Tag: SlackEX

Run latest Slackware 64 bit (15.0 STABLE) live and create your own live installable Slackware 15.0 system with Refracta Snapshot!

About SlackEX 15.0 64 bit Build 220518 (Xfce4), Build 220117 (Enlightenment/Xfce4) and Build 220110 (LXQt)

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX BUILD 220518 with the Xfce4 DESKTOP
A new version of SlackEX is ready. It is based on Slackware 15.0 STABLE released 220202 with Xfce4 as DE. The most important package installed is Refracta Snapshot. With that you can build your own Slackware 15.0 distribution. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. Kernel 5.17.7-amd64-exton is used in this SlackEX Build. To be able to use Refracta Snapshot you’ll have to use said kernel. Otherwise you can (of course) replace “my” kernel with Slackware’s original kernel. Study the full package LIST.

Update/Upgrade from RC2 or RC3
As regards my other two SlackEX Builds you can easily upgrade the systems to Slackware 15.0 stable. Just run the command sudo slackpkg update followed by sudo slackpkg upgrade-all.

SCREENSHOTS
Screenshot 1root’s Desktop with Xfce4 as DE
Screenshot 2 – SlackEX running in VirtualBox in full screen when Guest additions have been installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX (Slackware) 15.0 RC3 (released 220113) with Enlightenment 0.25.1 (released 220103) respectively Xfce4 as an alternative DE, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220117

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX Build 220117 with the Enlightenment and Xfce4 Desktops
A new extra version of SlackEX is ready. It is based on Slackware 15.0 RC3 released 220113. In this version I’ve installed Enlightenment 0.25.1 – latest version and Xfce4. I’ve also replaced kernel 5.10.70-exton with kernel is 5.16.0-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.25.1 I had to do it from source. The whole thing was very time consuming since a lot of dependencies had to be satisfied. The most important package installed is Refracta Snapshot. With that you can build your own Slackware distribution with Enlightenment 0.25.1. When a new version of Enlightenment is ready you too should be able to install it from source. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. You can easily switch from Enlightenment to Xfce4 by editing /root/.xinitrc. Watch this screenshot. Then log out and back again. That can of course also be done when running SlackEX live. (From a DVD or USB stick).  Study the full package LIST in SlackEX Build 220117. This Build of SlackEX replaces version 211014 (with Xfce4) and version 201112 (with Enlightenment). NOTE: You’ll run SlackEX Build 220117 as root. The password for root is root. If you don’t like to run a Linux system as root you can create a “normal” user. Watch this screenshot.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – root’s Desktop – Enlightenment
Screenshot 2
root’s Desktop with Xfce4 as DE

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX (Slackware) 15.0 RC2 with LXQt, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220110

NEWS ABOUT SlackEX 15.0 RC2 with LXQT
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0 RC2. This time with LXQt as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt packages following the instructions at Gitlab.com. If you already have Slackware/SlackEX installed to hard drive you can do the same. (If you want LXQt). It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 220110 is a live remaster of Slackware 15.0 RC2. It was released 211118. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Kernel 5.15.5-exton-amd64-rt21 is used. You can (of course) install Slackware’s latest kernel 5.15.13 if you want. But to be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5-15-5-exton-amd64-rt21. Study all pre-installed packages in Build 220110…

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remasters of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEW features in version 220110 of SlackEX
Kernel 5.15-5-exton-amd64-rt21 is used so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own Slackware 15.0 system. Read more about Refracta Snapshot. LXQt is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Log in to LXQt as the ordinary user user with password live or as root with password root. While running SlackEX LXQt in VirtualBox you can do so in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot. Also showing a Samba connection in VirtualBox.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – user’s Desktop – LXQt
Screenshot 2 – Showing a Samba connection – LXQt
Screenshot 3 – MPlayer is running
Screenshot 4 – The live boot screen

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX live with Refracta Snapshot based on Slackware 15.0 RC1 – Build 211014

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt. (Only in the Enlightenment version though).

NEWS 211014 ABOUT SlackEX 15.0 RC1 with Xfce4
Slackware is not dead
even though not much has happen since Slackware 14.2 was released in July 2016. The main differences of Slackware 15 are booked to updating the versions of programs, including the transition to the Linux 5.10 kernel, a set of GCC compilers 10.3 and the system library glibc 2.33. SlackEX Build 211014 is a live remaster of Slackware 15.0 RC1. This build replaces version 210422, which was based on Slackware 15.0 BETA. A new kernel – 5.10.70-exton-amd64-rt53 – with better support for new hardware, for example new touchscreens and touchpads, is used in Build 211014. Study all pre-installed packages in Build 211014.

SCREENSHOTS
Screenshot 1 – user’s Desktop
Screenshot 2 – Showing a Samba connection
Screenshot 3 – root’s Desktop
Screenshot 4 – running in full screen in VirtualBox
Screenshot 5 – running in RAM

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
1 Comment extonExton Linux SystemsLinux

SlackEX Current (Slackware 15.0 BETA) 64 bit Live DVD with LXQt ::: Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot ::: Build 210501

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt. (Only in the Enlightenment version though).

NEWS ABOUT SlackEX 15.0 BETA with LXQt
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0 BETA. This time with LXQt as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt packages following the instructions at Gitlab.com. If you already have Slackware/SlackEX installed to hard drive you can do the same. It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 210501 is a live remaster of Slackware 15.0 BETA. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Two kernels are included in Build 210501. While running SlackEX live (from a DVD or USB stick) kernel 5.9.6-exton will be used. After a hard drive installation kernel 5.10.32-exton will be used. Kernel 5.10.32 is a long term release (LTS). To be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5.9.6-exton.

NEW features in version 210501 of SlackEX
Kernel 5.9.6-exton is kept so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own Slackware 15.0 system. Read more about Refracta at the INFO site. LXQt is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Log in to LXQt as the ordinary user user with password live or as root with password root. While running SlackEX LXQt in VirtualBox you can do so in full screen since VirtualBox Guest Additions are pre-installed (as regards both kernels). Watch this screenshot.

Study all pre-installed packages in Build 210501…

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Snapshot has started
Screenshot 2 – user’s Desktop
Screenshot 3 – Showing a Samba connection

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX Current (Slackware 15.0 BETA) 64 bit Live DVD ::: Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot ::: Build 210422

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt. (Only in the Enlightenment version).

NEWS ABOUT SlackEX 15.0 BETA with Xfce4
Slackware is not dead even though not much has happen since Slackware 14.2 was released in July 2016. The main differences of Slackware 15 are booked to updating the versions of programs, including the transition to the Linux 5.10 kernel, a set of GCC compilers 10.3 and the system library glibc 2.33. SlackEX Build 210422 is a live remaster of Slackware 15.0 BETA. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Two kernels are included in Build 210422. While running SlackEX live (from a DVD or USB stick) kernel 5.9.1-exton will be used. After a hard drive installation kernel 5.11.14-exton will be used. To be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5.9.1-exton.

Study all pre-installed packages in Build 210422…

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Installer has started – Xfce4
Screenshot 2 – user’s Desktop – Xfce4
Screenshot 3 – Refracta Snapshot has started in VirtualBox – Xfce4
Screenshot 4 – SlackEX running in VirtualBox when Guest additions have been installed – Xfce4

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

SlackEX (Slackware) live with Enlightenment 0.24.2 (latest version), kernel 5.9.6-exton and Refracta Snapshot (create your own Slackware distro) :: Build 201112

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

NEWS ABOUT SlackEX Build 201112 with the Enlightenment 0.24.2 Desktop
A new extra version of SlackEX is ready. In this version I’ve replaced Xfce4 with Enlightenment 0.24.2 – latest version. I’ve also replaced kernel 5.9.1-exton with kernel is 5.9.6-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.24.2 I followed the instructions here. The whole thing was very time consuming since a lot of dependencies had to be satisfied. All other packages from SlackEX Build 201105 remain. Most important Refracta Snapshot so you can build your own Slackware distro with Enlightenment 0.24.2. Study the full package LIST. Read about Enlightenment 0.24.2 features.

Screenshots
Screenshot 1 – Root’s Desktop – Enlightenment 0.24.2
Screenshot 2 – Live’s Desktop – Enlightenment 0.24.2
Screenshot 3 – Root’s Desktop when running in full screen in VMware Player – KDE (not pre-installed)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
1 Comment extonExton Linux Systems

SlackEX 14.2 64bit – Build 191007 – with Refracta Snapshot (so that you can create your very own live installable Slackware system)

About SlackEX 14.2, 64 bit, Build 191007

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 191007 of SlackEX
I have replaced kernel 4.14.8-x86_64-efi-exton with kernel 5.3.0-exton so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own live installable Slackware system. Read more about Refracta below. Xfce 4 is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better.

Watch Refracta Snapshot in action below.


Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Installer has started
Screenshot 2 – live’s Desktop with GSlapt running
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Boot screen when running live
Screenshot 5 – Boot screen when running from hard drive
Screenshot 6 – SlackEX running from hard drive in VMware Workstation 15 Player when VMware Tools have been installed

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

No Comments extonExton Linux SystemsLinux

SlackEX Build 171223 (Slackware 14.2) live dvd/usb with KDE 4.14.38, kernel 4.14.8-x86_64-efi-exton, Nvidia 384.98 and VirtualBox 5.2.4

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD/USB, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 171223 of SlackEX
I have replaced kernel 4.12.9-x86_64-exton with kernel 4.14.8-x86_64-efi-exton with support for “everything”. Kernel 4.14.8 was released 171220. KDE is upgraded to version 4.14.38 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.29.0, VirtualBox 5.2.4 (latest, not in Slackware’s repositories), Google Chrome 63.0.3239.108 (not in Slackware’s repositories – you can download my build at SourceForge.net), Gimp 2.8.10 (installed from source), SMPlayer 17.11.2, GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 57.0.2, Thunderbird 52.5.0, Samba 4.7.3 and GCC 7.2.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

SCREENSHOTS
Screenshot 1 – KDE 4.14.38 Desktop with Netflix running
Screenshot 2 – KDE 4.14.38 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – Nvidia settings and GSlapt running
Screenshot 5 – Hard drive installation of SlackEX in VirtualBox
Screenshot 6 – SMPlayer running

The end of the road…
I will end my SlackEX project now. It’s not needed anymore (if it ever was). Alienbob’s Slackware systems are built with liveslak scripts. Anyone can use the scripts. No special knowledge of Slackware (or Linux) is needed. A lot of different Slackware systems (built with liveslak) can be downloaded. They can all be installed to hard drive using a script called setup2hd. They can also be transferred to a USB stick using a script called iso2usb.sh.

READ MORE about SlackEX….

2 Comments Exton Linux SystemsLinux