Month: January 2022

SlackEX (Slackware) 15.0 RC3 (released 220113) with Enlightenment 0.25.1 (released 220103) respectively Xfce4 as an alternative DE, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220117

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX Build 220117 with the Enlightenment and Xfce4 Desktops
A new extra version of SlackEX is ready. It is based on Slackware 15.0 RC3 released 220113. In this version I’ve installed Enlightenment 0.25.1 – latest version and Xfce4. I’ve also replaced kernel 5.10.70-exton with kernel is 5.16.0-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.25.1 I had to do it from source. The whole thing was very time consuming since a lot of dependencies had to be satisfied. The most important package installed is Refracta Snapshot. With that you can build your own Slackware distribution with Enlightenment 0.25.1. When a new version of Enlightenment is ready you too should be able to install it from source. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. You can easily switch from Enlightenment to Xfce4 by editing /root/.xinitrc. Watch this screenshot. Then log out and back again. That can of course also be done when running SlackEX live. (From a DVD or USB stick).  Study the full package LIST in SlackEX Build 220117. This Build of SlackEX replaces version 211014 (with Xfce4) and version 201112 (with Enlightenment). NOTE: You’ll run SlackEX Build 220117 as root. The password for root is root. If you don’t like to run a Linux system as root you can create a “normal” user. Watch this screenshot.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – root’s Desktop – Enlightenment
Screenshot 2
root’s Desktop with Xfce4 as DE

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExTiX Deepin 22.1 Live based on Deepin 20.3 (latest) with Skype, Spotify, Refracta Snapshot and kernel 5.16.0-exton :: Build 220114

NEWS 220114 ABOUT ExTiX Deepin
I’ve released a new version of ExTiX Deepin today (220114). This ExTiX Build is based on Deepin 20.3 released by Deepin Technology 211123.

NEW FUNCTIONS etc

1. You can run ExTiX from RAM. Use boot alternative 2 (load to RAM) or Advanced. A wonderful way to run Linux if you have enough RAM. Everything will be super fast. When ExTiX has booted up you can remove the DVD or USB stick.
2. You will have the opportunity to choose language before you enter the Deepin 20.3 Desktop. All main languages are supported.
3. I have replaced Deepin Installer with the Reborn version of Deepin Installer. Works better in every way.
4. I have replaced kernel 5.14.2-exton with kernel 5.16.0-exton. Corresponding the latest available stable kernel from Kernel.org.
5. Spotify and Skype are pre-installed.
6. You can watch Netflix while running Firefox.
7. You can install ExTiX Deepin also in VirtualBox/VMware using Refracta Installer or Deepin Installer. (In previous versions you had to “chroot” into the install partition and install Grub).
8. As an alternative to Apt you can use the Cactus Package Manager. Example commands: cpm i mousepad and cpm s gimp. (Install Mousepad and search for Gimp). CPM works very well.
9. Install ExTiX to a USB stick preferably with Rufus 3.17 in Windows – see below how it looks.
10. In version 220114 I’ve also included Refracta Installer. Use it in VirtualBox if you want to have an exact copy of ExTiX Deepin installed. You don’t have to “chroot” to install Grub. Just choose to “Copy Grub files” when asked to. Watch this screenshot.
11. VirtualBox Guest Additions are pre-installed. With those installed you can run ExTiX in full screen in VirtualBox. Watch this screenshot.

UNIQUE
I may add that there is no other live version of Deepin 20.3.

SCREENSHOTS
1. ExTiX running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. Spotify is running
3. Netflix is running in Firefox
4. ExTiX running in VMware Workstation Player in Windows in full screen after VMware Tools have been installed
5. ExTiX running in Qemu in Linux (Ubuntu). NOTE: ExTiX Deepin (and other Linux systems) runs very fast in Qemu (in Linux). Qemu is a generic and open source machine emulator and virtualizer. Superior to VirtualBox…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
1 Comment extonExton Linux Systems

SlackEX (Slackware) 15.0 RC2 with LXQt, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220110

NEWS ABOUT SlackEX 15.0 RC2 with LXQT
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0 RC2. This time with LXQt as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt packages following the instructions at Gitlab.com. If you already have Slackware/SlackEX installed to hard drive you can do the same. (If you want LXQt). It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 220110 is a live remaster of Slackware 15.0 RC2. It was released 211118. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Kernel 5.15.5-exton-amd64-rt21 is used. You can (of course) install Slackware’s latest kernel 5.15.13 if you want. But to be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5-15-5-exton-amd64-rt21. Study all pre-installed packages in Build 220110…

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remasters of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEW features in version 220110 of SlackEX
Kernel 5.15-5-exton-amd64-rt21 is used so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own Slackware 15.0 system. Read more about Refracta Snapshot. LXQt is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Log in to LXQt as the ordinary user user with password live or as root with password root. While running SlackEX LXQt in VirtualBox you can do so in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot. Also showing a Samba connection in VirtualBox.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – user’s Desktop – LXQt
Screenshot 2 – Showing a Samba connection – LXQt
Screenshot 3 – MPlayer is running
Screenshot 4 – The live boot screen

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

CruxEX 2022 (CRUX 3.6.1) 64bit Linux Build 220104 – Install it to a USB Pen Drive and enjoy PERSISTENCE!

LATEST NEWS ABOUT CruxEX 220104
I have released a new version of CruxEX today. This version has VirtualBox Guest Additions pre-installed, which means (among other things) that you can run CruxEX in VirtualBox in full screen. Read about how to install and run CruxEX from a USB stick in VirtualBox. Watch a screenshot when CruxEX is running i VirtualBox in full screen. (Using VirtualBox Guest Additions).

CruxEX 2022 64 bit Linux Live USB is based on CRUX 3.6.1 (latest version, released 201212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.6.1 2022 uses the LXDE Desktop environment. I have replaced the original CRUX kernel 5.10 with “my” special kernel 5.15.12-exton-amd64, with support for “extra everything”.

Replacement
My first remaster of CRUX 3.6.1 is from 201223. Now (220104) I have upgraded all included packages and replaced kernel 5.9.15-exton with kernel 5.15.12-exton-amd64. Study the most important upgraded packages.

Kernel and installed packages
Kernel 5.15.12 is the latest available stable kernel as of 220104. Among all installed and updated applications are Firefox, Google Chrome (for Netflix), GParted, PCManFM, Pulseaudio, Slim Login Manager, Gimp and NetworkManager. Furthermore compilation tools so that you can install programs from source. Note: Google Chrome is not in CRUX repositories. Nvidia Graphics Driver 470.94 is pre-installed. It will be automatically used if your computer has support for it. Furthermore I’ve installed VirtualBox Guest Additions so that you can run CruxEX in full screen in VirtualBox. Watch this screenshot.

Unique
CruxEX 3.6.1 2022 build 220104 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading. The good thing with CruxEX is that it is a live system (which CRUX original isn’t) and that you can run CruxEX super fast from RAM. Also that you can install CruxEX to hard drive in about 5 minutes and then have a ready-to-go CRUX desktop system. You can after that install any (extra) desktop environment you like. NOTE: You can (of course) install new Desktops environments and other stuff also when running CruxEX from a USB stick – PERSISTENCE! Note also: To make CRUX original ready for everyday use will normally take 2 – 3 days!

SCREENSHOTS
1. The LXDE Desktop for the live user
2. The LXDE Desktop for root
3. Prt-get in action

4. CruxEX running from USB in VirtualBox
5. The USB live boot screen
6. Netflix running in Google Chrome
7. Wireless connection

8. Running Alsamixer for sound
9. Spotify Web Player is running

Study ALL installed packages…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems