox/VMware. I.e. you can use the Calamares Installer also in for example VirtualBox and VMware. Which means that you can install ExTiX in any language.

ABOUT
ExTiX 18.9 LXQt DVD 64 bit is based on Debian and Ubuntu 18.04.1 Bionic Beaver. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.12.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.18.5-exton corresponding Kernel.org’s latest stable kernel 4.18.5. You can download “my” kernel if you want to use it another Ubuntu/Debian system.

What’s new in kernel 4.18?

NEWS ABOUT ExTiX 18.9 Build 180901 with the LXQt Desktop environment
1. ExTiX LXQt is based on Ubuntu 18.04.1 Bionic Beaver. LXQt 0.12.0 is used as Desktop environment. All packages have been updated to the latest version by 180901. Kernel 4.18.5-exton is used. (Kernel.org‘s kernel 4.18.5).
2. Firefox has replaced Google Chrome as Web Browser. It’s now possible to watch Netflix movies also in Firefox (while running Linux).
3. I have replaced Ubuntu’s installer Ubiquity with Calamares Installer. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases.
4. Other included important/useful packages are: LibreOffice, Thunderbird, GParted, Brasero, SMPlayer, GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.
5. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
6. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (Load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
7. All packages have been upgraded to the latest version by 180901.
8. You can install Nvidia’s proprietary graphics driver (without problems) if you like.
9. You can install ExTiX to hard drive using Calamares Installer on older non-efi computers (and VirtualBox/VMware). Which means that you can install ExTiX in your preferred language.
10. While running ExTiX LXQt 18.9 live or from hard drive you can use Refracta tools (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

SCREENSHOTS
Screenshot of ExTiX 18.9 Desktop – LXQt 0.12.0
Netflix running in ExTiX 18.9
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonExton Linux SystemsLinux

ExTiX 18.8-2 with Budgie 10.4 Desktop, Refracta Tools and kernel 4.18.0-exton – Build 180819 for older non-efi computers

19
Aug
2018

About ExTiX 18.8-2 with the Budgie Desktop
I’ve made a new extra version of ExTiX with Budgie Desktop. Budgie is focused on simplicity and elegance. Designed with the modern user in mind. Only a minimum of packages are installed in ExTiX Budgie. You can of course install all packages you want. Even while running ExTiX Budgie live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Budgie.

ABOUT ExTiX
All four ExTiX systems are based on Ubuntu and Debian. ExTiX Budgie is based on Ubuntu 18.04.1 LTS. This ExTiX Budgie Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

Used KERNEL
My special kernel 4.18.0-exton corresponding Kernel.org’s kernel 4.18.

What’s new in Linux kernel 4.18?

SCREENSHOTS
ExTiX Budgie Desktop with Spotify running
ExTiX Budgie Desktop – live
ExTiX Budgie Desktop – root
ExTiX Budgie running in VMware

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonExton Linux SystemsLinux

ExTiX Deepin 18.8 Build 180815 for non-efi computers – an extra version of ExTiX

15
Aug
2018

NEWS 180815 ABOUT ExTiX Deepin 18.8
I’ve made an extra version of ExTiX Deepin 18.8 for NON-UEFI computers, which means that you can use the Calamares Installer also in VirtualBox and/or VMware. Build 180807 of ExTiX Deepin 18.8 is for UEFI computers. Using Build 180815 you can install ExTiX 18.8 Deepin in any language in for example VirtualBox, change everything to your liking and then create a new ISO with Refracta Snapshot (pre-installed). I.e. you can create your very own live and installable Linux/Ubuntu system. That can be done even in VirtualBox and/or VMware. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 15 min! So simple that even a 10 year child can do it.

KERNEL
ExTiX 18.8 Build 180815 uses kernel 4.18.0-exton corresponding Kernel.org’s latest kernel 4.18, released 180812.

Why two versions of ExTiX 18.8 Deepin?
The thing is that the packages grub-pc and grub-efi-amd64 can’t be installed at the same time. To be able to use Calamares Installer on non-efi computers grub-pc has to be installed.

SCREENSHOT
ExTiX Deepin (NON-UEFI) Build 180815 being installed in VirtualBox using Calamares Installer

READ MORE…

No Comments extonExton Linux SystemsLinux
1 … 10 11 12 13 14 15