Tag: Arch Linux

RaspArch Rpi4 Build 221127 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.20, Win32 Disk Imager or Etcher in Windows!

27
Nov
2022

rasparch-logoRaspArch Build 221127 especially for the new Raspberry Pi 4 released in May 2020
This version (221127) is especially made for the “new” Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

NEWS 221202
I have uploaded a new version of RaspArch after I’ve discovered a better way to configure the system. I.e. I’ve replaced /boot/config.txt with this file. The new configuration makes the system automatically choose the best possible resolution for your monitor. Watch this screenshot when I’m using a 3440×1440 (Ultrawide) monitor.
NOTE: If you already have installed RaspArch Build 221127 you don’t have to reinstall. Just replace /boot/config.txt with the one I’ve provided – see above. Then reboot. You will probably notice a big difference.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 5.15.79-2-rpi-ARCH and the LXDE Desktop environment.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root
Screenshot 3 – Using Yay (while installing SMPlayer)
Screenshot 4 – Samba connection to a Windows computer
Screenshot 5 – showing that you can watch 4K videos using Firefox

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

ArchEX (Arch Linux) “Mini” with LXQt 1.1.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.19.6 (latest) :: Build 220904

04
Sep
2022

NEWS ABOUT ArchEX 220904
I’ve made a new extra “Mini” version of ArchEX. It has four advantages compared with ArchEX Build 220901.

A) This ArchEX build is smaller. The ISO file is “only” of 1740 MB compered with Build 220901 which is of 4010 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220904. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220904 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220904 (and Build 220901). Watch this screenshot. In Qemu you can just choose the screen resolution you want.

D) ArchEX Build 220904 uses kernel 5.19.6 (latest) and has support for more wireless cards. Kernel modules ath10k and wl are loaded also when running ArchEX live, which obviously means a lot.

Study all installed packages in Build 220904…

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini installing LibreOffice while running live
4. Installing Arch Linux the Arch way

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux Systems

ArchEX (Arch Linux) Live with Deepin 20.7, GNOME 42, Gnome Classic, LXQt 1.1.0, LXDE, kernel 5.19.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220905 and 220904

01
Sep
2022

NEWS ABOUT ArchEX 220905
Today I discovered that I had forgot to add “cowspace” (sudo mount -o remount,size=2G /run/archiso/cowspace) in ArchEX Build 220901. I therefore had to upload a new ArchEX version today (220905). This version uses kernel 5.19.6 and has more support for various wireless cards.

NEWS about ArchEX 220901
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.7 (latest) Desktop Environment (DE). Deepin DE (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin DE very much when I installed it in ExTiX 22.6. So I thought why not install Deepin DE also in ArchEX? Furthermore I have added the GNOME 42 (latest) and LXQt 1.1.0-1 (latest) Desktop environments. As “extra” Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive! Note that you can run ArchEX in full screen in VirtualBox directly from the ISO file since VirtualBox Guest Additions are pre-installed!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 42/Gnome Classic/LXQt/LXDE.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.  You can very easy install ArchEX to hard drive in any language using Calamares Installer. Also in VirtualBox/VMware without any hassle.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 42 Desktop
ArchEX LXQt Desktop
ArchEX LXDE Desktop
ArchEX Gnome Classic Desktop
ArchEX Deepin full Desktop running in VMware

READ MORE…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

RaspArch Rpi4 Build 220216 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.17, Win32 Disk Imager or Etcher in Windows!

16
Feb
2022

RaspArch Build 220216 especially for the new Raspberry Pi 4 released in May 2020
This version (220216) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

ArchEX (Arch Linux) “Mini” with LXQt 1.0.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.16.7 :: Build 220212

12
Feb
2022

NEWS ABOUT ArchEX 220212
I’ve made a new extra “Mini” version of ArchEX. It has three advantages compered with ArchEX Build 220206.

A) This ArchEX build is smaller. The ISO file is “only” of 1760 MB compered with Build 220206 which is of 3670 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220212. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220212 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220212. Watch this screenshot. In Qemu you can just choose the screen resolution you want.

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini running Samba
4. ArchEX Mini installing LibreOffice while running live

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ArchEX (Arch Linux) Live with Deepin 20.4, GNOME 40, Gnome Classic, LXQt 1.0.0, LXDE, kernel 5.16.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220206

07
Feb
2022

NEWS about ArchEX 220206
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.4 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 22.1. So I thought why not install Deepin also in ArchEX? Furthermore I have added the GNOME 40 (latest) and LXQt 1.0.0.1 (latest) Desktop environments. As “extra Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 40/Gnome Classic/LXQt/LXDE.

REPLACEMENT
This version (220206) of ArchEX replaces version 210526. I’ve replaced Yaourt with Yay – Yet Another Yogurt – An AUR Helper Written in Go. I came to know that Yaourt is dead. I.e. Yaourt is not being developed anymore. So in the new version of ArchEX I have upgraded all included packages, installed a new kernel (5.16.5) and replaced Yaourt with Yay. NOTE: While running ArchEX LIVE (from a DVD or USB stick) you can now do so super fast from RAM. Watch this screenshot. I.e. use boot alternative 3 (Copy to RAM). In this new version I’ve also added more support for Broadcom WiFi cards. I.e. kernel modules b43 and wl will be loaded from boot.

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 40 Desktop
ArchEX LXQt Desktop
ArchEX running in VirtualBox with Guest Additions installed
ArchEX running in Qemu
ArchEX Gnome Classic Desktop

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux Systems

ArchEX (Arch Linux) Live with Deepin 20.2.1, GNOME 40, Gnome Classic, LXQt 0.17, LXDE, kernel 5.12.6-arch1-1, Yay, Spotify and Calamares Installer – Build 210526

26
May
2021

NEWS about ArchEX 210526
A new version of ArchEX is ready! In this new version, which I call ArchEX 2021, I have added the Deepin 20.2.1 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 21.5-2. So I thought why not install Deepin also in ArchEX? Furthermore I have added the GNOME 40 (latest) and LXQt 0.17 (latest) Desktop environments. As “extra” Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive!

Study all installed packages in ArchEX 2021 with Deepin/GNOME 40/Gnome Classic/LXQt/LXDE.

Why trust a Chinese Distribution? The Deepin Desktop environment is developed in China and based on Debian.

How To dual boot, triple boot or multi boot Linux with Windows in a simple way and be happy
Before installing ArchEX or any other Linux system my general installation instructions may be of interest.

WHAT IS ArchEX?
ArchEX 64 bit is a new (210526) Linux live DVD based on Arch Linux. Arch motto is KISS (Keep It Simple Stupid). ArchEX uses kernel 5.12.6-arch1-1, Deepin 20.2.1, GNOME 40, GNOME Classic, LXDE and LXQt 0.17.0 Desktop environments. Deepin Desktop (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. About LXQt 0.17.0: LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. GNOME 40 provides a focused working environment that helps you get things done. It is packed with features that will make you more productive.

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
1. ArchEX Deepin Desktop
2. ArchEX GNOME 40 Desktop
3. ArchEX LXQt Desktop
4. ArchEX LXDE Desktop
5. ArchEX Gnome Classic Desktop
6. ArchEX running Spotify
7. ArchEX running in VirtualBox with VirtualBox Guest Additions installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

RaspArch Rpi4 Build 201006 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.11, Win32 Disk Imager or Etcher in Windows!

06
Oct
2020

rasparch-logoRaspArch Build 201006 especially for the new Raspberry Pi 4 released in May 2020
This version (201006) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

NEWS in RaspArch Build 201006
A new kernel – 5.4.69-1-ARCH. All included packages have been updated to the latest version as of 201006. I’ve also replaced Yaourt with Yay – Yet Another Yogurt – An AUR Helper Written in Go. I came to know that Yaourt is dead. I.e. Yaourt is not being developed anymore. I have also installed PulseAudio. Finally the sound works very well in RaspArch. Nice if you like YouTube. I’ve also replaced Wicd with NetworkManager. It works better. NOTE: To be able to install Yay I had to install a lot of development tools.

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 5.4.69-1-ARCH and the LXDE Desktop environment.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root
Screenshot 3 – Using Yay (while installing SMPlayer)
Screenshot 4 – Samba connection to a Windows computer
Screenshot 5 – showing that you can watch 4K videos using Firefox

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd 10 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments Exton Linux SystemsLinuxRaspberry Pi

ArchEX (Arch Linux) with Deepin 20 BETA, LXQt 0.15.0, kernel 5.8.12-arch1-1, Yay and Calamares 3.2.17 installer – Build 200930

30
Sep
2020

NEWS about ArchEX 200930
A new version of ArchEX is ready! In this new version, which I call ArchEX 2020, I have added the Deepin 20 BETA (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 20.5 . So I thought why not install Deepin also in ArchEX?

REPLACEMENT
This version (200930) of ArchEX replaces version 200914, which couldn’t run on UEFI computers. I’ve also replaced Yaourt with Yay – Yet Another Yogurt – An AUR Helper Written in Go. I came to know that Yaourt is dead. I.e. Yaourt is not being developed anymore. So in the new version of ArchEX I have fixed the UEFI matter, upgraded all included packages, installed a new kernel (5.8.12 – latest stable kernel by 200930) and replaced Yaourt with Yay.

Study all installed packages in ArchEX 2020 Deepin/LXQt.

SCREENSHOTS
ArchEX Deepin Desktop
ArchEX Deepin full Desktop
ArchEX running LXQt – just change from Deepin to LXQt before you log in
ArchEX using Yay

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd 10 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments Exton Linux SystemsLinux

RaspArch Rpi4 Build 200304 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install using Rufus 3.9, Win32 Disk Imager or Etcher in Windows!

04
Mar
2020

RaspArch Build 200304 especially for the new Raspberry Pi 4 released 190624
This version (200304) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

NEWS in RaspArch Build 200304
A new kernel – 4.19.106-1-ARCH. All included packages have been updated to the latest version as of 200304. I have added support for Yaourt – a Pacman Fronted. I have also installed PulseAudio. Finally the sound works very well in RaspArch. Nice if you like YouTube. I’ve also replaced Wicd with NetworkManager. It works better. Note1: To be able to install Yaourt I had to install a lot of development tools. Note2: Some people say that Yaourt is outdated. It should be replaced by Yay – yet another Yaourt.

Compatibility :: March 2020
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 4 computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspEX Kodi, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, RaspAnd Pie, EXTON OpSuS Rpi, FedEX Rpi3 and RaspArch. I have until now (200304) only upgraded RaspEX, RaspEX Kodi, RaspArch and RaspEX with OpenCPN. Read about the new Raspberry Pi 4.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – YouTube running
Screenshot 3 – Yaourt running (while installing Geany)
Screenshot 4 of RaspArch’s Desktop – logged in as root
Screenshot 5 – Samba connection to a Windows computer
Screenshot 6 – some system INFO when running RaspArch
Screenshot 7 – showing that you can watch 4K videos using Firefox

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

2 Comments extonExton Linux SystemsRaspberry Pi
1 2 3