Tag: Raspberry Pi 4

RaspAnd 12 (Android 12) for Raspberry Pi 4 with Google Play Services, Spotify, Bluetooth, F-Droid Store, AIDA64, Firefox and Clash of Clans pre-installed :: Build 220419

ABOUT RaspAnd 12 – Build 220419
RaspAnd 12 runs very well on a Raspberry Pi 4. I.e. the system is pretty responsive if you use a micro SD card of good quality. RaspAnd 12 has the following apps pre-installed: Google Play Services (and some other Google apps), Spotify, Firefox Browser (so you can watch YouTube), F-Droid (Free and Open Source App Repository), Clash of Clans and Aida64. You’ll need Google Play Services for some games to work. Among them Clash of Clans.

ABOUT Android 12, which was released 211004…
Read also an article about The Evolution of Android – List of Android Versions and Release Dates.

PLEASE NOTE that you must be aware of the fact that the Raspberry Pi 4 computer has its limitations and that Android 12 is a very advanced Linux system. Having said that I must also say that the apps I have included in this Build (see above) work very well.

SCREENSHOTS
1. Your first screen after boot
2. Your second screen after boot – you must choose to set up your Network connection offline
3. Your third screen after boot – choose your language (works very well)
4. The Desktop with all pre-installed apps
5. F-Droid running
6. Spotify running
7. Termux running (installing Android Debug Bridge – adb/Android Tools)
8. Clash of Clans running
9. A Chess game running
10. AIDA64 running and showing the system features

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments AndroidextonExton Linux SystemsRaspberry Pi

RaspEX Rpi4 based on upcoming Ubuntu 22.04 LTS “Jammy Jellyfish” with LXDE, kernel 5.15.24-exton-v7l+, Raspotify, RealVNC, PuTTy, Samba and Bluetooth :: Build 220228

NEWS 220228 about RaspEX with LXDE based on upcoming Ubuntu 22.04 LTS Jammy Jellyfish.
I have upgraded the whole system and replaced the old kernel 5.10.87-exton-v7l+ with kernel 5.15.24-exton-v7l+. RaspEX Build 220228 is a Linux ARM (32bit) system for Raspberry Pi 4 with 2GB/4GB/8GB RAM and Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B. It is based on Debian, Ubuntu 22.04 LTS and Linaro (Open Source software for ARM SoCs). Both Firefox and Chromium Browser are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 220228.

Most IMPORTANT News/Changes in Build 220228
1. I have installed an old version of Chromium with DRM/Widevine support, which means that you can watch Netflix (and possibly also HBO, YouTube TV, Amazon Prime Video, etc.) using the Chromium Browser. I did that following the instructions here.
2. In this build of RaspEX you can also run Chromium/Firefox logged in as root. You will have sound, which you normally won’t have as root on Debian/Ubuntu systems.

SCREENSHOTS
Screenshot 1 – raspex’s Desktop 220228
Screenshot 2 – root’s Desktop 220228
Screenshot 3 – running Netflix in Chromium
Screenshot 4 – showing that hardware acceleration is enabled
Screenshot 5 – showing how to configure sound using Pavucontrol

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux SystemsRaspberry Pi

RaspArch Rpi4 Build 220216 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.17, Win32 Disk Imager or Etcher in Windows!

RaspArch Build 220216 especially for the new Raspberry Pi 4 released in May 2020
This version (220216) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

RaspEX Rpi4 based on upcoming Ubuntu 22.04 LTS “Jammy Jellyfish” with LXDE, kernel 5.10.87-exton-v7l+, Raspotify, RealVNC, PuTTy, Samba and Bluetooth :: Build 211221

NEWS 211221 about RaspEX with LXDE based on upcoming Ubuntu 22.04 LTS Jammy Jellyfish.
I have upgraded the whole system and replaced the old kernel 5.4.83-exton-v7l+ with kernel 5.10.87-exton-v7l+. RaspEX Build 211221 is a Linux ARM system for Raspberry Pi 4 with 2GB/4GB/8GB RAM and Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B. It is based on Debian, Ubuntu 22.04 LTS and Linaro (Open Source software for ARM SoCs). Both Firefox and Midori Private Browser are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 211221.

More about RaspEX

RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) with many other useful programs pre-installed. Firefox is used as Web Browser and Synaptic as Package Manager. You can use Samba and RealVNC to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Kernels
Kernel 5.10.87-exton-v7l+ (for Rpi 4) and 5.10.87-exton-v7+ (for Rpi 3/2) are used in Build 211221.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Bullseye) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. If you use the new Raspberry Pi 4 RaspEX will run even faster!

SCREENSHOTS
Screenshot 1 – raspex’s Desktop 211221
Screenshot 2 – root’s Desktop 211221
Screenshot 3 – running YouTube in Firefox
Screenshot 4 – RaspEX connected to Windows 10 via PuTTy
Screenshot 5 – RaspEX “running on” Windows 10 with VNC-viewer
Screenshot 6 – RaspEX using Pavucontrol (for sound control)
Screenshot 7 – RaspEX running Raspotify

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

Yet another version of RaspEX Kodi 64-bit :: Now based on Debian 11 stable with the LXQt Desktop and Kodi 19.1 “Matrix” stable – Build 210904

NEWS 210904 about RaspEX Kodi 64-bit
I’ve made a new extra version of RaspEX Kodi 64-bit. This version is based on Raspbian (Raspberry Pi OS) and Debian Bullseye (Debian 11 stable). The LXDE Desktop is replaced with LXQt 0.16.0 which has a more “modern look” than LXDE. Historically, LXQt is the product of the merge between LXDE-Qt, an initial Qt flavour of LXDE, and Razor-qt, a project aiming to develop a Qt based desktop environment with similar objectives as the current LXQt. In RaspEX Kodi Build 210904 I’ve upgraded Kodi to version 19.1 Matrix since it has reached the “stable stage”. You can now much easier install extra repositories. Read about the best Kodi repos 2021.

NOTE: Build 210904 (64-bit) is missing the Netflix addon. Widevine CDM (which is necessary for Netflix to work) is not available natively on ARM64.

Boot problems as regards RaspEX Kodi Build 210904

If you can’t boot up the system after installing to the SD card using Rufus 3.15 in Windows it’s because the files /boot/cmdline.txt and /etc/fstab has the wrong content. I.e. the PARTUUID for the card is wrong. Then you’ll have to edit said files. Do it like this.
1. Start up a Linux system (Ubuntu or…).
2. Insert your SD card with RaspEX Kodi installed. It will be seen as /dev/sdb1 (boot partition) and /dev/sdb2 (root filesystem).
3. To find out the correct PARTUUID for /dev/sdb1 and /dev/sdb2 run the command blkid /dev/sdb1 respectively blkid /dev/sdb2
4. Now change to the correct PARTUUID in /boot/cmdline.txt and /etc/fstab on the SD card. Use Leafpad or Mousepad for that. Never LibreOffice writer!

The file cmdline.txt can look like this:
console=serial0,115200 console=tty1 root=PARTUUID=347a28ab-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

The file fstab can look like this:
proc /proc proc defaults 0 0
PARTUUID=347a28ab-01 /boot vfat defaults 0 2
PARTUUID=347a28ab-02 / ext4 defaults,noatime 0 1
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that

Study all installed packages in Build 210904…

Log in to LXQt or Kodi
After the boot process is ready you will end up at LightDM‘s login screen. It will look like this – see below. Log in as pi with password raspberry or as root (“other”) with password root. You can log in to Kodi directly from LightDM if you want. While inside LXQt you can change to the Kodi Desktop environment. You can run Kodi on the LXQt Desktop like any other program or run it in full screen. Just change Kodi’s Settings from Windowed to Fullscreen. Watch this screenshot.

Expand the filesystem on the SD card
If you install many new big programs and/or download large files (for example videos) you may run out of space on the SD card. That is best fixed by running the following command: sudo raspi-config. Click on “Advanced Options” and choose A1 Expand Filesystem.
NOTE: That’s all you have to do. Just wait for the script to fix everything. If you use a SD card of 64 GB all the space on it will be used afterwards. Watch a screenshot when raspi-config is running.
1. Screenshot showing filesystem size before resizing
2. Screenshot showing filesystem size after resizing

API and Authentication keys
Google and Netflix make it more and more difficult to use the YouTube and Netflix addons in Kodi. They demand API and Authentication keys. As regards YouTube I’ve managed to solve the problem permanently. As regards Netflix you’ll have to create your Authentication key yourself. (Not as regards this version of RaspEX Kodi, since the Netflix addon can’t be used – see above).
Follow this instruction.
1. Read this INFO site. Then do this:
2. Download NFAuthenticationKey_Linux.zip
3. unzip NFAuthenticationKey_Linux.zip
4. cd NFAuthenticationKey_Linux
5. Run the script with the command python3 NFAuthenticationKey.pyscreenshot
6. Follow the instructions on the screen and save your Authentication key in /home/pi
7. Remember to take a note of the created four-digit PIN code
8. Open the Netflix addon in Kodi and choose to login with the the Authentication key you have created – screenshot
9. Find your Authentication key in /home/pi – screenshot
10. Give Netflix you password – done! – screenshot.

Your monitor/screen resolution
If you experience problems with the screen resolution you may have to make some changes in /boot/config.txt. The eight last lines in /boot/config.txt have the following content.
## exton
# Enable DRM VC4 V3D driver
# dtoverlay=vc4-fkms-v3d
dtoverlay=vc4-fkms-v3d,cma-344
max_framebuffers=2
arm_64bit=1
enable_uart=1
## exton end
My screen resolution is 3440×1440. If you have for example 1920×1080 you should change the line dtoverlay=vc4-fkms-v3d,cma-344 to dtoverlay=vc4-fkms-v3d,cma-192.

Used kernels

5.10.60-exton-v8l+ (for Rpi 4) and 5.10.60-v7+ (for Rpi 3 and 2).

Compatibility :: September 2021
Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 4 computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, exGENT, RaspEX BunsenLabs, RaspEX Kodi, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1, RaspAnd Pie, RaspAnd 10, RaspAnd 11 Build 210321, EXTON OpSuS Rpi, FedEX Rpi3 and RaspArch. I have until now (210321) only upgraded RaspAnd 11, RaspAnd 10, RaspEX, RaspEX Kodi, RaspArch, exGENT and RaspEX with OpenCPN. Read about the new Raspberry Pi 4.

SCREENSHOTS
1. The LXQt Desktop running as user pi
2. The LXQt Desktop running as root

3. Kodi 19.1 system info
4. Kodi running showing some addons. (The Diamond Wizard repository is not included)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

Yet another version of RaspEX Kodi 32-bit :: Now based on Debian 11 stable with the LXQt Desktop and Kodi 19.1 “Matrix” stable with the Netflix addon – Build 210829

NEWS 210829 about RaspEX Kodi
I’ve made a new extra version of RaspEX Kodi 32-bit. This version is based on Raspbian (Raspberry Pi OS) and Debian Bullseye (Debian 11 stable). The LXDE Desktop is replaced with LXQt 0.16.0 which has a more “modern look” than LXDE. Historically, LXQt is the product of the merge between LXDE-Qt, an initial Qt flavour of LXDE, and Razor-qt, a project aiming to develop a Qt based desktop environment with similar objectives as the current LXQt. In RaspEX Kodi Build 210829 I’ve upgraded Kodi to version 19.1 Matrix since it has reached the “stable stage” . It was therefore now possible to install the Netflix addon among many other addons. You can now also much easier install extra repositories. Read about the best Kodi repos 2021.

Study all installed packages in Build 210829…

SCREENSHOTS
1. The LXQt Desktop running as user pi
2. The LXQt Desktop running as root
3. Kodi 19.1 system info
4. Kodi running showing some addons
5. Netflix addon running
6. The Authentication key for the Netflix addon is created

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux SystemsLinuxRaspberry Pi

RaspAnd 11 (Android 11) for Raspberry Pi 4 with GAPPS (Google Play Store), Netflix, Spotify, Bluetooth, Aurora Store and Clash of Clans pre-installed :: Build 210321

ABOUT RaspAnd 11 – Build 210321 – with GAPPS
RaspAnd 11 runs very well on a Raspberry Pi 4. I.e. the system is pretty responsive if you use a micro SD card of good quality. RaspAnd 11 has the following apps pre-installed: GAPPS (Google Play Store and other Google apps), Netflix, Spotify, Midori Browser, Aurora Store, Clash of Clans and AIDA64.

ABOUT Android 11, which was released 200908…

PLEASE NOTE that you must be aware of the fact that the Raspberry Pi 4 computer has its limitations and that Android 11 is a very advanced Linux system. Having said that I must also say that the apps I have included in this Build (see above) work very well. The max screen resolution is 1680×1050. With higher resolutions Netflix won’t work.

NOTE also that you’ll have to register “your device” (i.e. your Rpi4) before you can log in to Google Play Store. Please read my instructions at the INFO site about how to register so that your device will be Play Protect Certified.

About Raspberry Pi 4
This build (RaspAnd 11 210321) works very well on the new Raspberry Pi 4. I used the latest model with 8GB RAM, but you can of course use the other models too.

SCREENSHOTS
1. The Desktop with GAPPS, Netflix and Spotify pre-installed
2. The Desktop using Microsoft Launcher – not pre-installed
3. The Desktop using Galaxy 21 Launcher – not pre-installed
4. Asphalt 9 running – not preinstalled
5. Google Play Store running
6. Netflix running
7. Spotify running
8. Running Hunting Clash – not pre-installed
9. The Desktop using Computer Launcher – not pre-installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments AndroidextonExton Linux SystemsRaspberry Pi

RaspAnd 11 (Android 11) for Raspberry Pi 4 with Netflix, Spotify, Bluetooth, Firefox and F-Droid working very well :: Build 210309

ABOUT RaspAnd 11 – Build 210309
RaspAnd 11 runs very well on a Raspberry Pi 4. I.e. the system is pretty responsive if you use a micro SD card of good quality. RaspAnd 11 has the following apps pre-installed: Netflix, Spotify, SVTPlay, Termux, Firefox, F-Droid, and Aida64. Unfortunately not Google Play Store, but F-Droid works as good replacement for it. You can also download APK files (Android packages) and install them. Normally without problems.

ABOUT Android 11, which was released 200908…

About Raspberry Pi 4
This build (RaspAnd 11 210309) works very well on the new Raspberry Pi 4. I used the latest model with 8GB RAM, but you can of course use the other models too.

MORE NEWS 210309 ABOUT RaspAnd 11
RaspAnd 11 can be installed to a Micro SD card (preferable a class 10 card) in Windows 10 using Rufus, Win32 Disk Imager or Etcher. You can alternatively (of course) use the dd-command in a Linux system.

SCREENSHOTS
1. The Desktop with Netflix and Spotify installed
2. Aida64 running showing the system info
3. YouTube running in Firefox
4. Netflix running
5. Spotify running
6. Clash of Clans running (the app is not pre-installed)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

Yet another version of RaspEX Kodi 32-bit :: Now with the LXQt Desktop and Kodi 19 “Matrix” stable with the Netflix addon – Build 210301

NEWS 210301 about RaspEX Kodi
I’ve made a new extra version of RaspEX Kodi 32-bit. This version is based on Raspbian (Raspberry Pi OS) and Debian Bullseye (upcoming Debian 11). The LXDE Desktop is replaced with LXQt 0.16.0 which has a more “modern look” than LXDE. Historically, LXQt is the product of the merge between LXDE-Qt, an initial Qt flavour of LXDE, and Razor-qt, a project aiming to develop a Qt based desktop environment with similar objectives as the current LXQt. In RaspEX Kodi Build 210301 I’ve upgraded Kodi to version 19.0 Matrix since it has reached the “stable stage” . It was therefore now possible to install the Netflix addon among many other addons. You can now also much easier install extra repositories. Read about the best Kodi repos 2021.

Boot problems as regards RaspEX Kodi Build 210301

If you can’t boot up the system after installing to the SD card using Rufus 3.13 in Windows it’s because the files /boot/cmdline.txt and /etc/fstab has the wrong content. I.e. the PARTUUID for the card is wrong. Then you’ll have to edit said files. Do it like this.
1. Start up a Linux system (Ubuntu or…).
2. Insert your SD card with RaspEX Kodi installed. It will be seen as /dev/sdb1 (boot partition) and /dev/sdb2 (root filesystem).
3. To find out the correct PARTUUID for /dev/sdb1 and /dev/sdb2 run the command blkid /dev/sdb1 respectively blkid /dev/sdb2
4. Now change to the correct PARTUUID in /boot/cmdline.txt and /etc/fstab on the SD card. Use Leafpad or Mousepad for that. Never LibreOffice writer!

The file cmdline.txt can look like this:
console=serial0,115200 console=tty1 root=PARTUUID=347a28ab-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

The file fstab can look like this:
proc /proc proc defaults 0 0
PARTUUID=347a28ab-01 /boot vfat defaults 0 2
PARTUUID=347a28ab-02 / ext4 defaults,noatime 0 1
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that

Study all installed packages in Build 210301…

Log in to LXQt or Kodi
After the boot process is ready you will end up at LightDM‘s login screen. It will look like this – see below. Log in as pi with password raspberry or as root (“other”) with password root. You can log in to Kodi directly from LightDM if you want. While inside LXQt you can change to the Kodi Desktop environment. You can run Kodi on the LXQt Desktop like any other program or run it in full screen. Just change Kodi’s Settings from Windowed to Fullscreen. Watch this screenshot.

Expand the filesystem on the SD card
If you install many new big programs and/or download large files (for example videos) you may run out of space on the SD card. That is best fixed by running the following command: sudo raspi-config. Click on “Advanced Options” and choose A1 Expand Filesystem.
NOTE: That’s all you have to do. Just wait for the script to fix everything. If you use a SD card of 64 GB all the space on it will be used afterwards. Watch a screenshot when raspi-config is running.
1. Screenshot showing filesystem size before resizing
2. Screenshot showing filesystem size after resizing

Used kernels
5.10.17-exton-v7l+ (for Rpi 4) and 5.10.11-v7+ (for Rpi 3 and 2).

SCREENSHOTS
1. The LXQt Desktop running as user pi
2. The LXQt Desktop running as root

3. Kodi 19.0 system info
4. Kodi running on/within the LXQt Desktop
5. Kodi showing some addons
6. NBC Sport addon running
7. NASA addon running
8. Netflix addon running
9. Kodi running using a special skin

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi

RaspEX Kodi 32-bit with LXQt Desktop and Kodi 18.7 with the Netflix addon – Build 210211

NEWS 210211 about RaspEX Kodi
I’ve made a new extra version of RaspEX Kodi 32-bit. This version is based on Raspbian (Raspberry Pi OS) and Debian Bullseye (upcoming Debian 11). The LXDE Desktop is replaced with LXQt, which has a more “modern look” than LXDE. Historically, LXQt is the product of the merge between LXDE-Qt, an initial Qt flavour of LXDE, and Razor-qt, a project aiming to develop a Qt based desktop environment with similar objectives as the current LXQt. In RaspEX Kodi Build 210211 I’ve kept Kodi at version 18.7 (stable). It was therefore possible to install the Netflix addon among many other addons. With Kodi 18.7 it is also easier to install extra repositories. Read about the best Kodi repos 2021.

Study all installed packages in Build 2102111…

Used kernels
5.10.14-exton-v7l+ (for Rpi 4) and 5.10.13-exton-v7+ (for Rpi 3 and 2).

SCREENSHOTS
1. The LXQt Desktop
2. Kodi 18.7 system info
3. Showing extra repos (not pre-installed)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
No Comments extonExton Linux SystemsRaspberry Pi