Month: May 2022

MX Linux Exton Remix 64bit with LXQt 1.1.0 (latest) and kernel 5.10 replaced by kernel 5.17.7-amd64-exton :: Build 220524

24
May
2022

ABOUT my MX Linux Remix 220524
MX Linux (based on Debian) is by far the most popular Linux system in the world according to DistroWatch.com. I tested MX Linux a few months ago and noticed immediately that one can change the MX system and create a new ISO with MX Snapshot. My first MX Linux Remix is from 191018.

MX Linux 21
My first remix was based on MX Linux 18.3 (released in May 2019). MX Linux 21 Wildflower was released on October 21, 2021. It is based on Debian 11.3 (Stable/Bullseye).

My changes of the original MX Linux 21 system
1. All packages have been upgraded to the latest version as of 220524. Study the full package LIST.
2. The original kernel 5.10 is replaced by “my” kernel 5.17.7-amd64-exton.
3. I’ve added the LXQt Desktop. It’s in version 1.1.0 released on November 6, 2021. Version 1.1.0 is still not included in Debian’s repositories so I had to install LXQt 1.1.0 from source. (Took me a few hours). NOTE: I have (of course) also kept the original Xfce 4.16 Desktop.
4. You can run my MX Linux remix in full screen in VirtualBox, since VirtualBox Guest Additions are installed. Watch this screenshot.
5. Some cosmetic changes. I.e. new nice wallpapers.

Installation to a USB stick
Please note that you can only use Rufus 3.18 in Windows for USB installations. If you use other software the stick won’t be made bootable. Note also that you must write in DD image mode. One exception: You can without problems use Ventoy (instead of Rufus).

Performance
Everything in my remix works very well. MX Linux works on new and old computers. I can mention that I could run (and install) my MX remix without problems on my 17 year old laptop Acer Aspire 5102WLMi. You can of course make your own MX Linux Remix with my remix as “groundwork”. The whole process will only take about 5 minutes! Also in VirtualBox.

Login
Login to the Xfce4 or the LXQt Desktop as live with password live or as root with password root – screenshot.

Hard drive installations
Use MX Installer. It works very well.

SCREENSHOTS
1. root’s Desktop in LXQt 1.1.0
2. live’s Desktop in LXQt
3. live’s Desktop in Xfce4
4. Connection to a Windows computer with Samba

DOWNLOAD
The ISO can be downloaded from the Swedish Linux Society.

md5sum

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

Run latest Slackware 64 bit (15.0 STABLE) live and create your own live installable Slackware 15.0 system with Refracta Snapshot!

18
May
2022

About SlackEX 15.0 64 bit Build 220518 (Xfce4), Build 220117 (Enlightenment/Xfce4) and Build 220110 (LXQt)

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX BUILD 220518 with the Xfce4 DESKTOP
A new version of SlackEX is ready. It is based on Slackware 15.0 STABLE released 220202 with Xfce4 as DE. The most important package installed is Refracta Snapshot. With that you can build your own Slackware 15.0 distribution. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. Kernel 5.17.7-amd64-exton is used in this SlackEX Build. To be able to use Refracta Snapshot you’ll have to use said kernel. Otherwise you can (of course) replace “my” kernel with Slackware’s original kernel. Study the full package LIST.

Update/Upgrade from RC2 or RC3
As regards my other two SlackEX Builds you can easily upgrade the systems to Slackware 15.0 stable. Just run the command sudo slackpkg update followed by sudo slackpkg upgrade-all.

SCREENSHOTS
Screenshot 1 – root’s Desktop with Xfce4 as DE
Screenshot 2 – SlackEX running in VirtualBox in full screen when Guest additions have been installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 220505 with Refracta Snapshot (so you can create your own Raspberrypi Debian 11 Pixel system)

05
May
2022

NEWS 220505 about Raspberry Pi Debian 11 Pixel – 32bit – an Exton Build
My previous Debian Pixel Build from is from 201108 . Study all included packages in Build 220505 – latest by 220505. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

Most important changes in Build 220505
This build replaces version 161223 , 170425, 180316, 180928, 190705, 191102 and 201108 . I’ve upgraded Raspbian/Debian from Buster to Bullseye – Debian 11. I’ve also upgraded the kernel from 4.19.0-12-686-pae to 5.10.0-13-686-pae. I’ve also included kernel 5.10.0-13-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies. In Build 220505 I have removed Chromium. I saw no advantage in keeping it. You can run the system in full screen in VirtualBox. That’s because VirtualBox’s Guest Additions are pre-installed. Watch this screenshot.

NOTE
This Debian PIXEL 32bit build is for non-efi computers.

UNIQUE?
As far as I know there is no official Raspberry Pi OS (Raspbian) image with Debian 11.

SCREENSHOTS
Screenshot 1 – Debian PIXEL running in VirtualBox in full screen
Screenshot 2 – Refracta Snapshot has started
Screenshot 3 – Refracta Installer has started
Screenshot 4 – The installation is ready

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExTiX Mini Build 220501 with LXQt and kernel 5.17.2 :: Run it super fast from RAM and/or create your own Linux system using Refracta Snapshot!

01
May
2022

NEWS 220501 ABOUT ExTiX LXQt Mini 22.5, Build 220501
I’ve made a new updated “mini” version of ExTiX – The Ultimate Linux System. It is based on Ubuntu 22.04 LTS Jammy Jellyfish. The ISO file is of only 1340 MB, which is good if you want to run the system super fast from RAM. It should be enough with 2GB RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 2. The best thing with ExTiX 22.5 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu 22.04 system. So easy that a ten year child can do it! ExTiX 22.5 uses kernel 5.17.2-amd64-exton. Ubuntu 22.04 LTS will be supported until April 2027.

Study all pre-installed packages in ExTiX 22.5.

More about ExTiX 22.5
This ExTiX version uses LXQt as Desktop environment. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for older UEFI-enabled computers and VirtualBox/VMware. When running ExTiX 22.5 in VirtualBox you can do it in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot.

SCREENSHOTS
ExTiX version 220501 LXQt user Desktop
ExTiX LXQt running Refracta Installer – 1
ExTiX LXQt running Refracta Installer – 2
ExTiX LXQt running Refracta Snapshot

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
1 Comment extonExton Linux Systems