Tag: Linux

ExTiX 19.1, Build 181228, with KDE 4.17, Kodi 18 “Leia”, Calamares, Refracta Tools, Nvidia and kernel 4.20.0-exton

28
Dec
2018

ExTiX 19.1 – Build 181228
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 19.1 KDE/Kodi Live DVD. (The previous KDE version was 18.6 from 180602). The best thing with ExTiX 19.1 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! As an alternative to KDE you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the KDE Desktop as the ordinary user extix. I have enabled a few addons in Kodi. Most important the Netflix addon.

ABOUT
ExTiX 19.1 KDE DVD 64 bit is based on Debian 9 and Ubuntu 18.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed KDE Frameworks 5.44.0 with KDE 4.17. KDE Frameworks are 60 addon libraries to Qt which provide a wide variety of commonly needed functionality in mature, peer reviewed and well tested libraries with friendly licensing terms.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.20.0-exton.

What’s new in Linux kernel 4.20?

WHAT’S SO SPECIAL about ExTiX and especially the new version from 181228?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. ExTiX KDE is now more stable than ever. All packages have been upgraded to the latest version by 181228.
4. I’ve replaced kernel 4.15.0-23-exton with kernel 4.20.0-exton. Latest by 181228.
5. I have replaced Ubuntu’s installation program Ubiquity (live installer) with Calamares. You can also (still) use Refracta Installer. They work very well. I.e. a new user (your user) will be created during the installation process and you’ll get a chance to change root’s password. Just start any of the installers from the menu under System.
6. The best thing with ExTiX 19.1 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system.
7. As an alternative to KDE you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the KDE Desktop as the ordinary user extix. I have enabled a few addons in Kodi. Most important the Netflix addon.
8. Nvidia proprietary Graphics driver 410.78 (patched for kernel 4.20) is pre-installed in ExTiX 19.1.

SCREENSHOTS
Screenshot 1 of ExTiX 19.1 Desktop – logged in as the ordinary user extix
Screenshot 2 of ExTiX 19.1 Desktop – logged in as root (superuser)
Screenshot 3 of ExTiX 19.1 – showing enabled addons in Kodi 18
Screenshot 4 of ExTiX 19.1 – Netflix running in Kodi 18

READ MORE…

No Comments extonExton Linux SystemsLinux

FedEX Rpi3 (Fedora 29) for Raspberry Pi 3 Model B and Model B+ :: Build 181206

06
Dec
2018

NEWS 181206: FedEX Rpi3 for Raspberry Pi 3 Model B and Model B+ is a “remaster” of the Fedora Project’s Fedora 29 build for ARM

The Raspberry Pi is a credit card-sized ARM based single board computer (SBC). Fedora supports the the Raspberry Pi Model B versions 2 and 3 in all current Fedora releases, the 3+ is supported in Fedora 29 without any requirement of third party kernels or scripts to adjust official images.

FAQ
The documentation on Fedora Project ARM includes a Frequently Asked Questions (FAQ) about what is supported and what isn’t.

Why a remaster of the original Fedora 29 image?
The original Fedora 29 system uses the Gnome desktop. Since the Raspberry Pi 3 computer only has 1GB RAM Gnome is way to “heavy” to run smoothly. I have therefore in my remaster FedEX removed most of the Gnome applications and replaced the Gnome desktop environment with LXDE. LXDE, which stands for Lightweight X11 Desktop Environment, is a desktop environment which is lightweight and fast. It is designed to be user friendly and slim, while keeping the resource usage low. LXDE uses less RAM and less CPU while being a feature rich desktop environment. Furthermore I have “blacklisted” newer kernels than the one installed now, which is 4.18.16-300-fc29. Using newer Fedora kernels you won’t have a Wifi connection no matter what you do.

Study all installed packages in FedEX…

FedEX PERFORMANCE
Despite using LXDE the FedEX system is not very fast. When running YouTube in Firefox you’ll even have to be a bit patient. For some unknown reason the system performs slightly better when logged in as root. The original Fedora 29 Rpi 3 system has the same problem. If you want to run a real fast system on your Rpi 3 Model B+ computer you should go for RaspEX with BunsenLabs Build 181010 or RaspEX with LXDE Build 181022. A member on raspex.exton.se wrote this “review” the other day: In three days I´ve tried out different Linux distros on a laptop and on my rpi3b, “pure Ubuntu”, Kali, RaspArch, Arch and yours. Finally it feels right on my Rpi with RaspEX, easy to install and with only “2 problems” you get 9/10 (rootfs.sh and no_pubkey). After spending like 14 hours yesterday trying to install Arch on a HP-laptop, with both manual tutorial and some git-hub-pro-script, failing Big Time, this was a relief. Took me like 15min. Kali + HP = nice. RPI + RaspEX = love!

WHO SHOULD RUN FedEX Rpi3/Fedora 29 for Raspberry Pi 3?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Compatibility :: December 2018
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, EXTON OpSuS Rpi, FedEX Rpi3 and RaspArch. I have until now (181126) upgraded RaspEX, RaspEX with OpenCPN, RaspArch, EXTON OpSuS Rpi, FedEX Rpi3 and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

SCREENSHOTS
FedEX’s LXDE Desktop
DNF running
Firefox and Conky running

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

EXTON OpSuS Rpi (openSUSE Tumbleweed) for Raspberry Pi 3 Model B+ with XFCE and kernel 4.19.1-1 – Build 181126

26
Nov
2018

News 181126 about EXTON OpSuS Rpi
I’ve made a “remaster” of openSUSE’s Tumbleweed image for Raspberry Pi 3 with the XFCE Desktop and many other more or less necessary packages. Study the full package list.

The Raspberry Pi 3 is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video.

Why a remaster of the original openSUSE image?
I did it mostly because it’s fun. My version has one big advantage though since you can enjoy sound. Good if you like YouTube for example. I’ve also added some “necessary” packages and prevented installations of all KDE packages. Watch this screenshot. KDE is way to heavy to run on the Rpi computer.

EXTON OpSuS Rpi Tumbleweed’s performance
The system is not very fast. When running YouTube in Firefox you’ll even have to be a bit patient. Especially if you don’t create a SWAP partition as I’ve described on the INFO site. With a SWAP partition the system will function better. It will still not be fast, but faster. For some unknown reason the system performs slightly better when logged in as root. The original openSUSE Rpi system has the same problem. If you want to run a real fast system on your Rpi 3 Model B+ computer you should go for RaspEX with BunsenLabs Build 181010 or RaspEX with LXDE Build 181022. A member on raspex.exton.se wrote this “review” the other day: In three days I´ve tried out different Linux distros on a laptop and on my rpi3b, “pure Ubuntu”, Kali, RaspArch, Arch and yours. Finally it feels right on my Rpi with RaspEX, easy to install and with only “2 problems” you get 9/10 (rootfs.sh and no_pubkey). After spending like 14 hours yesterday trying to install Arch on a HP-laptop, with both manual tutorial and some git-hub-pro-script, failing Big Time, this was a relief. Took me like 15min. Kali + HP = nice. RPI + RaspEX = love!

About openSUSE Tumbleweed
The Tumbleweed distribution is a pure rolling release version of openSUSE containing the latest stable versions of all software instead of relying on rigid periodic release cycles. The project does this for users that want the newest stable software.

WHO should run EXTON OpSuS Rpi/openSUSE?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Compatibility :: November 2018
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, EXTON OpSuS Rpi and RaspArch. I have until now (181126) upgraded RaspEX, RaspEX with OpenCPN, RaspArch, EXTON OpSuS Rpi and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

SCREENSHOTS
The XFCE Desktop when logged in as the ordinary user live
The XFCE Desktop when logged in as root (superadmin)

READ MORE…

1 Comment extonExton Linux SystemsLinuxRaspberry Pi

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 180928 with Refracta Tools

26
Sep
2018

NEWS 180928 about Raspberry Pi Debian Pixel – 32bit – an Exton Build
My second Debian Pixel Build from is from 170425 . My third build is from 180316. Study all included packages – latest by 180928. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

NEWS 180920 – a YouTube video about Debian Pixel
I’ve discovered a YouTube video about my Debian Pixel Build 170425. The video is called Debian Pixel..Exton forks it for you..
This video is of course also valid for Build 180928. By watching the video you can learn a lot about Debian Pixel’s features.

Most important changes in Build 180928
This build replaces version 161223 , 170425 and 180316 . I’ve upgraded Raspbian/Debian from Jessie to Stretch – Debian stable. I’ve also upgraded the kernel from 3.16.0-4-686-pae to 4.9.0-9-686-pae. I’ve also included kernel 4.9.0-9-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies.

SCREENSHOTS
Screenshot 1 – Spotify running
Screenshot 2 – Samba running (reach your Windows computers in your network)
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Refracta Installer has started in VMware
Screenshot 5 – Wireless connection with NetworkManager and Wicd (installed in Build 170425, 180316 and 180928)
Screenshot 6 – Wifi connection using NetworkManager – in detail

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

CruxEX (CRUX 3.4), 64bit, live USB with LXDE, Google Chrome (for Netflix), Spotify and kernel 4.18.7-exton – Build 180912

13
Sep
2018

CruxEX 3.4 64 bit Linux Live USB is based on CRUX 3.4 (latest version, released 180512), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.4 2018 uses the LXDE Desktop environment. I have replaced the original CRUX kernel 4.14.20 with “my” special kernel 4.18.7-exton, with support for “extra everything”.

NEWS 180912
CruxEX 2018 is distributed only as a Zip file. Install my new version of CruxEX 3.4 64bit from 180912 to a USB Pen Drive and run the system superfast from RAM – read this INSTRUCTION. If you later on decide you want to install CruxEX to hard drive from the USB Pen Drive all your system changes will also be installed to the hard drive. NOTE: Unfortunately persistence can’t be enabled anymore while running CruxEX from a USB stick.

About CruxEX 3.4 version 180912
All packages have been upgraded to the latest available version (with prt-get sysup). Furthermore: This version uses kernel 4.18.7 released 180909! And of course Google Chrome for Netflix!

Whats new in kernel 4.18?

Unique
CruxEX 3.4 2018 build 180912 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading. The good thing with CruxEX is that it is a live system (which CRUX original isn’t) and that you can run CruxEX superfast from RAM. Also that you can install CruxEX to hard drive in about 5 min and then have a ready-to-go CRUX desktop system. You can after that install any (extra) desktop environment you like.

SCREENSHOTS
1. The LXDE Desktop
2. Prt-get in action
3. CruxEX running from USB in VirtualBox
4. Spotify running in CruxEX
5. The USB live boot screen

Study ALL installed packages…

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonExton Linux SystemsLinux

Run your Ubuntu/Debian 64 bit system with the latest kernel – 4.18.3!

19
Aug
2018

linuxI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.18.3-exton, equivalent to Kernel.org’s latest stable kernel 4.18.3 released yesterday (180818).

What’s new in Linux kernel 4.18?

Install kernel 4.18.3-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Stretch (Debian 9) and Debian Buster (upcoming Debian 10). If you want to use my kernel 4.18.3-exton for 64 bit systems, you can DOWNLOAD it from here.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.18.3-exton.zip. Go into the folder ubuntu-kernel-64bit-4.18.3-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.18.3-exton. Could be useful if you like to play games. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.18 without “patches” etc. On the other hand it’s a fact that kernel 4.18 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.18.3-exton is compiled (almost) the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

No Comments extonLinux

ExTiX 18.4 – “The Ultimate Linux System” – with LXQt 0.12.0, Refracta Tools, Calamares Installer and kernel 4.16.2-exton – Build 180419

19
Apr
2018

I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.4 LXQt Live DVD. (The previous version was 17.8 from 171012).

ABOUT
ExTiX 18.4 LXQt DVD 64 bit is based on Debian 9 Stretch and Ubuntu 18.04 Bionic Beaver, to be released 180426. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.12.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.16.2-exton corresponding Kernel.org’s stable kernel 4.16.2.

What’s new in kernel 4.16?

NEWS ABOUT ExTiX 18.4 Build 180419 with the LXQt Desktop environment
1. ExTiX LXQt is based on Ubuntu 18.04 Bionic Beaver. LXQt 0.12.0 is used as Desktop environment. All packages have been updated to the latest version by 180419. Kernel 4.16.2-exton is used. (Kernel.org‘s kernel 4.16.2).
2. Firefox has replaced Google Chrome as Web Browser. It’s now possible to watch Netflix movies also in Firefox (while running Linux).
3. I have replaced Ubuntu’s installer Ubiquity with Calamares Installer. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases.
4. Other included important/useful packages are: LibreOffice, Thunderbird, GParted, Brasero, SMPlayer, GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.

Refracta Tools
While running ExTiX LXQt 18.4 live or from hard drive you can use Refracta tools (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

THE IMPORTANCE of ExTiX LXQt now being based on Ubuntu 18.04 (UNSTABLE/DEVELOPMENT)
I don’t think it is too important since ExTiX LXQt doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report. Besides the FinalFreeze of upcoming Ubuntu 18.04 is today (180419).

SCREENSHOTS
Screenshot of ExTiX 18.4 Desktop – LXQt 0.12.0
Netflix running in ExTiX 18.4
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat 7.1.2!

1 Comment extonExton Linux SystemsLinux

DebEX Barebone (Debian unstable/experimental) with Budgie Desktop 10.4, Refracta tools and kernel 4.15.4-exton – Build 180219

19
Feb
2018

NEWS 180219 about DebEX Budgie – a Refracta Build
A new version of DebEX Barebone with Budgie Desktop 10.4 and kernel 4.15.4-exton (equivalent to Kernel.org’s latest kernel 4.15.4) is ready. All packages have been updated to the latest version as of February 19, 2018. DebEX Barebone is now based on Debian unstable/experimental. I.e. cutting edge software is used. Most important: The ISO has decreased from 1330 MB to 899 MB, which makes it easier to run the system live from RAM. That ability allows DebEX Budgie to be very fast, since reading and writing data from/to RAM is much faster than from a hard disk drive.

Important about Refracta
You can use the Refracta tools (pre-installed in all three versions of DebEX) to create your own installable Debian Live DVD once you have installed DebEX to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 50 min! You’ll find the ISO in /home/debex.

SCREENSHOTS
1. The Budgie Desktop when logged in as the ordinary user user
2. The Budgie Desktop when logged in as root
3. The Budgie Desktop when Refracta snapshot is running

READ MORE…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!
No Comments extonExton Linux SystemsLinux

ExLight 64bit, Build 180217, based on Debian Unstable/Experimental with Enlightenment 0.22.1, Budgie 10.4 and Refracta tools

12
Feb
2018

NEWS 180217 ABOUT ExLight
I’ve made a new version of ExLight, which also have the Budgie Desktop 10.4 pre-installed. You can now log in to Enlightenment 0.22.1 on all kind of computers, (which you couldn’t before). Budgie is focused on simplicity and elegance. Designed with the modern user in mind. See a screenshot of ExLight running the Budgie Desktop.

New sources for ExLight Build 180217
This new version of ExLight is based on Debian unstable/experimental. I.e. cutting edge software is used. Build 180217 is a total rebuild of ExLight. The ISO file size has decreased from 1560 MB to 986 MB, which means that ExLight now can run even faster from RAM.

NEWS 180217 ABOUT ExLight
I’ve made a new extra version of ExLight today based on Debian unstable/experimental. The “old” version from 171112 is based on Ubuntu 17.10 (alias Artful Aardvark) and Debian Buster/Stretch. Furthermore version 171112 uses Enlightenment 0.20 installed from Ubuntu’s repositories. Build 180217 of ExLight uses Enlightenment 0.22.1 (latest). Enlightenment 0.22.1 was released 171122. This version of ExLight (180217) has a much nicer look since I’ve installed the R-NightBling-II_E22 theme.

I have kept the old version (from 171112) of ExLight on SourceForge.net server since that version of ExLight can be considered more stable being based (mostly) on Ubuntu 17.10.

KERNEL
ExLight Build 180217 uses kernel 4.15.2-exlight, corresponding Kernel.org‘s kernel 4.15.2.

What’s new in Linux kernel 4.15?

Installed packages
Study all installed packages in ExLight Build 180217.

VirtualBox and VMware
ExLight Build 180217 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe).

SCREENSHOTS
1. The Enlightenment 0.22.1 Desktop
2. The Login Screen – LightDM. Choose between Enlightenment and Budgie Desktop
3. Running in VirtualBox
4. Running in VMware
5. Refracta Installer running in Expert mode
6. Refracta Snapshot running
7. Showing how to change locales

READ MORE ABOUT ExLight Build 180217 and 171112…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!
No Comments extonExton Linux SystemsLinux

EXTON OpSuS Tumbleweed – KDE_Plasma/Cinnamon 64 bit Linux Live USB – Build 180114 – USB persistence!

14
Jan
2018

EXTON OpSuS Tumbleweed is based on openSUSE Tumbleweed, which is a rolling distribution. I.e. no need for new installations. Just run the command sudo zypper dup and you will always get the latest stable packages/kernels.

ABOUT
EXTON OpSuS Tumbleweed uses kernel 4.14.12-1. Desktop environments: KDE 4.14.38 and Cinnamon 3.6.2. Installed programs: Among many other programs, Firefox, Google Chrome (for Netflix), Thunderbird, Gimp, SMPlayer, NetworkManager, GParted and LibreOffice. You’ll run the system as root or as the ordinary user live. Root’s and live’s password is root/live. EXTON OpSuS can easily be installed to hard drive (of those who so desire). You’ll have to do it manually though – please read below. All programs have been updated to the latest available stable version as of January 14, 2018. The system language is English.

Installing to a USB stick with persistence and then to hard drive
After installing EXTON OpSuS Tumbleweed to a USB stick, you can change the system completely and then install the system (manually) to a hard drive. You can also continue to have it only on the USB stick. If you install EXTON OpSuS on a large enough (and fast) USB stick, you can go ahead and install for example LXDE, Mate or Xfce4. All your system changes are automatically saved to the USB stick. Note that you’ll have to use a different/new USB stick if you want to run EXTON OpSuS on another computer. That’s because certain files necessary for the configuration will be destroyed after the first boot. I.e.: You’ll have to use the same USB stick on the same computer all the time. Note also that all other Linux systems (and Windows systems) you may have installed on your computer will be bootable from the USB stick’s Grub menu – Grub picture 1 and picture 2. You may have to start EXTON OpSuS in Recovery mode after the first boot as picture 2 shows.

Manual installation of EXTON OpSuS from USB stick to hard drive
PREREQUISITE: You’ll have to have at least one Linux system installed on your computer and use Grub2 as boot loader. If so then follow my INSTRUCTION.

Why should someone choose EXTON OpSuS/openSUSE?
openSUSE is grossly underestimated (in my opinion). It’s a wonderful Linux system.

SCREENSHOTS
Running KDE
Running Cinnamon
Grub menu when booting from the USB stick for the second time
Grub is updated
Install commands
Installing to USB with Etcher

READ MORE….

No Comments extonExton Linux SystemsLinux
1 2 3 4 … 10