Tag: VirtualBox Guest Additions

ArchEX (Arch Linux) “Mini” with LXQt 1.1.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.19.6 (latest) :: Build 220904

04
Sep
2022

NEWS ABOUT ArchEX 220904
I’ve made a new extra “Mini” version of ArchEX. It has four advantages compared with ArchEX Build 220901.

A) This ArchEX build is smaller. The ISO file is “only” of 1740 MB compered with Build 220901 which is of 4010 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220904. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220904 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220904 (and Build 220901). Watch this screenshot. In Qemu you can just choose the screen resolution you want.

D) ArchEX Build 220904 uses kernel 5.19.6 (latest) and has support for more wireless cards. Kernel modules ath10k and wl are loaded also when running ArchEX live, which obviously means a lot.

Study all installed packages in Build 220904…

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini installing LibreOffice while running live
4. Installing Arch Linux the Arch way

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux Systems

ArchEX (Arch Linux) Live with Deepin 20.7, GNOME 42, Gnome Classic, LXQt 1.1.0, LXDE, kernel 5.19.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220905 and 220904

01
Sep
2022

NEWS ABOUT ArchEX 220905
Today I discovered that I had forgot to add “cowspace” (sudo mount -o remount,size=2G /run/archiso/cowspace) in ArchEX Build 220901. I therefore had to upload a new ArchEX version today (220905). This version uses kernel 5.19.6 and has more support for various wireless cards.

NEWS about ArchEX 220901
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.7 (latest) Desktop Environment (DE). Deepin DE (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin DE very much when I installed it in ExTiX 22.6. So I thought why not install Deepin DE also in ArchEX? Furthermore I have added the GNOME 42 (latest) and LXQt 1.1.0-1 (latest) Desktop environments. As “extra” Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive! Note that you can run ArchEX in full screen in VirtualBox directly from the ISO file since VirtualBox Guest Additions are pre-installed!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 42/Gnome Classic/LXQt/LXDE.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.  You can very easy install ArchEX to hard drive in any language using Calamares Installer. Also in VirtualBox/VMware without any hassle.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 42 Desktop
ArchEX LXQt Desktop
ArchEX LXDE Desktop
ArchEX Gnome Classic Desktop
ArchEX Deepin full Desktop running in VMware

READ MORE…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExTiX 22.8 – “The Ultimate Linux System” – based on Ubuntu 22.04.1 LTS with LXQt 0.17, Refracta Snapshot and kernel 5.19.0-amd64-exton :: Build 220814

14
Aug
2022

ExTiX 22.8 LXQt – Build 220814
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 22.8 LXQt Live DVD. (The previous LXQt version was 21.11 from 211030). ExTiX 22.8 is based on Ubuntu 22.04.1 LTS (Jammy Jellyfish)! Ubuntu 22.04 will be supported until 2027. The best thing with ExTiX 22.8 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! One other very good thing with this version of ExTiX is that it is quite light. The ISO file is of only 1820 MB, which means that you can run the system super fast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 3 or Advanced options… >> load to RAM.

ABOUT
ExTiX 22.8 LXQt DVD 64 bit is based on Debian Sid and Ubuntu 22.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.17. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

The system language is ENGLISH.

SCREENSHOTS
1. ExTiX LXQt – root’s Desktop
2. ExTiX LXQt – live’s Desktop
3. WiFi connection
4. ExTiX 22.8 running in full screen in VirtualBox

READ MORE…

 

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

PuppEX Bookworm64 with Tint2 as DE :: Build 220807

03
Aug
2022

NEWS ABOUT PuppEX Bookworm64 Build 220807
My new Puppy Linux derivative is built using the Bookworm Build Script. It is compatible with Debian Bookworm – upcoming Debian 12. This version of PuppEX uses Tint2 as Desktop environment (DE). It is for UEFI computers and non-UEFI computers. This PuppEX version runs very well in VirtualBox/VMware. You can run it in full screen in VirtualBox, since VirtualBox Guest Additions are pre-installed. Watch this screenshot…

Debian 12
Compatible with Debian 12 means that you can use the apt command. (apt update, apt upgrade, apt install MyUsefulPackage etc) and Synaptic for installing thousands of new Debian packages in PuppEX. All PuppEX Bookworm64 versions can easily be installed manually to hard drive if you have at least one Linux system installed. You must also use Grub as boot loader. Read more about how to do that at the INFO site.

SCREENSHOTS
1. PuppEX Bookworm64 running in full screen in VirtualBox
2. Connection to a wireless network
3. root’s desktop – Tint2
4. puppy’s desktop – Tint2
5. Using CIFS to reach Windows shares

READ MORE or download the ISO right away from the Swedish Linux Society’s server…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExLight 64bit UEFI, Build 220726, based on Debian “Sid” (unstable/development) with Enlightenment 0.25.3 (latest) as DE, Refracta Snapshot and Calamares Installer

26
Jul
2022

NEWS 220726 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.25.3 Desktop environment, Refracta Snapshot (create your own Debian Sid System) and Calamares 3.2.60-1 Installer Framework. The very nice Enlightenment theme e25 Neonz is used.

KERNEL
ExLight Build 220726 uses Debian’s original kernel 5.18.0-2-amd64.

VirtualBox and VMware
ExLight Build 220726 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe). You can use Calamares Installer also in VirtualBox and VMware without any problems.VirtualBox Guest Additions are pre-installed. Watch a screenshot when ExLight is running in full screen in VirtualBox.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is ExLight.

SCREENSHOTS
1. The Enlightenment 0.25.3 Desktop for user user
2. The Enlightenment 0.25.3 Desktop for root running Refracta Snapshot
3. Running ExLight in full screen in VirtualBox
4. Using NetworkManager for WiFi connections
5. Refracta Snapshot has started
6. Running Calamares Installer

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

No Comments extonExton Linux Systems

Run latest Slackware 64 bit (15.0 STABLE) live and create your own live installable Slackware 15.0 system with Refracta Snapshot!

18
May
2022

About SlackEX 15.0 64 bit Build 220518 (Xfce4), Build 220117 (Enlightenment/Xfce4) and Build 220110 (LXQt)

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX BUILD 220518 with the Xfce4 DESKTOP
A new version of SlackEX is ready. It is based on Slackware 15.0 STABLE released 220202 with Xfce4 as DE. The most important package installed is Refracta Snapshot. With that you can build your own Slackware 15.0 distribution. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. Kernel 5.17.7-amd64-exton is used in this SlackEX Build. To be able to use Refracta Snapshot you’ll have to use said kernel. Otherwise you can (of course) replace “my” kernel with Slackware’s original kernel. Study the full package LIST.

Update/Upgrade from RC2 or RC3
As regards my other two SlackEX Builds you can easily upgrade the systems to Slackware 15.0 stable. Just run the command sudo slackpkg update followed by sudo slackpkg upgrade-all.

SCREENSHOTS
Screenshot 1 – root’s Desktop with Xfce4 as DE
Screenshot 2 – SlackEX running in VirtualBox in full screen when Guest additions have been installed

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

DebEX (Debian testing/unstable) with Gnome 41, Refracta Snapshot, Calamares Installer and kernel 5.16.11-exton :: Build 220302

02
Mar
2022

About DebEX Gnome Build 220302
I have made a new extra version of DebEX, which I call DebEX Gnome Live DVD. It’s a pure Debian system using the testing (Bookworm) and unstable (sid) repositories. Gnome 41 is used as Desktop environment. I have removed the Mate Desktop, since Gnome now can be used on all kind of computers. Also when running DebEX in VirtualBox and VMware. No need for Nvidia’s proprietary graphics drivers when running this new version of DebEX. You can of course install such drivers if you want to. Furthermore I have replaced Google Chrome with Firefox ESR. It is now possible to watch Netflix movies using Firefox ESR in Linux. I have also replaced Refracta Installer with Calamares Installer, which makes it possible to install DebEX Gnome in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. All installed packages have been updated to the latest version as of 220302. DebEX Gnome uses kernel 5.16.11-exton corresponding Kernel.org’s second latest kernel 5.16.11.

THE REAL McCoy
DebEX is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian testing/unstable. So is DebEX.

Rolling distribution
Debian/DebEX are rolling distributions, which implies that once you have installed the system on the hard drive there is no need for re-installations (which otherwise is common in the Linux world).

Screenshots
1. The Gnome Desktop – DebEX running in VirtualBox with VirtualBox Guest Additions pre-installed
2. DebEX Gnome – root’s Desktop
3. Running in Qemu – the best way to run a Linux system virtually
4. Calamares Installer has started while running DebEX as root

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ArchEX (Arch Linux) “Mini” with LXQt 1.0.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.16.7 :: Build 220212

12
Feb
2022

NEWS ABOUT ArchEX 220212
I’ve made a new extra “Mini” version of ArchEX. It has three advantages compered with ArchEX Build 220206.

A) This ArchEX build is smaller. The ISO file is “only” of 1760 MB compered with Build 220206 which is of 3670 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220212. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220212 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220212. Watch this screenshot. In Qemu you can just choose the screen resolution you want.

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini running Samba
4. ArchEX Mini installing LibreOffice while running live

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

PuppEX Focal64 Linux Live DVD with kernel 5.16.2-exton and VirtualBox Guest Additions :: Build 220201

02
Feb
2022

ABOUT PuppEX Focal64 Build 220201
This Puppy derivative is built from Puppy Linux 9.5 FossaPup64. I have added PCManFM and LXterminal. Also many development tools. Furthermore I have compiled a new kernel – 5.16.2-exton and pre-installed VirtualBox Guest Additions. Watch a screenshot when PuppEX is running in full screen in VirtualBox. PuppEX Focal64 (both versions) are compatible with Ubuntu 20.04 (Focal Fossa), which means that Ubuntu packages for Ubuntu 20.04 LTS can be installed and used in PuppEX. Ubuntu 20.04 LTS will be supported until April, 2025.

NOTE1: For some unknown reason PuppEX Build 220201 won’t boot on newer UEFI computers. It works well on older computer though. I have therefore kept the old PuppEX version from 201119, which can run on all “normal” computers.

NOTE1: The good thing about PuppEX Build 220201 is that you can run it very well on older non-UEFI computers, VirtualBox, VMware and Qemu. You can also do a manual installation to any computer provided that you have at least one Linux system installed and use Grub as bootloader. Do it like this.
1. Extract everything in the PuppEX ISO to a folder in the root (/) of your existing Linux system. Watch this screenshot.
2. Then just add boot lines for PuppEX in /etc/grub.d/40_custom or /boot/grub/grub.cfg. Watch this screenshot and this example of a 40_custom-configuration.
3. You can/should also read my instruction How to dual-boot, triple-boot or multi-boot Linux with Windows in a simple way and be happy...

Study ALL installed packages in PuppEX Focal64 – 220201

SCREENSHOTS
1. PuppEX Focal’s Desktop – 220201
2. PuppEX Build 220201 running in full screen in Qemu
3. PuppEX Build 220201 running in full screen in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
No Comments extonExton Linux Systems

ExTiX Deepin 22.1 Live based on Deepin 20.3 (latest) with Skype, Spotify, Refracta Snapshot and kernel 5.16.0-exton :: Build 220114

15
Jan
2022

NEWS 220114 ABOUT ExTiX Deepin
I’ve released a new version of ExTiX Deepin today (220114). This ExTiX Build is based on Deepin 20.3 released by Deepin Technology 211123.

NEW FUNCTIONS etc
1. You can run ExTiX from RAM. Use boot alternative 2 (load to RAM) or Advanced. A wonderful way to run Linux if you have enough RAM. Everything will be super fast. When ExTiX has booted up you can remove the DVD or USB stick.
2. You will have the opportunity to choose language before you enter the Deepin 20.3 Desktop. All main languages are supported.
3. I have replaced Deepin Installer with the Reborn version of Deepin Installer. Works better in every way.
4. I have replaced kernel 5.14.2-exton with kernel 5.16.0-exton. Corresponding the latest available stable kernel from Kernel.org.
5. Spotify and Skype are pre-installed.
6. You can watch Netflix while running Firefox.
7. You can install ExTiX Deepin also in VirtualBox/VMware using Refracta Installer or Deepin Installer. (In previous versions you had to “chroot” into the install partition and install Grub).
8. As an alternative to Apt you can use the Cactus Package Manager. Example commands: cpm i mousepad and cpm s gimp. (Install Mousepad and search for Gimp). CPM works very well.
9. Install ExTiX to a USB stick preferably with Rufus 3.17 in Windows – see below how it looks.
10. In version 220114 I’ve also included Refracta Installer. Use it in VirtualBox if you want to have an exact copy of ExTiX Deepin installed. You don’t have to “chroot” to install Grub. Just choose to “Copy Grub files” when asked to. Watch this screenshot.
11. VirtualBox Guest Additions are pre-installed. With those installed you can run ExTiX in full screen in VirtualBox. Watch this screenshot.

UNIQUE
I may add that there is no other live version of Deepin 20.3.

SCREENSHOTS
1. ExTiX running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. Spotify is running
3. Netflix is running in Firefox
4. ExTiX running in VMware Workstation Player in Windows in full screen after VMware Tools have been installed
5. ExTiX running in Qemu in Linux (Ubuntu). NOTE: ExTiX Deepin (and other Linux systems) runs very fast in Qemu (in Linux). Qemu is a generic and open source machine emulator and virtualizer. Superior to VirtualBox…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
1 Comment extonExton Linux Systems
1 2 3