Tag: LXQt 1.3

ArchEX (Arch Linux) Live with Pantheon, Gnome 44.4, LXQt 1.3, kernel 6.4.12.arch1-1 and Calamares Installer 3.2.62 :: Build 230826

26
Aug
2023

ABOUT ArchEX Build 230826
I’ve made a new extra version of ArchEX with Pantheon, Gnome 44.4 and LXQt 1.3 as Desktop Environments (DE). This ArchEX version uses kernel 6.4.12-arch1-1. Pantheon is the desktop environment of elementary OS. It is written in Vala, using GTK 3 and Granite. ArchEX Build 230826 has the same “bugs” as ArchEX Build 230812 – see below.

Known “bugs” or errors in this ArchEX Build
I’ve kept my “old” ArchEX version 220905 on the server since ArchEX Build 230826 (and Build 230812) have some “bugs” i.e.:
1) When installing ArchEX to hard drive using Calamares Installer you’ll have to format the install partition in another Linux system in advance. If you let Calamares format you will get filesystem errors and therefore ArchEX won’t boot. Watch this screenshot…
So using Calamares it shall look like this screenshot shows.
NOTE 1: When installing ArchEX in VirtualBox you don’t have to worry about filesystem errors (for some unknown reason).
2) It can be difficult to configure a WiFi connection. To be able to use a WiFi connection you may have to unload and load the correct kernel module.
For example athk10_pci, iwlwifi or wl. Example commands:
$ sudo modprobe -r ath10k_pci
$ sudo modprobe ath10k_pci
Check which kernel module to load with the command: lspci
Also watch this screenshot…
NOTE 2: The WiFi problem is gone after a hard drive installation. I.e. you will automatically be connected.
3) Not a bug, but to be able to run the file manager PCManFM-qt as root you’ll have to use this command: sudo dbus-launch pcmanfm-qt.
4) Also not really a bug, but to be able to paste highlighted text into a terminal with your mouse’s middle button (which can be very handy) you’ll have to use QTerminal or xterm. It is not possible using LXTerminal or Gnome Terminal. Watch this screenshot…
NOTE 3: The “middle button problem” occurs only when logged in to the Pantheon Desktop.

Aside from the above mentioned bugs ArchEX Build 230826 works very well both live and from hard drive.

Study all installed packages in ArchEX 2023 with Pantheon, Gnome 44.4 and LXQt 1.3.

Screenshots
ArchEX Pantheon Desktop
ArchEX Gnome Desktop
ArchEX LXQt Desktop
ArchEX running in VirtualBox with Guest Additions installed
ArchEX running in VMware
root’s LXQt Desktop

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ArchEX (Arch Linux) Live with Deepin 20.9, LXQt 1.3, kernel 6.4.9.arch1-1 and Calamares Installer 3.2.62 :: Build 230812

13
Aug
2023

NEWS about ArchEX 230812
A new version of ArchEX (Arch Linux Live) is ready! In this new version, which I call ArchEX 2023, I have added the Deepin 20.9 (latest) Desktop Environment (DE). Deepin DE (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin DE very much when I installed it in ExTiX 23.4. So I thought why not install Deepin DE also in ArchEX? Furthermore I have added the  LXQt 1.3 (latest) Desktop Environment. You can choose the one you want at LightDM’s Login screen.

Known “bugs” or errors in this ArchEX Build
I’ve kept my “old” ArchEX version 220905 on the server since ArchEX Build 230812 have some “bugs” i.e.:
1) You can’t change wallpaper in Deepin. That is a known bug in Arch Linux and all distros based on Arch Linux.
2) When installing ArchEX to hard drive using Calamares Installer you’ll have to format the install partition in another Linux system in advance. If you let Calamares format you will get filesystem errors and therefore ArchEX won’t boot. Watch this screenshot…
So using Calamares it shall look like this screenshot shows.
NOTE: When installing ArchEX in VirtualBox you don’t have to worry about filesystem errors (for some unknown reason).
3) It can be difficult to configure a WiFi connection. To be able to use a WiFi connection you may have to unload and load the correct kernel module.
For example athk10_pci, iwlwifi or wl. Example commands:
$ sudo modprobe -r ath10k_pci
$ sudo modprobe ath10k_pci
Check which kernel module to load with the command: lspci
Also watch this screenshot…
Aside from the above mentioned bugs ArchEX Build 230812 works very well both live and from hard drive.

Study all installed packages in ArchEX 2023 with Deepin and LXQt.

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
ArchEX Deepin Desktop
ArchEX LXQt Desktop
ArchEX running in VirtualBox with Guest Additions installed
ArchEX running Calamares

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ArchEX (Arch Linux) “Mini” with LXQt 1.3, all Arch Linux installation scripts, Calamares, Yay, VirtualBox Guest Additions and kernel 6.4.3 (latest) :: Build 230719

19
Jul
2023

NEWS ABOUT ArchEX 230719
I’ve made a new extra “Mini” version of ArchEX. It has four advantages compared with ArchEX Build 220905.

A) This ArchEX build is smaller. The ISO file is “only” of 2330 MB compered with Build 220905 which is of 4010 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 230719. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since the Calamares Installer and Yay has a lot of dependencies.

B) ArchEX Build 230719 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 230719 (and in Build 220905). Watch this screenshot. In Qemu you can just choose the screen resolution you want.

D) ArchEX Build 230719 uses kernel 6.4.3 (latest) and has support for more wireless cards. Kernel modules ath10k and wl are loaded also when running ArchEX live, which obviously means a lot.

Study all installed packages in Build 230719…

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini installing LibreOffice while running live
4. Installing Arch Linux the Arch way

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExTiX 23.5-2 – “The Ultimate Linux System” – based on Ubuntu 23.04 with LXQt 1.3, Refracta Snapshot and kernel 6.3.1-amd64-exton :: Build 230530

30
May
2023

ExTiX 23.5-2 LXQt – Build 230530
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 23.5-2 LXQt Live System. (The previous LXQt version was 22.8 from 220814). ExTiX 23.5-2 is based on Ubuntu 23.04 (Lunar Lobster)! Ubuntu 23.04 will be supported (only) until January 2024. To be able to upgrade LXQt from version 0.17 to 1.3 I first had to upgrade Ubuntu from version 22.04 (supported until April 2027) to 23.04. The best thing with ExTiX 23.5-2 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! One other very good thing with this version of ExTiX is that it is quite light. The ISO file is of only 2050 MB, which means that you can run the system super fast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 3 or Advanced options… >> load to RAM.

ABOUT
ExTiX 23.5-2 LXQt System 64 bit is based on Debian Sid and Ubuntu 23.04. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 1.3 (latest version, released 230415). LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

SCREENSHOTS
1. ExTiX LXQt – root’s Desktop
2. ExTiX LXQt – user’s Desktop
3. ExTiX 23.5-2 running in full screen in VirtualBox
4. ExTiX LXQt running in VMware

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems