Tag: Linux ARM

RaspArch Rpi4 Build 190809 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install using Rufus, Win32 Disk Imager or Etcher in Windows!

rasparch-logoRaspArch Build 190809 especially for the new Raspberry Pi 4 released 190624
This version (190809) is especially made for
the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

BENEFITS of Arch Linux/RaspArch

“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support AUR (I like Yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the Pi 2.

Study all installed packages in RaspArch

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop
– YouTube running
Screenshot 3 of RaspArch’s Desktop – Wicd running
Screenshot 4 – Yaourt running (while installing Geany)
Screenshot 5 of RaspArch’s Desktop – logged in as root

READ MORE…

No Comments extonExton Linux SystemsRaspberry Pi

RaspEX especially for Raspberry Pi 3 Model B+ – based on Ubuntu 18.04 LTS – with OpenCPN 4.99.0 pre-installed ::: Build 180331

RaspEX – Build 180331 based on Ubuntu 18.04 LTS – with OpenCPN 4.99.0 (latest version) – especially made for the new Raspberry Pi 3 Model B+, but it can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement.

Replacement
This build (180331) replaces build 160703. Ubuntu has been upgraded to version 18.04 LTS and OpenCPN to version 4.99.0 – latest. Build 180331 is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

ABOUT RaspEX Build 180331
RaspEX is a Linux ARM system for Raspberry Pi 3 Model B, Model B+ and Pi 2 model B. It is based on Debian Stretch (Debian 9), Bionic Beaver (Ubuntu 18.04 LTS) and Linaro (Open Source software for ARM SoCs). In this new version (180331) I’ve installed OpenCPN 4.99.0 from source. (You can’t yet find OpenCPN 4.99.0 in any software repositories).

Read this OpenCPN Review….

Raspberry Pi 3 Model 3 B+: How much better is it than the Raspberry Pi 3 Model B? The tiny computer is supposed to be faster and better in every way, including upgraded processor speed, wireless internet, and Ethernet connections.

SCREENSHOTS
1. RaspEX version 180331 running OpenCPN as the ordinary user raspex
2. RaspEX version 180331 running OpenCPN as root
3. OpenCPN 4.4.0 running on the 7″ Touchscreen Monitor for Raspberry Pi (old version OpenCPN)
4. OpenCPN 4.4.0 – Boston (old version OpenCPN)
5. OpenCPN World Map (old version of OpenCPN)
6. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
7. OpenCPN New York – Approaches to New York (old version of OpenCPN)
8. OpenCPN Stockholm Archipelago (old version of OpenCPN)

Compatibility :: March 2018
Unfortunately not all systems made for Raspberry Pi 3 Model B and 2 Model B will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2 and RaspArch. I have until now (180331) only upgraded RaspEX and RaspEX with OpenCPN. Read about the new Raspberry Pi 3 Model B+…

READ MORE…

No Comments extonExton Linux SystemsLinuxRaspberry Pi

RaspEX for Raspberry Pi 3/2 – Build 170810 – based on Ubuntu 17.04 with LXDE and kernel 4.9.41-exton-v7+

NEWS 170810 about RaspEX for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.4.49 with “my own” compiled kernel 4.9.41-exton-v7+. RaspEX Build 170810 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian 9, Ubuntu 17.04 and Linaro (Open Source software for ARM SoCs). In this new version (170810) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 170810.

Compatibility :: August 2017

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Lollipop, RaspAnd Marshmallow, RaspAnd Nougat 7.1.1, RaspAnd 7.1.2 and RaspArch. I have now (170810) upgraded all systems. Read about the new Raspberry Pi 3

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Screenshot 4 – RaspEX running Blueman (Bluetooth Manager)

Kernel
Kernel 4.9.41-exton-v7 is used.

How do I install RaspEX in Windows?
Just like any other Raspberry Pi system. I.e.: Unpack the downloaded ZIP file (raspex-ubuntu-17.04-lxde-1190mb-170810.zip) and transfer the IMAGE file (raspex-ubuntu-17.04-lxde-3050mb-170810.img) to your Micro SD card of at least 8GB. For that you shall use Win32DiskImager in Windows.

SCREENSHOTS

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC-viewer

Screenshot 4 – RaspEX running Midori Private Browser

Screenshot 5 – RaspEX using Pavucontrol (for sound)

Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

Screenshot 7 – RaspEX running the Bluetooth Manager

Screenshot 8 – The Desktop 170810

READ MORE…

1 Comment extonExton Linux SystemsLinuxRaspberry

RaspEX for Raspberry Pi 3/2 – Build 161019 – based on Ubuntu 16.10 with LXDE and kernel 4.4.21

raspberry-logoNEWS 161019 about RaspEX LXDE for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.1.20 with kernel 4.4.21. RaspEX Build 161019 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.6), Ubuntu Yakkety Yak (Ubuntu 16.10, released 161013) and Linaro (Open Source software for ARM SoCs). In this new version (161019) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 161019.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compatibility :: October 2016

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX with LXDE, RaspEX with Kodi, RaspEX with OpenCPN, RaspAnd Marshmallow, RaspAnd Lollipop and RaspArch. I have now (161019) upgraded all systems. Read about the new Raspberry Pi 3…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry Pi on “steroids“. RaspEX Build 161019 and 160426 are (of course) even faster, especially if you run the systems on a Raspberry Pi 3 computer.

SCREENSHOTS
Screenshot 1 – RaspEX connected to Windows via Samba
Screenshot 2 – RaspEX connected to Windows via PuTTy
Screenshot 3 – RaspEX “running on” Windows with VNC-viewer
Screenshot 4 – RaspEX running Midori Private Browser
Screenshot 5 – RaspEX using Pavucontrol (for sound)
Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

READ MORE…

No Comments extonLinuxRaspberry

RaspEX – Build 160307 – for the new Raspberry Pi 3

raspberry-logoNEWS 160307: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

Compatibility
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. RaspEX Build 160307 with a new kernel runs very well on Raspberry Pi 3. You can (of course) also run the new RaspEX system on a “old” Raspberry Pi 2.

NEWS 160307 ABOUT RaspEX

My first version of RaspEX is from 150318, my second from 150706 and my third one from 151027. I have now upgraded the whole system and replaced the old kernel. RaspEX Build 160307 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160307) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Softpedia review
RaspEX version 151001 was reviewed by Softpedia 151001.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry on “steroids“. RaspEX Build 160307 is (of course) even faster, especially if you run the system on a Raspberry Pi 3 computer.

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry