Category: Raspberry

RaspAnd Marshmallow 6.0.1 Build 160915 for Raspberry Pi 3/2 – faster and more responsive than ever!

raspand-marshmallow-desktop2-160915-smallRaspAnd Marshmallow Build 160915 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. Google Play Store and other GAPPS are included. This version of RaspAnd is faster and more responsive than RaspAnd Marshmallow 6.0.1 Build 160717 and (of course) RaspAnd Lollipop Build 150924/160315. Many other apps than GAPPS are pre-installed in Build 160915. I can mention Clash of Clans, Spotify, ES File Explorer, Rotation Control Pro, Terminal Emulator, Aida64, WinZip and Vlc.

ABOUT RaspAnd Marshmallow Build 160915
This new version has about the same pre-installed apps and features as in RaspAnd Marshmallow Build 160717, but it looks better, runs faster and is more responsive. Watch the slideshow below. You can run also this build (160915) using a Raspberry Pi 2 computer, but for best performance you really should use a Raspberry Pi 3. Be sure also to use a class 10 Micro SD Card.

About Aptoide App Manager and Google Play Store
I have removed Aptoide in this build (160915). I could not get Aptoide to work properly in this RaspAnd build. Google Play Store works very well though. I.e.: A lot of apps can be found and installed.

About the need to upgrade from RaspAnd Build 160717 to RaspAnd Build 160915

If you have RaspAnd Build 160717 “up and running” and everything works alright there is no real need to upgrade. I mean both versions are based on Marshmallow 6.0.1 and all included apps (GAPPS and others) gets updated all the time. RaspAnd Build 160915 runs slightly faster and looks better than Build 160717. That’s all! Note: RaspAnd Build 160717 has even one advantage over Build 160915. Namely that Aptoide App Manager is installed. Aptoide can be used to install apps not found on Google Play Store.

Screenshots
Screenshot 1 – Google Play Store running
Screenshot 2 – RaspAnd’s new Desktop

READ MORE…

1 Comment AndroidExton Linux SystemsLinuxRaspberry

RaspAnd 6.0.1 (Marshmallow) for Raspberry Pi 3 and Pi 2 Build 160717 (v. 3) with GAPPS, Wifi, Bluetooth and YouTube working

raspand-20160625-clashofclans-smallRaspAnd Marshmallow Build 160717 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. I have finally managed to include Google Play Store and other GAPPS. This version of RaspAnd is faster and more responsive than RaspAnd Lollipop Build 150924/160315.

NEWS 160717 about RaspAnd Marshmallow
Build 160717 of RaspAnd Marshmallow replaces my first version from 160625 and my second build from 160711. The screen problems in build 160625 was corrected in my second build from 160711. In this third build from 160717 also YouTube works as expected.

More about the news in Build 160717
1. Build 160717 uses a new kernel – 4.4.15-exton.
2.
Google Play Services has been upgraded from version 8.4.87 to 9.2.56. The latest version by 160717.
3. YouTube has been upgraded to version 1.3.11. The latest version by 160717. The video performance is far better in RaspAnd Marshmallow Build 3 than in previous versions. You can watch almost all movies in YouTube with acceptable quality.
4. Clash of Clans works even better in Build 3.
5. The sound quality is excellent in Build 3. Especially is you connect loudspeakers to your Rpi. Maybe because of the new kernel…
6. Bluetooth works as expected.
7. Most important: With Google Play Services in latest version (9.2.56) you are not dependent on Google Play Store. You can install almost all GAPPS and other apps via Aptoide App Manager.

Wifi and Bluetooth support
This new version of RaspAnd has support for Wifi and Bluetooth (on Raspberry Pi 3). RaspAnd runs very well on the new Raspberry Pi 3 computer. The system runs also on the “old” Raspberry Pi 2 computer.

Installed apps
The following useful apps are pre-installed in RaspAnd Marshmallow: Google Play Services 9.2.56, Google Play Store 6.0.2, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, Aida64, WinZip, ES File Explorer, Rotation Control Pro, Opera 36.2.2126, Spotify 5.6.0.674, Bluetooth File Transfer, YouTube 1.3.11 and the popular (?) game Clash of Clans 8.332.14.

YouTube performance
YouTube works alright in RaspAnd Marshmallow Build 3. You can watch almost all videos. I.e. normally you will hear the sound very well, but some the movies won’t play or play very slow with strange colors.

Spotify
Spotify works very well in RaspAnd Marshmallow. Just log in and play your favorite music!

Screenshots

Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – AIDA64 showing the system

Screenshot 4 – Clash of Clans running (very well)

Screenshot 5 – Wifi connection

Screenshot 6 – Bluetooth connection

Screenshot 7 – Setting permissions for Google Play Services

Screenshot 8 – Using ES File Explorer

Screenshot 9 – Using Opera Web Browser

Screenshot 10 – Using a big TV (55″) as monitor – Home screen

Screenshot 11 – Using a big TV (55″) as monitor – Running Spotify

Screenshot 12 – Installing the app TuneIn Radio via Google Play Store

Screenshot 13 – Installing VLC 2.0.3 via Google Play Store

READ MORE…

No Comments AndroidextonExton Linux SystemsLinuxRaspberry

RaspEX for Raspberry Pi 3/2 Build 160703 – based on Ubuntu 16.04 – with OpenCPN 4.4.0 pre-installed

raspex-16.04-opencpn-4.4.0-touchscreen-20160702-smallRaspEX – Build 160703 based on Ubuntu 16.04 – with OpenCPN 4.4.0 (latest version) – especially made for Raspberry Pi 3

OpenCPN is a free software (GPLv2) project to create a concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN is developed by a team of active sailors using real world conditions for program testing and refinement. Read about the new features in OpenCPN 4.4.0 (released 160613)…

Replacement
This build (160703) replaces build 160308. Ubuntu has been upgraded to version 16.04 and OpenCPN to version 4.4.0 – latest. Build 160703 is made especially for Raspberry Pi 3, but can also be used on Raspberry Pi 2. The Desktop environment LXDE is used. The “Lightweight X11 Desktop Environment” is an extremely fast-performing and energy-saving desktop environment. LXDE uses less CPU and less RAM than other environments. It is especially designed for cloud computers with low hardware specifications, such as netbooks, mobile devices (e.g. MIDs) or older computers.

ABOUT RaspEX Build 160703
RaspEX is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.5), Xenial Xerus (Ubuntu 16.04) and Linaro (Open Source software for ARM SoCs). In this new version (160703) I’ve installed OpenCPN 4.4.0 from source.

Read this OpenCPN Review….

Watch a YouTube video that shows the performance of OpenCPN on a Raspberry Pi…
NOTE
: Please don’t ask me technical questions about how to use OpenCPN. I’m no expert on OpenCPN. You can search the Internet for answers. There is a lot written about OpenCPN and Raspberry Pi. The Cruisers Forum (World Cruising and Sailing Wiki) is a good starting point.

The 7″ Touchscreen Monitor for Raspberry Pi
To my great joy also this version of RaspEX work together with the 7″ Touchscreen Monitor for Raspberry Pi “out of the box”. Watch this screenshot.

Installed packages
Besides from LXDE and OpenCPN a lot of ordinary Debian/Ubuntu packages are pre-installed. I can mention Firefox, Chromium Web Browser, Synaptic Package Manager and Gimp. Study the full package list of 160703…

SCREENSHOTS
1. RaspEX Build 160703 with OpenCPN 4.4.0 running using the 7″ Touchscreen Monitor for Raspberry Pi
2. RaspEX Build 160703 with OpenCPN 4.4.0 – Boston
3. RaspEX Build 160703 with Spotify and a virtual keyboard
4. RaspEX Build 160703 showing the Desktop and Network connections
5. RaspEX Build 160703 using Samba (connection with my Windows computers in my network) running
6. OpenCPN World Map (old version of OpenCPN)
7. OpenCPN Florida – Cape Canaveral (old version of OpenCPN)
8. OpenCPN New York – Approaches to New York (old version of OpenCPN)
9. OpenCPN Stockholm Archipelago (old version of OpenCPN)

Compatibility :: July 2016
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Lollipop, RaspAnd Marshmallow and RaspArch. I have now (160703) upgraded all systems. Read about the new Raspberry Pi 3…

READ MORE….

1 Comment Exton Linux SystemsLinuxRaspberry

The 7″ Touchscreen Monitor for Raspberry Pi works in RaspEX Build 160426, based on Ubuntu 16.04, with Kodi Media Center 16.0

raspex-kodi-touchscren-20160627-1-smallGreat news 160627 about RaspEX Build 160426
I got the official  7″ Touchscreen Monitor for Raspberry Pi today. I started immediately to test the touchscreen running RaspEX. To my great pleasure (and surprise) the touchscreen worked perfectly out of the box! I.e. I didn’t have to install any extra packages to make it work. According to raspberrypi.org only Raspbian OS is supposed to give full functionality without a physical keyboard or mouse.

ScreenshotRaspEX running a video in Kodi Media Center

READ MORE ABOUT RaspEX with Kodi…

No Comments extonExton Linux SystemsLinuxRaspberry

RaspAnd 6.0.1 (Marshmallow) for Raspberry Pi 3 and Pi 2 Build 160625 with GAPPS, Wifi and Bluetooth working

raspand-20160625-clashofclans-smallRaspAnd Build 160625 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. I have finally managed to include Google Play Store and other GAPPS. This version of RaspAnd is faster and more responsive than RaspAnd Lollipop Build 150924/160315.

Wifi and Bluetooth support
This new version of RaspAnd has support for Wifi and Bluetooth (on Raspberry Pi 3). RaspAnd runs very well on the new Raspberry Pi 3 computer. The system runs also on the “old” Raspberry Pi 2 computer.

Installed apps
The following useful apps are pre-installed in RaspAnd Marshmallow: Google Play Store, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, Aida64, WinZip, ES File Explorer, Rotation Control Pro, Opera 36.2.2126, Spotify 5.6.0.674, Bluetooth File Transfer, YouTube and the popular (?) game Clash of Clans.

Screenshots

Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – AIDA64 showing the system

Screenshot 4 – Clash of Clans running (very well)

Screenshot 5 – Wifi connection

Screenshot 6 – Bluetooth connection

Screenshot 7 – Setting permissions for Google Play Services

Screenshot 8 – Using ES File Explorer

Screenshot 9 – Using Opera Web Browser

READ MORE…

1 Comment AndroidExton Linux SystemsLinuxRaspberry

RaspEX Build 160426, based on Ubuntu 16.04, with Kodi Media Center 16.0 and Fluxbox

raspex-kodi-logoNEWS 160426 about RaspEX for Raspberry Pi 3 and Pi 2
In RaspEX Build 160421, based on Ubuntu 16.04, I could not include Kodi (XBMC) Media Center (a free and open-source media player software application developed by the XBMC Foundation) without removing LXDE and many other programs. Now I’ve found a solution. I was able to install Kodi 16.0 alongside Fluxbox. A Desktop environment besides Kodi is needed so you can configure your wireless network and other stuff. Study all installed packages in Build 160426.
See a screenshot when my wireless network is configured
See a screenshot when Kodi is running

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compatibility

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore had to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd and RaspArch. I have now (160426) upgraded all systems. RaspEX Build 160426, 160421 and 160402 runs very well on Raspberry Pi 3. You can (of course) also run the new RaspEX systems on a “old” Raspberry Pi 2.

NEWS 160426 ABOUT RaspEX
RaspEX Build 160426 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu (Ubuntu 16.04, released 160421) and Linaro (Open Source software for ARM SoCs). In this new version (160426) I’ve replaced LXDE Desktop environment with Fluxbox, Wicd Network Manager with Wifi-Radar and Firefox with Qupzilla. The replacements were necessary to make it possible to install Kodi Media Center 16.0.  NOTE: Kodi (XBMC) Media Center is also installed in Build 160402 based on Ubuntu 15.10.

Screenshot 1 – RaspEX Build 160426 with Fluxbox

Screenshot 2 – RaspEX Build 160426 running Kodi adding Video add-ons

Screenshot 3 – RaspEX Build 160426 running Kodi adding Picture add-ons

Screenshot 4 – RaspEX Build 160426 running Kodi – System Info

Screenshot 5 – RaspEX Build 160426 running Kodi adding Music add-ons

More about RaspEX Build 160426
RaspEX Build 160426 uses Fluxbox as Desktop environment. (Fluxbox is very light on resources and easy to handle but yet full of features to make an easy, and extremely fast, desktop experience). Furthermore Kodi (XBMC) Media Center (a free and open-source media player software application developed by the XBMC Foundation). Many other useful programs are pre-installed. Quzilla is used as Web Browser and Wifi-Radar as Network Manager. You can use Apt-get to install any extra packages you may need. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want. Please be aware of that some new installations (for example of Firefox) will break the Kodi installation).

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry

RaspEX Build 160421: Now based on Ubuntu 16.04, released today (160421)

raspberry-logoNEWS 160421 about RaspEX for Raspberry Pi 3 and Pi 2
Ubuntu 16.04 Xenial Xerus was released today. I therefore (of course) simply had to upgrade RaspEX. Unfortunately I could not get Kodi (XBMC) Media Center to work in this build. I have therefore kept the “old” version (from 160402) of RaspEX with Kodi on the servers. Study all installed packages in Build 160421.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

NEWS 160421 ABOUT RaspEX
My previous version of RaspEX is from 160402. I have now upgraded the whole system, replaced the old kernel and added support for Bluetooth. RaspEX Build 160421/160402 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu (Ubuntu 16.04/15.10, released 160421/151022) and Linaro (Open Source software for ARM SoCs). In the new versions (160421 and 160402) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube. NOTE: Kodi (XBMC) Media Center is installed only in Build 160402.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

View all installed packages in RaspEX – Build 160421

READ MORE…

No Comments Exton Linux SystemsLinuxRaspberry

RaspEX Build 160402: Now with Kodi (XBMC) Media Center, Bluetooth, Samba, SSH and VNC4Server

raspberry-logoNEWS 160402
I discovered to my horror that Build 160331 of RaspEX didn’t have support for YouTube in Kodi. Many Add-ons (extensions) in Kodi are dependent on the YouTube Add-on. I therefore (of course) had to correct this error and upload a new version (160402) of RaspEX. While I was at it I took the opportunity to install some additional popular Music, Video and Picture Add-ons.

NEWS 160331: A new version of RaspEX especially built for the new Raspberry Pi 3 is ready
I have upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compared to the Raspberry Pi 2 it has:
A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)

Raspberry Pi 3: How much better is it than the Raspberry Pi 2? Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

NEWS 160402 ABOUT RaspEX
My previous version of RaspEX is from 160307. I have now upgraded the whole system, replaced the old kernel, added support for Bluetooth and installed Kodi (XBMC) Media Center as an alternative to the LXDE Desktop. RaspEX Build 160331 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.3), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (160402) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools and PulseAudio for better sound in YouTube.

How do I run Kodi?
You can just start Kodi from the menu while in the LXDE Desktop environment as the ordinary user raspex or as root. Then you can just start adding video and music Add-ons. I suggest that you also add a “Superrepo” – http://srp.nu. Please note that I have already installed some popular Add-ons in Build 160402.

View all installed packages in RaspEX – Build 160402

Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

Screenshots showing additional popular Music, Video and Picture Add-ons in Kodi Media Center.

READ MORE…

2 Comments Exton Linux SystemsLinuxRaspberry

RaspAnd – Build 3 150924/160315 – with Google Play Store, now also for Raspberry Pi 3!

raspex-andex-logoNEWS about RaspAnd 160315
I have uploaded a new version of RaspAnd, which can run also on the new Raspberry Pi 3 computer. It is basically the same system as before. Only the boot parameters are changed.

About RaspAnd 150924
I have finally managed to include Google Play Store in RaspAnd and most important Google Play Services.

NEWS 150924
I have compiled yet another Android 5.1 Lollipop system which can run on Raspberry Pi 2. I call “my” new system RaspAnd Build 3. My first version of RaspAnd is from 150405 and my second from 150527. The following useful apps are pre-installed in Build 3 of 150924: Google Play Store, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, AIDA64, Geekbench, WinZip, FileManager, Rotation Control Lite, WPS Office and Offline Maps. Google Play Store, AIDA64 and Geekbench were not included in Build 2 from 150527.

SCREENSHOTS
Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – Google Play Services updating

Screenshot 4 – Google Play Store update with Aptoide

READ MORE…

1 Comment AndroidExton Linux SystemsLinuxRaspberry

RaspArch Build 160312 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2

rasparch-logoThis version (160312) is my third build of RaspArch
The first version is from 150414. The second is from 151107. This version (160312) is especially made for the new Raspberry Pi 3. Version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, Firefox and Gimp the system increased to 558 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B  or Pi 2 computer.

UPGRADE RaspArch
If you have downloaded and installed my previous version of RaspArch from 151107 you can still use the Micro SD Card with RaspArch on the new Raspberry Pi 3 after a full upgrade of the system. Commands: pacman -Sy followed by pacman -Syu. Most important the old kernel will automatically be replaced by kernel 4.1.19-4-ARCH.

What is Raspberry Pi?

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

WHO should run Arch Linux/RaspArch?

My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

rasparch-screenshot-desktop-small

BENEFITS of Arch Linux/RaspArch
“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop

READ MORE…

1 Comment Exton Linux SystemsLinuxRaspberry