Tag: RaspArch

RaspArch Build 161205 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2 computer

rasparch-logoThis version (161205) is my fourth build of RaspArch
The first version is from 150414. The second is from 151107. The third is from 160312 specially made for the new Raspberry Pi 3. This version (161205) and version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased to 700 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B or Pi 2 computer.

NEWS in RaspArch Build 161205
A new kernel – 4.4.35-1-ARCH. All included packages have been updated to the latest version as of 161205. I have added support for Yaourt – a Pacman Fronted. I have also installed PulseAudio. Finally the sound works alright in RaspArch. Nice if you like YouTube. Note: To be able to install Yaourt I had to install a lot of development tools. In the first place I installed Yaourt to be able to install Google Chrome (only to learn that Google Chrome isn’t available for the ARM architecture).

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 4.4.35-1-ARCH and the LXDE Desktop environment.

BENEFITS of Arch Linux/RaspArch

“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop – YouTube and PulseAudio Control running
Screenshot of RaspArch’s Desktop – YouTube and Alsamixer running

READ MORE…

3 Comments extonExton Linux SystemsLinuxRaspberry

RaspArch Build 160312 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2

rasparch-logoThis version (160312) is my third build of RaspArch
The first version is from 150414. The second is from 151107. This version (160312) is especially made for the new Raspberry Pi 3. Version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 558 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B  or Pi 2 computer.

UPGRADE RaspArch
If you have downloaded and installed my previous version of RaspArch from 151107 you can still use the Micro SD Card with RaspArch on the new Raspberry Pi 3 after a full upgrade of the system. Commands: pacman -Sy followed by pacman -Syu. Most important the old kernel will automatically be replaced by kernel 4.1.19-4-ARCH.

What is Raspberry Pi?

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

WHO should run Arch Linux/RaspArch?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

rasparch-screenshot-desktop-small

BENEFITS of Arch Linux/RaspArch
“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

Raspberry Pi 3 Model B

raspberry-logoNEWS from Raspberrypi.org
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers. I have (of course) bought one and from my experience I must agree.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. I will start with RaspEX.

raspberrypi3-20160304-small

No Comments Exton Linux SystemsLinuxRaspberry

RaspArch Build 151107 :: Run Arch Linux on your Raspberry Pi 2

rasparch-logoThis version (151107) is my second build of RaspArch
The first version is from 150414. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 492 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 2 computer.

NEWS 151107
A new version of RaspArch is ready. The compressed file rasparch-exton.tar.gz from 151105 was compressed with Archive Manager in Ubuntu 15.10. Something is wrong with this program. I had to compress the folder manually. I.e. using the command tar -zcvf rasparch-exton.tar.gz rasparch-exton. The compressed folder has decreased in size from 851 MB (151105) to 492 MB(!?).

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 4.1.12-1-ARCH and the LXDE Desktop environment.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

rasparch-desktop-151105-small

BENEFITS of Arch Linux/RaspArch
“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspArch :: Run Arch Linux on your Raspberry Pi 2

rasparch-logoRaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 665 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 2 computer.

model-b-plus-300x225

Raspberry Pi model B made in February 2015. It has a 900MHz quad-core ARM Cortex-A7 CPU and 1GB RAM. Read more…

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 3.18.11-2-ARCH and the LXDE Desktop environment.

WHO should run Arch Linux?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of Arch Linux
“Cutting Edge”-software and speed.

Screenshot of RaspArch’s Desktop

READ MORE…

No Comments AndroidExton Linux SystemsRaspberry